10 Micron Filter

…size 10 in. (25cm) double open-ended cartridges have 2 Buna-N gaskets for positive seal Pleated membrane has 4.75 sq. ft. (0.46m 2 ) surface area Recommended flowrate: 2 gal./min. (7.5L/min.) Autoclavable at 118°C (245°F) For Use with: Economy Filter Holders 09-034-155,…

…Barnstead 1/2 Size B-Pure Filters will meet all of your prefiltration needs. The filters can be used to pretreat feed water or act as a final filter to ensure consistently pure water. 5 Micron Pre-Filter for B-Pure 1/2-Size Holder 5µm pore size 10 in. L (25.4cm); Dia.:…

Replacement 10 micron filter for P/N 09903665.

Digi FILTER  for filtering wastewater, soil and dirty samples prior to AA or ICP analysis. Dual-headed cap made from virgin polypropylene, Digi FILTER s offer low leachable metal content. A 0.45 micron Teflon membrane inserted in everyDigi FILTER  guarantees 98% particle retention.

… Includes filter assembly, one oil mist filter cartridge and one odor filter cartridge Oil mist filter cartridge life is approximately 1 year and odor filter cartridge life is approximately 6 months at 1.33 x 10-2 mBar (10 microns) vacuum Replacement oil and filters for General Purpose…

Small volume filter Reactor. Complete item includes: Reactor Body, head (14/20 joints), Clamp, PTFE Bottom Adapter with CAPFE O-Ring, 350 micron polypropylene screen support, 100 micron polyethylene support, 5844 Adapter, 5839-42 Shutoff Valve, 8066-12

…Filter System Ideal for Twin configuration water filter systems Keep ice makers functioning at full capacity Reduce up to 99.9% of disinfectant chlorine from incoming water supply, eliminating off tastes and odors of the ice Will filter out dirt and rust particles as small as 1/2 micron…

The LabStrong FL0016-1 Final Filter is comparable to the Thermo Scientific Barnstead* D3750 Final Filter. The LabStrong 0.2 micron (µm) Final Filter is designed for use in ultrapure water purification systems. The final filter can be used with all Thermo Scientific Barnstead B-Pure*, E-Pure*…

Filter discs available in plate glass, polyethylene (100 micron) and fritted glass porosities A (145-174 microns), B (70-100 microns), C (25-50 microns), and D (10-20 microns).

Disposable filter funnel for solid-liquid separation can be used in chemistry and biological laboratories. The molded funnel has a 10 micron polyethylene fritted disc. Polypropylene filter funnel is designed for use with the CG-1049-J style glass vacuum adapter and a flask or vial. The CG-1049-J…

…Puri-Fi Pretreatment Particulate Filter is an economical particulate filter designed for water pretreatment. The particulate filter contains wound fiber to remove particulate matter from feedwater supplies. The particulate filter is capable of removal down to 50 micron.   Product Features: …

…Non-cytotoxic Optimal sterile gas exchange through a high airflow rate 0.2 micron filter Additionally standard screw caps (without filter) included in each case Canted neck Graduation on the side Stackable to save culture hood space With red filter screw cap Sterile

…(45-90 microns) or coarse porosity (90-130 microns). Fixed and removable filter plates are 6.4mm (1/4") thick high density polyethylene with a non-porous circumference to better fasten filter paper to the plate. Buchner funnels are also available with a fixed or removable punctured filter…

MicronSep White Packs Available pre-sterilized or autoclavable with gridded surface. Autoclavable filters come in envelopes of 10 filters and 10 absorbent cellulosic pads. The envelopes are designed to withstand normal autoclaving environments and feature an indicator that changes color after…

…used in ductless fume hoods or laminar flow products. Ideal for use as a clean room HEPA filter. Required for laminar flow products. Filter Type: ACFHEPA Application: Containment of particulate only. Filter efficiency 99.997% efficient for removal of particulate at 0.3 microns in size.

