125 Ml Bottles

Compare Tool

Select up to 3 products

125 Ml Bottles
1 - 32 of 92
Sort
View
Show
  • 125 ml Bottle E-Z Sampler

    DWK Life Sciences (Wheaton)

  • 9 Position standards rack with 125 mL bottles for SC-2 DX. Recommended for prepFAST.

  • 125 ml Bottle Spec, Type III Clear, Rub Liner

    DWK Life Sciences (Wheaton)

  • Low-Density Polyethylene Bottles

    Thermo Scientific Nalgene

    …and leakproof; ideal for trace metal analysis Polypropylene screw closures 8, 15, 30 and 60 mL bottles have a 20-415 cap size; 125 and 250 mL bottles have a 24-415 cap size; 500 mL bottles are available with 28-415 and 38-430 cap sizes; 1,000 mL bottles have a 38-430 cap size.

  • Narrow Mouth Polypropylene Bottles

    Thermo Scientific Nalgene

    …chemical resistance Autoclavable Polypropylene screw caps Rigid, translucent walls Leakproof Closure size for 4 mL bottles is 13 mm; 8 mL , 30 mL and 60 mL bottles is 20 mm; 125 mL and 250 mL bottles is 24 mm; 500 mL bottles is 28 mm; and 1,000 mL bottles is 38-400 mm.

  • 9 Position standards rack with 125 mL bottles for SC-4 DX and SC-14 DX. Recommended for prepFAST.

  • … With ground neck With ground glass stoppers 125 mL and 250 mL bottles are furnished with a number 19 Standard Taper stopper; 500 mL bottles are furnished with a number 24 Standard Taper stopper; 1,000 mL and 2,000 mL bottles are furnished with a number 29 Standard Taper stopper.

  • Narrow Mouth HDPE Bottles

    Thermo Scientific Nalgene

    … Durable for long term use 4 mL bottles have a 13 mm closure size; 8, 30 and 60 mL bottles have a 20 mm closure size and also take standard serum stoppers; 125, 175 and 250 mL bottles have a 24 mm closure size; 500 mL bottles have a 28 mm closure size; 1,000 mL bottles have a 38-430 mm size.

  • Bottle Dispensing Autoclavable PPCO 125 ml

    Thermo Scientific Nalgene

    …Polypropylene Copolymer Dispensing Bottles can be used to dispense sterile solutions. Easily view liquid level. May be autoclaved full with cap off spout. Tethered spout cap snaps securely into place and won't pop off or leak when the closed bottle is squeezed. Fine, steady stream…

  • Leak-Resistant Wide Mouth Bottles

    DWK Life Sciences (Wheaton)

    …Color Natural Cap/ Closure Size 38-410 Bottle Material Plastic Bottle Style Leak Resistant Bottle / Vial Style Leak Resistant Capacity (mL or oz) 125mL or 4.23oz Bottle Color Natural Plastic Material Low Density…

  • Wide Mouth Teflon FEP Bottles

    Thermo Scientific Nalgene

    …Autoclavable Usable from -100° to 150°C; bottle without cap usable to 205°C Wide mouth for testing solutions with solids and large-sized samples Closure size for 125 mL bottles is 33 mm; 250 mL bottles is 43 mm; 500 mL bottles is 48 mm; and 1,000 mL bottles is 53 mm. Capacity 2.2 liters …

  • Narrow Mouth Teflon FEP Bottles

    Thermo Scientific Nalgene

    …150°C; bottle without cap usable to 205°C For high purity analysis or storage; these bottles can be rigorously cleaned in boiling nitric acid. Closure size for 30 and 60 mL bottles is 20 mm; 125 and 250 mL bottles is 24 mm; 500 mL bottles is 28 mm; 1,000 mL bottles is 38 mm; 2,000 mL bottles is…

  • Thermo Scientific™ Nalgene Wide-Mouth Packaging Bottles. Made of high-density polyethylene with polypropylene closures are injection blow-molded for strength and uniform wall thickness. Durable, leakproof chemical resistant bottles designed for shipping and storage

  • Narrow Mouth Polypropylene Bottles

    DWK Life Sciences (Wheaton)

    Tested and compared to other containers, Redi-Pak plastic bottles offer many superior advantages   Leakproof, double-seal closure Special no-drip pour lip Standard thread finishes The closure design incorporates a unique double-seal which has been leak-tested under…

  • Wide Mouth Translucent HDPE Bottles

    Thermo Scientific Nalgene

    …2104 Similar to 1717E05 series bottles With polypropylene screw caps More rigid than LDPE type Temperature range 110°C to 120°C 30 and 60 mL bottles have a 28 mm closure size; 125 mL bottles: 38 mm; 250 mL bottles: 43 mm; 500 mL bottles: 53 mm; 1,000 mL bottles: 63 mm.

