10 Ml Beakers

…can be easily seen through translucent wall Low form beakers have spout and ribs on rim Size 15 mL graduated in 5 mL and 18 oz. intervals; sizes 30 and 50 mL in 5 mL and 14 oz.; sizes 100 and 150 mL in 5 mL and 12 oz.; size 250 mL in 10 mL and 1 oz.; and sizes 400 and 600 mL in 25 mL and 1 oz.

KIMAX® Low Form Griffin glass beakers offer excellent mechanical strength and durability, while providing high resistance to chemical attack and thermal shock. They have been a staple in research laboratories for many generations. Thick, slightly flared, beaded top, with a spout designed…

Tri-Pour Beakers have a pour spout on three sides with easy-to-read graduations on the outside of each beaker Polypropylene Graduated: 10 to 50 ml in 10 ml increments and .5 to 1.5 oz in .5 oz increments.

…polystyrene, resistant to diluted or weak acids, alcohols and bases Usable to 200°F, with four-way pour spouts Smaller sizes suitable for use as sampling cup for atomic absorption units, flame photometers and blood cell counters. Graduations on 150 mL and larger, accurate to ±5%.

…and mechanical strength. For convenience, the 250 through 4000 mL beakers have a double graduated metric scale to indicate approximate content. All sizes have an extra large marking spot. Assortment pack consists of one of each: 50 mL, 100 mL, 250 mL, 600 mL, and 1 L. Reference: ASTM E-960.

…International Standards for Laboratory Plasticware Accuracy. Graduation intervals: 30 and 50 mL sizes: 5 mL intervals; 100 and 150 mL : 10 mL intervals; 250 mL : 25 mL intervals; 400 and 600 mL : 50 mL intervals; 1,000 mL : 100 mL intervals; 2,000 mL : 400 mL intervals; 4,000 mL : 500 mL intervals.

…Griffin Beakers with spout are manufactured to provide balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 1000 mL beakers have a double graduated metric scale to indicate approximate content. All sizes have an extra large marking spot. The 10 mL size…

These disposable, yet sturdy polypropylene beakers feature three pouring lips for drip-less dispensing. Beakers are graduated in both ounces and ml. Assortment of 5 each 50ml, 100ml, 250ml, 400ml, 800ml, and 100ml Tri-Pour Beakers.

…to glass. Class B per DIN EN ISO 1042. Supplied with matching PP standard taper joint stoppers. Flasks’ 10 mL size allows for accurate measurement of smaller volumes. These beakers are suitable for sterilization using heat, gas, and chemical methods for sensitive biological applications

Polypropylene beakers are highly flexible; a gentle squeeze creates a spout anywhere on the rim. Beakers feature a large writing area and are graduated in both oz. and ml. Stacking the ribs prevents the beakers from sticking together. 120ml/4 oz capacity, Graduation intervals of 10ml/0.5 oz,…

Made of polypropylene Tricorn™ beakers provide three dripless pouring spouts. Tough, unbreakable and suitable for use with commonly used acids, alkalies and solvents. Autoclavable.

Corning 1010 Handle attached by an adjustable, stainless steel strap which fits securely into a shallow groove molded in upper part of beaker Beaker (1530K40) fitted with molded glass handle which facilitates pouring. Replacement beaker (1530K50) supplied without handle or strap.

Designed from ASTM E 960 Type III 100 mL size graduated in 10 mL intervals; 200, 300 and 400 mL sizes in 25 mL intervals; 500, 600 and 1,000 mL sizes in 50 mL intervals.

The LaMotte 50 mL beaker is suitable for use in research facilities and chemical laboratories. This glass beaker is used to stir, mix and even heating liquids while conducting experiments.

