100 Ml Glass Centrifuge Tube

These 100mL PYREX® pear-shaped centrifuge tubes are used for determination of water and sediment in petroleum products. They are fabricated from mold-blown blanks to insure uniform shape and greater mechanical strength. The scale and figures are durable white enamel which stand out clearly against…

Calibrated "to contain" (TC), this Goetz-type borosilicate glass bulb oil centrifuge tube is a pear shaped tube, similar to LG-4420, but it has a lower stem calibrated to hold 1.5mL. Specified in ASTM Method D 96 as suitable for a number of tests on petroleum products. Reference No.…

Graduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…

Can be used in the determination of residues in liquified petroleum (LP) gases, ASTM Method D 2158 Calibrated "to contain" Capacity 100 mL Graduations: 0 to 1 in 0.05 mL Dimensions: 37 mm o.d. x 203 mm L.

KIMAX tube used for the determination of small quantities of solids in large volumes of liquids. Calibrated to contain. Stem is graduated in 0.01 mL to 0.2 mL and the body has graduations at 25, 50, and 100 mL. Recommended for the determination of free water and sediment in diesel and other…

Without stopper, pear shaped 58 mm o.d. x 159 mm long Lower stem graduations: graduated upward from 0 to 1 mL in .05 mL divisions Bulb graduations:  from 1 to 5 mL in 1 mL   from 5 to 50 mL in 5 mL   from 50 to 100 mL in 10 mL divisions

…greater mechanical strength Capacity 100 mL Stem has white graduations from 0 to 1.5 mL in 0.1 mL divisions; body is graduated from 1.5 mL to 5 mL in   0.5 mL divisions, from 5 mL to 10 mL in 1 mL divisions and at 15, 20, 25, 50 and 100 mL . Dimensions: O.D. 43.5 mm to 44.5 mm…

…strengthened Can be centrifuged up to 13,100 RCF (with appropriate rubber sleeve adapter in a 50 mL rotor cavity) 15 mL and 30 mL reusable tubes achieve greater mechanical strength than standard glass centrifuge tubes. Manufactured from Type 1, Class B, borosilicate glass, they are fully…

… Oil Centrifuge Tube (2623Q33) In accordance with ASTM D 96 Capacity 125 mL Graduations: from 5 to 10 in 1 from 10 to 25 in 5 at 50 and 100 per ASTM Standard D 96 Fits Thomas number 2525C07 Carrier and 2525C05 Rotor in IEC Centrifuges.

Graduated upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane…

KIMAX® conical bottom centrifuge tube is used for testing of petroleum products according to ASTM D91, D893 and D1796. Tube has a permanent red stripe under the white enamel graduations for easy reading of results Scale and legend are durable white ceramic enamel Top is tooled to…

Calibrated "to contain" (TC), this borosilicate glass long oil centrifuge tube is used for determinations of water and sediment in petroleum and its products, including fuel oils and lubricating oils. See ASTM Methods D 96, D 1796 and D 91 and also API Code 2500. Reference No. ASTM D…

These 100mL PYREX® round bottom centrifuge tubes are useful for the handling of sputum specimens. Digestion, shaking, neutralizing and centrifuging can be performed in one container. They are also useful for other clinical and microbiological tests. Screw caps resist the effects of temperature…

…Load: 10 Lbs Maximum Bottle Length: 10" Bottle Speed: 0.1 - 30 rpm (Depending Upon Bottle Tube Diameter) +/- 5%. Typical Maximum Speeds: 16 mm OD Test Tube 28 rpm, 15 Ml Centrifuge Tube 18 rpm, 38 mm OD X 200 mm Bottle 8.5 rpm, 115 mm OD Roller Bottle 4.0 rpm. Environmental Conditions,…

KIMAX tube used in the determination of water and sediment in crude mineral oils, fuel oils and other petroleum products D1796 and MPMS 10.4 standards); in determination of volume of precipitate formed by centrifuging definite quantities of steam cylinder stocks and black oils and other lubricating…

…SAMPLE TUBES, A coaxial insert consists of an upper glass alignment tube with a precise outer diameter that fits very closely within the matching 5mm or 10mm thin wall outer glass NMR tube, ensuring accurate coaxiality and centering of the insert within the outer NMR tube.The lower glass stem tube,…

…g EDTA in 80 ml double dist. water and stir. Adjust pH 8.0 ± 0.1 with 1 M NaOH. EDTA solubilizes at alkaline pH only. After solubilization fill up to 100 ml with double dist. water. TBE-Buffer Dissolve 5.4 g Tris, 2.8 g Boric acid in 800 ml double dist. water and add 2 ml of 0.5 M EDTA…