  • …clear Type III glass bottles feature caps for the 125 and 250 mL sizes that are ultrasonically bonded with a 0.125” PTFE-lined, silicone liner. Caps for the 500 and 1000 mL sizes are equipped with a friction-fit PTFE liner which be easily replaced if necessary. Bottles have a polypropylene…

  • Wide Mouth Translucent LDPE Bottles

    Thermo Scientific Nalgene

    Nalge 2103 series Suitable for shipping liquids Polypropylene screw closure Flexible with excellent impact resistance Leakproof 30 and 60 mL bottles have a 28 mm closure size; 125 mL bottles: 38 mm; 250 mL bottles: 43 mm; 500 mL bottles: 53 mm; 1,000 mL bottles: 63 mm.

  • …safety bottles provide good optical clarity and are mechanically durable. Can be marked with either permanent or temporary markers. 125 mL and 250 mL bottles are furnished with a number 19 stopper; 500 mL bottles are furnished with a number 24 stopper; 1,000 mL and 2,000 mL bottles are…

  • Octagonal Bottles

    Corning® Gosselin™

    Molded Graduations every 25 mL Highly Ergonomic Leakresistant closure system Transparent as glass HDPE Tamper evident screw cap

  • For user convenience, PYREX Erlenmeyer flasks are graduated to show approximate capacity. The 25- 50- and 125 mL flasks are satisfactory for use as a weighing bottle. Erlenmeyer flasks come with a PYREX Standard Taper stopper.

  • bottle through the center tube and exits into the bottom of the bottle. On rising through the washing or drying medium it is thereby washed or dried and passes out of the bottle through the side tube of the bottle stopper. Both inlet and outlet tubes accept 1/4 inch I.D. flexible tubing. The 125 mL

  • … Tubulation o.d.’s are 8 mm Offered in 125, 250 and 500 mL capacities, with coarse (C) 40 to 60 microns pore size porosity disc; and extra coarse (EC) 170 to 220 micron size porosity. 125 C bottle is 300 mm tall; 250 EC and 250 C bottles, 305 mm; 500 EC and 500 C bottles, 350 mm.

  • …Color-coded: 5 colors No need to buy large quantities 3 sizes: 125, 250 and 500 ml Versatile There’s no need to buy packages of multiple color wash bottles just to get one of each color. These low density polyethylene wash bottles are soft and easy to use. The color-coded polypropylene…

  • AGI ICP-MS Tuning Solution 1

    Inorganic Ventures

    Inorganic Ventures' AGI ICP-MS Tuning Solution 1 is a 125 mL certified reference material set in a nitric acid matrix for stability. This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . To obtain COA…

  • …preventing contamination by solubility or pH change With dropping bulb and pipet, Standard Taperground-glass stopper Stopper for 30 mL size is not standard Standard Taper. IMPORTANT: stopper is not covered by Standard Taperspecifications, but ground to an interchangeable 1:10…

  • …Amber Type III Glass Bottles feature caps for the 125 and 250 mL sizes that are ultrasonically bonded with a 0.125” PTFE-lined, silicone liner. Caps for the 500 and 1000 mL sizes are equipped with a friction-fit PTFE liner which can easily be replaced if necessary. Bottles have a polypropylene…

  • 1000 ppm Antimony for AA

    Inorganic Ventures

    …to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . Size: 125 or 500 mL Matrix: Nitric Acid (tr. Tartaric Acid)  (HNO3 / Tartaric Acid) Starting Material: Sb metal …

  • These 125mL PYREX® atomizers are used for spraying reagents onto thin layer chromatography plates. They have a full length 24/40 Standard Taper joint between the reservoir and spraying device.

  • …ergonomic cap handling Narrow bottle diameter allows more efficient storage on shelves, refrigerators, autoclaves. Bottles are graduated to their full working volumes Available in four sizes: 125 mL, 250 mL, 500 mL, and 1 L Pyrex Slim Line bottles are made from the same Type 1 Class…

  • …is designed to hold a Fernbach flask. All flask clamps 125 mL and larger feature a spring to hold flasks in place. Flask clamps are constructed of stainless steel and are supplied with a flat head screw for attachment to platforms. Media bottle clamps feature stainless steel construction and have a…

  • bottle is designed for general purpose use and for determining the oil absorption of pigments (ASTM D281). Provided with a medium length Standard Taper pipet dropper and a rubber nipple The 30 and 60 mL sizes are designed from Federal Specification A-A-5134 requirements The 125 mL size…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.