…thickness resulting in the optimum balance between thermal shock resistance and mechanical strength. Key Features Capacity of 10 mL to 3000 mL available Catalog numbers 20229-20 to 20229-3000 have double-graduated metric Meets ASTM E-960 Type I Specifications Easy-pour spout…

…These beakers do not contain graduation markings - designed to be filled to the brim to realize full vessel capacity. Useful for storing, mixing, and heating solutions in laboratory and production settings when durability and easy sterilization is desired. Available in sizes from 100 mL to 5000 mL.…

…2.0mL microcentrifuge tubes at elevated or reduced temperatures in water or ice baths Round-style racks fit conveniently inside 400 or 1000mL beakers Racks will float with a full load of filled tubes Tubes are supported below the lip while conical ends are immersed in water On benchtop,…

…Select the right Eppendorf Maxitip which meets your needs. The Eppendorf Maxitip P is designed for aspirating 1 mL to 10 mL, for example from beakers. The Eppendorf Maxitip S for 2.5 mL to 10 mL forms a system with the Maxitip and is used for aspirating liquid from tall, narrow-necked vessels.

Bottle Beakers® are excellent for use with biological and pathological specimens, but can also be used for storing industrial laboratory chemicals and reagents. They are designed with a slight shoulder for easy pouring and handling. Graduated in mL and ounces. Mix, measure, and store in the same…

Heavy Wall Beaker, Low Form, Dual Graduation, 250 mL, 10/pack

…at the top. The unique design allows the user to submerge the flask in an oil bath almost to the bottom seal on the cooling jacket thereby avoiding premature condensation. 25 mL size has a 34/45 joint; 50 mL size has a 45/50 joint. Vacuum tube on both sizes will accommodate 10 mm I.D. tubing.

…to hold tiny parts.  These baskets fit inside beakers. Beaker supports and beakers Flat stainless steel tank covers with 1 or 2 holes support either 600 mL or 1000 mL beakers.  The beakers come with plastic lids. The beaker assembly can be used with flammable solvents when…

…small beakers Compatible with all homogenizer models Thomas No. 1204B85 and 1204B86 Recommended for large beakers and containers Compatible with PRO250 and all benchtop homogenizer models Thomas No. 1204B87, 1204B88 and 1204B89 Recommended for large beakers…

…sample swirl Threaded ball valve Strong and durable beakers closely duplicate actual water treatment operating conditions to improve dosage accuracy. Reduce spillage during high RPM mix and stop sample rotation quickly. Provide a 10 cm setting distance as required for jar-test procedures.…

… For 10 Lab Groups Packing Column 20 min. Column Sep. 40 min. ? Kit includes:  instructions, sample mixture, chromatography columns, dry matrix, elution buffer, transfer pipets, microtest tubes. You need:  50 or 100 ml beakers, 25 ml beaker or test tube,…

…cleaning. Useful for applications like measuring, mixing, and sample gathering. Can be used with liquids, pastes, powders and granules. Available in 250 mL, 500 mL, and 1000 mL sizes. Sold individually. REUZ™ products from United Scientific promote sustainability in all laboratory environments.

…or buffer exchange of volumes between 10 mL and 20 mL •Preparation of protein samples for MALDI-MS •Sample concentration •Large-scale protein dialysis such as antibodies and recombinant protein purification •Peptide dialysis for molecules as small as 10 amino acids •Virus-particle purification…

…or buffer exchange of volumes between 10 mL and 20 mL •Preparation of protein samples for MALDI-MS •Sample concentration •Large-scale protein dialysis such as antibodies and recombinant protein purification •Peptide dialysis for molecules as small as 10 amino acids •Virus-particle purification…

…or buffer exchange of volumes between 10 mL and 20 mL •Preparation of protein samples for MALDI-MS •Sample concentration •Large-scale protein dialysis such as antibodies and recombinant protein purification •Peptide dialysis for molecules as small as 10 amino acids •Virus-particle purification…

…or buffer exchange of volumes between 10 mL and 20 mL •Preparation of protein samples for MALDI-MS •Sample concentration •Large-scale protein dialysis such as antibodies and recombinant protein purification •Peptide dialysis for molecules as small as 10 amino acids •Virus-particle purification…

…or buffer exchange of volumes between 10 mL and 20 mL •Preparation of protein samples for MALDI-MS •Sample concentration •Large-scale protein dialysis such as antibodies and recombinant protein purification •Peptide dialysis for molecules as small as 10 amino acids •Virus-particle purification…

…or buffer exchange of volumes between 10 mL and 20 mL •Preparation of protein samples for MALDI-MS •Sample concentration •Large-scale protein dialysis such as antibodies and recombinant protein purification •Peptide dialysis for molecules as small as 10 amino acids •Virus-particle purification…