Table-top Buchner funnels with medium porosity (45-90 microns) (90-130 microns) removable filter plates are 6.4mm (1/4") thick high density polyethylene with a non-porous circumference to better fasten filter paper to the plate. The high density polyethylene rigid plate is 4.8mm (3/16")…

Table-top Buchner funnels with coarse porosity (90-130 microns) with removable filter plates are 6.4mm (1/4") thick high density polyethylene with a non-porous circumference to better fasten filter paper to the plate. The high density polyethylene rigid plate is 4.8mm (3/16") thick. Holes…

Table-top Buchner funnels with medium porosity (45-90 microns) fixed filter plates are 6.4mm (1/4") thick high density polyethylene with a non-porous circumference to better fasten filter paper to the plate. The high density polyethylene rigid plate is 4.8mm (3/16") thick. Holes are 4.8mm…

…Buchner funnels with coarse porosity (90-130 microns) with a removable punctured filter plate. The high density polyethylene rigid plate is 4.8mm (3/16") thick. Holes are 4.8mm (3/16") diameter on 11mm (7/16") centers. A removable filter plate allows easier cleaning and precious…

Thermo Scientific Nalgene sterile syringe filters are ideal for sterilizing (0.2 micron) or clarifying biological solutions, such as cell culture and microbial media, reagents and additives, proteinaceous solutions, and buffers. PES (polyethersulfone) – Lowest protein binding and…

Filtration without material transfer Ideal for filtration involving recovery of solids High-density polyethylene coarse porosity disc (90-130 micron) and body Use directly or precoat for fine filtration Large filter has a serrated tubing connector

…MCE filters are used to enumetate yeast and bacteria in carbonated beverages, wines, and water and provides a contrast between colonies and filter without the need for counterstaining. Green MCE filters offer a pale green background for viewing black, white, and colorless particles on one filter.…

…the filtration area of a 47mm diameter filter (9.6cm 2 ). Membranes are sterilized by ethylene oxide (EtO) gas and are available individually wrapped or in 10-pack envelopes. Membrane specifications and lot number are printed on clear cover of each filter. Advantec's continuous pleated band…

This 0.5 mL centrifugal filter enables the concentration of biomolecules with a membrane NMWL of 10 kDa. Micron centrifugal filters are ideal for DNA & protein concentration & desalting. Key applications include, protein extraction and purification. The filter has a low binding regenerated…

Components: CAPS(500 mM ), Sodium Hydroxide(For pH Adjustment), Water(rest) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 0.22-micron filter. pH: 10.0 ± 0.15 Storage: 2-8°C

Components: CAPS(200 mM), Sodium Hydroxide(For pH Adjustment), Water(rest) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 0.22-micron filter. pH: 10.0 ± 0.15 Storage: 2-8°C

Components: AMP(200 mM), Water(rest) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 0.22-micron filter. pH: 10.0 ± 0.15 Storage: 2-8°C

Sterile Tris-buffered Saline (TBS) prepared with 18.2 megOhm water, 0.2 micron sterile filtered and steam sterilized in final packaging.

…pre-filtering the sample to remove particulate contaminants and highly adsorptive compounds. It is 20mm long, has a 2.1mm inside diameter (ID), and filters 10-micron particles. The modular system provides tool-free cartridge replacement. The kit comes with one guard column holder and two cartridges.

…particulate matter from the mobile phase. PerkinElmer offers several types of solvent filters to accomplish this task. Spargers, which connect directly to the solvent input lines, are available in both 10 and 40 micron pore sizes and in either stainless steel or titanium. The 40-micronsizes are…

Sterile liquid electrophoresis buffer concentrate prepared with 18.2 megOhm water, 0.2 micron sterile filtered and steam sterilized in final packaging. TAE buffer is used in agarose gel electrophoresis and Polyacrylamide gels both as a buffer and a component of a gel. Can be used for both genomic…