100 Mm Plate

Designed for simultaneous studies of organisms in a common environment Four marked compartments for easy identification ISO Mark Target for orientation Disposable (single use) Polystyrene petri dish for general microbiological use Molded from medical grade virgin polystyrene …

Designed for simultaneous studies of organisms in a common environment Two marked compartments for easy identification ISO Mark Target for orientation Disposable (single use) Polystyrene petri dish for general microbiological use Molded from medical grade virgin polystyrene …

Designed for simultaneous studies of organisms in a common environment Two marked compartments for easy identification ISO Mark Target for orientation in automated filling and streaking equipment Disposable (single use) Polystyrene petri dish for general microbiological use Molded from…

Designed for simultaneous studies of organisms in a common environment Three marked compartments for easy identification ISO Mark Target for orientation Disposable (single use) Polystyrene petri dish for general microbiological use Molded from medical grade virgin polystyrene …

…compared to a standard 100 mm dish Fully stackable lid is also slippable for use in automation ISO Mark Target for orientation in automated filling and streaking equipment Space saver lid allows 600 dishes in a standard case (compared to 500 dishes) Nominal 100 mm lid diameter …

High profile dish for increased media volume allows longer culture periods Ideal for seed germination testing Ideal for use in Automation Disposable (single use) Polystyrene petri dish for general microbiological use Molded from medical grade virgin polystyrene Optically-clear …

Deeper dish accommodates extra media volume Increased media volume allows longer culture periods Ideal for seed germination testing Disposable (single use) Polystyrene petri dish for general microbiological use Molded from medical grade virgin polystyrene Optically-clear Radiation…

Deep dish for increased media volume Increased media volume allows longer culture periods ISO Mark Target for orientation in automated filling and streaking equipment Disposable (single use) Polystyrene petri dish for general microbiological use Molded from medical grade virgin…

Low profile dish saves space in incubators and storage Clear top and bottom viewing surfaces Disposable (single use) Polystyrene petri dish for general microbiological use Molded from medical grade virgin polystyrene Optically-clear Radiation sterilized Contents sterile if sleeve…

Standard slippable petri dish Designed for automated filling and streaking systems Side Arrows and ISO Mark Target for automation Disposable (single use) Polystyrene petri dish for general microbiological use Molded from medical grade virgin polystyrene Optically-clear Radiation…

…less carbenicillin than high-copy-number plasmids. 100 µg/mL carbenicillin is the most commonly used concentration. Typically, 100 mm round plates are for growth/selection, while 150 mm round plates are for screening. Rectangular plates can be used with automated systems. Grids can be…

… Typically, 100 mm round plates are for growth/selection, 150 mm round plates are for screening, rectangular plates can be used with automated systems, and grids can be helpful when counting colonies. Contains 1.0% (10 g/L) tryptone, 0.5% (5 g/L) yeast extract, 1.0% (10 g/L) sodium chloride, 100…

…kanamycin is the most commonly used concentration. Typically, 100 mm round plates are for growth/selection, while 150 mm round plates are for screening. Contains 1.0% (10 g/L) tryptone, 0.5% (5 g/L) yeast extract, 1.0% (10 g/L) sodium chloride, 100 µg/mL kanamycin, and 1.5% agar.

…YPD Agar Plates are for growth and maintenance of yeast, such as Saccharomyces cerevisiae. Typically, 100 mm round plates are for growth/selection, and 150 mm round plates are for screening. Standard fill volume for 100 mm plates is 25 mL. We also offer a thicker agar plate in the 100 mm size (40…

…Plates have a highly reflective surface, low autophosphorescence, and minimum capillary action. Plates are suitable for luminescence applications including scintillation proximity assay. Working range is 10-100 µL/well. Plates are constructed of polypropylene and measure 128 x 86 mm. Plates…

…for the study of both anchorage-dependent and anchorage-independent cell lines. Inserts allow polarized cells to feed basolaterally and thereby carry out metabolic activities in a more natural fashion. Both the 0.4 µm and 3.0 µm pore size units are packaged in a 100mm dish with 12 inserts per case.

