12 Port Vacuum Manifold

General purpose single bank vacuum manifold with 3, 4, or 5 ports. Main tube is 38mm OD with a serrated hose connection, having the smallest serration 13.5mm and the largest serration 15.5mm, located at either the left or right side for vacuum connection. Ports are either 0-4mm or 0-8mm…

…other vacuum manifolds, the Visiprep system contains a patented valve system that allows for precise flow control through each SPE tube via rotating, independent, screw-type valves situated in each port within the manifold cover. Visiprep vacuum manifolds allow you to process up to 12 (12-port…

All-glass-and-PTFE vacuum manifold with three, four or five stopcock ports. Each port is a variable opening, 0-10mm, high vacuum threaded stopcock. Plugs are PTFE with Nylon or PTFE handles and FETFE O-Rings. Ultimate vacuum of 10-7 can be realized with O-Rings as supplied. For bakable systems,…

Glass Manifold with #15 Ace-Thred at either end To allow switching 5853 vacuum connection to left or right side. Supplied with three or five, 4mm straight bore PTFE stopcock sampling ports. (Additional ports can be ordered.) Overall length of glass manifold is 230mm. Complete item consists of 8763…

Straight sampling manifold, available with one end threaded, the other end reduced for use with 7506 bushing, or both ends threaded for use with either 7506 bushing or 5841 coupling. Also available with adjustable depth, threaded sampling ports for use with up to 7mm O.D. tube. Code identifies I.D.…

Manifold flow control valve are disposable liner flow control valves that are used as an accessory for 12 port or 24 port Visiprep manifolds. Application: Solid-phase extraction (SPE) experiments were performed using a Visiprep DL disposable-liner solid-phase extraction vacuum manifold with…

…vacuum manifolds for SPE sample preparation, filtration, and elution are available in 12- and 24-port configurations. These manifolds help in achieving consistent extraction and filtration results. Multiple sample processing with these manifolds simplifies procedures and saves time. The manifolds…

For use with standard, 12- and 24-port models (optional use with 57030-U & 57250-U), stainless steel.

…other vacuum manifolds, the Visiprep system contains a patented valve system that allows for precise flow control through each SPE tube via rotating, independent, screw-type valves situated in each port within the manifold cover. Visiprep vacuum manifolds allow you to process up to 12 (12-port…

Synonyms: Preppy(TM) 12 PORT RACK PLATE, 15 & 20ML VIALS Application: Recommended 15 mL vials compatible with this product: Cat. No. 27159, 27008, 27014-U. Recommended 20 mL vials compatible with this product: Cat. No. Z190527, 190523-1PAK. Legal Information: Preppy is a trademark of…

SPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…

…SPE port for precise flow control Glass basin will not dissolve, fog, or discolor when exposed to solvents Legs on cover allow user to easily rest cover on work surface when removed from the manifold Screw-type solvent-resistant vacuum bleed gauge and valve offer better sealing and vacuum…

…manifolds and accessories complement the quality of AccuBOND II sorbents. Flexible configurations and availability as complete assemblies or individual components mean that the user has the necessary capability at any stage from method development to high throughput operation. Vacuum manifold…

SPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…

SPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used.  Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump.  Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of…

SPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…

…12L or 18L FreeZone Freeze Dryer. Type 304 Stainless Steel complete with 8 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flask. 14-Port Manifold for FreeZone Console Freeze Dryers (1177K16): 14-Port Manifold for use with 6L, 12L…

…CG-468-02 greased glass stopcocks on all of the 4-ports. The end cap on the vacuum line is a #30 o-ring joint while the inert gas line has a #9 o-ring joint instead of the 14/20 standard taper joint. All gauging ports (B) are constructed using #9 o-ring joints and are supplied complete with adapters…

Vacuum/gas manifold with a Firestone Rapid Purge Valve at one end and 0-5mm High Vacuum, Easy Action PTFE Stopcock ports with 3/8" 0.D. Swagelok tubing connections. Each connection has an O-Ring groove (O-Rings supplied) for use with #11 Ace-Thred. Valve eliminates the need for a second tube.…

Single tube vacuum manifold with 35/20 ball joint ends. Available with 3 or 4 high vacuum stopcock ports. Order with inner joint port ends (14/20 or 24/40) or #15 o-ring joints. The distance between the ports is 95mm, ideal for flasks up to 250mL. Please see our various o-ring joint adapters such as…

Glass Manifold with #15 Ace-Thred at either end to allow switching vacuum connection to left or right side. Supplied with three or five 0 - 4mm High Vacuum, Easy Action Stopcocks for sample ports. Plugs are PTFE with Nylon hooded handles and FETFE O-Rings. Ultimate vacuum of 10 - 7 can be realized…

…shield helps retard heat transfer. Each port individually controlled by smooth acting, semi-needle, threaded PTFE plug to allow removal of one tube while others are still under vacuum; 10-6 vacuum is common. O-Rings are FETFE or Viton. Complete:glass manifold, PTFE plug(s), bushing(s), with fire…

Single tube vacuum manifold with #15 o-ring connections on ends. Available in either 3 or 4 port configuration with 0-10 Easy Action stopcocks. Order with either 14/20, 24/40 inner joints or #15 o-ring joints on ports. Distance between ports is 95mm which allows for use of flasks up to 3 Liters.…

Single tube vacuum manifold with #15 o-ring joint ends. Available with 3 or 4 high vacuum stopcock ports. Order with inner joint port ends (14/20 or 24/40) or #15 o-ring joints. The distance between ports is 95mm, ideal for flasks up to 250mL. Please see our various o-ring joint adapters such as Ace…

Allows switching from pressure to vacuum in a matter of seconds. Quiet, oil-free unit will not contaminate the extraction system or your samples. Provides 20" Hg (68 kPa) vacuum or 18 psi (124 kPa) pressure. Not recommended for use with 24-port manifold. Warranty period is one year from…

Double tube vacuum manifold with #15 o-ring joints at both ends. Available in either a 3 or 4 port configuration with 4mm bore glass double oblique stopcocks. The ports can be ordered in 14/20, 24/40 standard taper or #15 o-ring joints. The distance between ports is 210MM which allows for use of…

Double tube vacuum manifold with 4 x #15 o-ring joint ends. Available in 3 or 4 port configuration with Easy Action 0-10MM stopcocks. The ports can be ordered with either 14/20, 24/40 inner joints or #15 o-ring joints. Distance between ports is 100MM which will allow for flasks up to 250mL. Please…

…tube vacuum manifold with 35/20 ball at one end and two 24/40 outer standard taper joints at the other end. Available in either 3 or 4 port configuration with 4mm double oblique stopcocks. Can be ordered with 14/20, 24/40 inner joints or #15 o-ring joints on each port. Distance between ports is…

SPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…

SPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…

SPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…