10 Ml Volumetric Flask
-
PYREX Micro Volumetric Flasks
Corning…stability of this small flask, a hexagonal base, similar to those on all cylinders, has been added. The graduation line is sharp and permanent and the white markings are easy to read. Flasks with capacities of 1, 2 and 5 mL come with a No. 8 PYREX stopper while 10 and 25 mL capacity versions…
-
Class A Volumetric Flasks
BrandTech®…applications. Polymethylpentene (PMP) and polypropylene (PP) volumetric flasks offer a break-resistant alternative to glass. Class B per DIN EN ISO 1042. Supplied with matching PP standard taper joint stoppers. Flasks’ 10 mL size allows for accurate measurement of smaller volumes. …
-
Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions
-
KIMAX Brand Class A Volumetric Flasks
DWK Life Sciences (Kimble)…(4997L15 to L65) Flasks have marking spots on all sizes 10 mL and larger. The 2 mL size is test tube shaped; all other sizes are conventional flask shape. The 5 mL and larger sizes are designed from requirements for Type 1, Class A “unserialized” flasks of Federal Specification…
-
These PYREX® EZ Access™ wide mouth volumetric flasks are calibrated to Class A tolerances and are designed for microchemical work. The heavy duty, wide mouth facilitates filling and mixing. Supplied with interchangeable Standard Taper PYREX® ground glass stopper. The graduation line is…
-
Micro Class A Volumetric Flasks
DWK Life Sciences (Kimble)…Made to the following tolerances: 1 mL: ±0.01 mL; 2 mL: ±0.015 mL; 5 and 10 mL: ±0.02 mL; 25 mL: ±0.03 mL 1, 2 and 5 mL flasks take Standard Taper 8 stopper; 10 and 25 mL flasks take Standard Taper 9 stopper For micro-chemical work, sizes 1 through 5 mL are designed in accordance with the…
-
Polymethylpentene (PMP) and Polypropylene (PP) volumetric flasks provide a break-resistant alternative to glass. Flasks meet Class B per DIN EN ISO 1042. Flasks are supplied with matching PP screw cap or stopper. The 10 mL size allows for accurate measurement of small volumes. Screw cap…
-
With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C
-
Polymethylpentene (PMP) and Polypropylene (PP) volumetric flasks provide a break-resistant alternative to glass. Flasks meet Class B per DIN EN ISO 1042. Flasks are supplied with matching PP screw cap or stopper. The 10 mL size allows for accurate measurement of small volumes. Screw cap or…
-
…heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are test-tube shaped and do not include snap caps. 10 mL through 2,000 mL sizes are supplied with snap caps.
-
…with ASTM Standard E 237 Made to the following tolerances: 1 mL : ±0.01 mL ; 2 mL : ±0.015 mL ; 5 and 10 mL : ±0.02 mL ; 25 mL : ±0.03 mL 1, 2 and 5 mL flasks take Standard Taper 8 stopper; 10 and 25 mL flasks take Standard Taper 9 stopper Reference: ASTM E-237
-
KIMAX Brand Volumetric Flasks With Stopper
DWK Life Sciences (Kimble)…are designed from ASTM Specification E288, Class B requirements Sizes 10 through 50 mL include Standard Taper 9 glass stopper; size 100 mL, Standard Taper 13; sizes 200 and 250 mL, Standard Taper 16, size 500 mL, Standard Taper 19; 1,000 mL, Standard Taper 22 and size 2,000 mL, Standard Taper 27
-
Low actinic stained glass provides protection for materials sensitive to light. The protective color is an integral part of the flask, which retains the mechanical strength, chemical stability and thermal resistance of PYREX brand hardware.
-
…make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A volumetric flasks have been manufactured to Class A tolerances as established by ASTM E- 694 for volumetric ware, ASTM E-542 for calibration of volumetric ware and ASTM E-288 for volumetric flasks.
-
…is sharp and permanent. Large white block letters make the inscription easy to read. These Class A volumetric flasks have been manufactured to Class A tolerances as established by ASTM E- 694 for volumetric ware, ASTM E-542 for calibration of volumetric ware and ASTM E-288 for volumetric flasks.
-
Calibrated "to contain" at 20°C Accuracy tolerances approximately twice those specified for Class A
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
…read. These Class A volumetric flasks are calibrated to Class A tolerances in accordance with ASTM E-542 and E-288. Each flask is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST standards. For your convenience, these flasks are supplied with…
-
…takes 1/4″ vacuum tubing. PP collection vessel rack accommodates autosampler vials; small scintillation vials (22.75 mm O.D. recommended); 10 and 16 mm test tubes; and 1, 2, 5, and 10 mL volumetric flasks. An optional plate for 20 mL scintillation vials is available for 12-port models.
-
Disposable Polypropylene Weighing Funnels
TWD TradeWinds, Inc.…flat on a balance. Small size fits volumetric flask volumes (mL) of 5, 10, 15, and 20. Medium size fits volumetric flask volumes (mL) of 100, 200, 250. Large size fits volumetric flask volumes (mL) of 500, 1000. X-Large size fits volumetric flask volumes (mL) of 1000, 2000.
-
Visiprep™ SPE Vacuum Manifold, Standard, 24-Port Model
MilliporeSigma…takes 1/4″ vacuum tubing. PP collection vessel rack accommodates autosampler vials; small scintillation vials (22.75 mm O.D. recommended); 10 and 16 mm test tubes; and 1, 2, 5, and 10 mL volumetric flasks. An optional plate for 20 mL scintillation vials is available for 12-port models.
-
NPW - Settleable Solids, NELAC range 5.0-50 mL/L
NSI Lab SolutionsA natural solid for quantitative transfer to a 1 liter Class A volumetric flask with dilution to 1 liter in reagent water. Formulated in the NELAC range of 5.0 - 50 mL/L. Each vial produces 1 liter of sample. (Supplied in duplicate)
-
Ergoclips
Mettler Toledo1228Z88 ErgoClip helps to perfectly position volumetric flasks of 1-10 mL. It allows directly dosing into the desired tare container. Dosing in directly means avoiding transfer errors, thus precious substances can be saved. 1228Z89 ErgoClip helps to perfectly position several tubes (test…
-
Hippurate Hydrolysis Broth
HiMedia…ml. Concentrated hydrochloric acid: 5.4 ml Add approximately 75 ml of distilled water to a 100 ml volumetric flask. With a transfer pipette, add 5.4 ml of HCl to the flask, running down the acid along the sides of the flask. Add 12 gram of ferric chloride. Dissolve by warming the flask…