…Typically, 100 mm plates round plates are for growth/selection, while 150 mm plates round plates are for screening. Rectangular plates can be used with automated systems. Contains 1.6% (16 g/L) tryptone, 1.0% (10 g/L) yeast extract, 0.5% (5 g/L) sodium chloride, 2% glucose, 100 µg/ml…

Suitable for automated equipment (No stacking rim on lid) Clear top and bottom viewing surfaces Disposable (single use) Polystyrene petri dish for general microbiological use Molded from medical grade virgin polystyrene Optically-clear Radiation sterilized Contents sterile if…

Transparent, permitting use on colored background, with shallow, concave wells 9 well plate is 85 x 100 mm; wells are 22 mm o.d. x 7 mm deep

…hazards of flame and ethanol No need for fragile glass "hockey sticks" Sterile Roll & Grow Plating Beads are provided in two skirted 50 mL conical tubes. Between six and seven 4 mm glass beads are used per plate for a total of approximately 160 standard 100 mm plates.

…grow and often cause infections of the skin, hair, and nails), and aciduric microorganisms (organisms able to grow in the presence of acid). Typically, 100 mm round plates are for growth/selection, while 150 mm round plates are for screening. Contains 1% tryptone, 4% dextrose, and 1.5% agar.

…optimize growth conditions by supplementing with additional sodium chloride.] Typically, 100 mm round plates are for growth/selection, 150 mm round plates are for screening, and rectangular plates can be used with automated systems. Contains 1.0% (10 g/L) tryptone, 0.5% (5 g/L) yeast extract,…

…that the fastidious respiratory bacterium Haemophilus influenzae requires for growth. Typically, 100 mm round plates are for growth/selection, 150 mm round plates for screening, and rectangular plates can be used with automated systems. (IsoVitalex is a registered trademark of BD Corp.)

LB Agar Plates (Miller formulation) with Carbenicillin, 60 µg/mL X-Gal, 0.1 mM IPTG are used for growth and blue-white colony screening to detect vector-based, recombinant DNA clones in E. coli (colonies with inserts appear white and colonies with no inserts appear blue). Carbenicillin selects…

…(USP) and for plate count enumeration tests for dairy products, foods, and cosmetics. It contains nutrients (potato infusion and dextrose) that lead to the robust growth of most fungi. Typically, 100 mm round plates are for growth/selection, while 150 mm round plates are for screening.…

…chloride is added to maintain the osmotic equilibrium. TSA plates are non-selective and non-differential plates. Typically, 100 mm round plates are for growth/selection, 150 mm round plates are for screening, and rectangular plates can be used with automated systems. Contains 1.5% (15 g/L)…

…It is often used in food safety, water safety, and antibiotic sensitivity tests. Typically, 100 mm round plates are for growth/selection, while 150 mm round plates are for screening. Rectangular plates can be used with automated systems. Grids can be helpful when counting colonies. Contains…

Slide boxes are perfect for storage or transportation of standard size slides (25 x 75 mm and 1 x 3"). Molded, rigid boxes securely hold slides in grooved slots Durable ABS plastic boxes are available with either cork or foam lining Both the lining and the slots are numbered to…

…less carbenicillin than high-copy-number plasmids. Note: 100 µg/mL carbenicillin is the most commonly used concentration. Standard fill volume for 100 mm plates is 25 mL. We also offer larger fill volumes (80 mL) for 150 mm plates.  Contains 1.0% (10 g/L) tryptone, 0.5% (5 g/L)…

…softening temperature: 107 C •Melting point: 132 C Application: P-LENE 4 Polypropylene 3D Printing Parameters •Extruder (nozzle) temperature: 245 +/-10 C •Bed temperature: 100 +/-10 C •Print speed: 60 - 80 mm/s •Fan: 50-100 % •Minimum nozzle diameter: 0.3 mm •Plate materials: LENEPATE