1.5ml Tubes

Compare Tool

Select up to 3 products

1.5ml Tubes
1 - 32 of 175
Sort
View
Show
  • Axygen® 1.5mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…

  • For 48 x 0.5ml or 1.5ml tubes Recyclable polypropylene / autoclavable These racks are designed for 0.5ml and 1.5ml tubes. They hold 48 tubes in 4 rows of 12. Holes are alpha-numerically indexed and on an incline for visibility of all four rows.

  • Max. Force (RCF): 18,000 Brittleness Temp.: 0°C Max. Temp.: 135°C Material: PP Max. Volume: 1.75mL Note: Polypropylene is not recommended for use with Phenol Chloroform. Low temperature storage, multiple spin cycles or organic solvents can affect maximum…

  • 1.5mL Easy-Click Graduated Microcentrifuge tubes feature a small, easy-to-open cap. Graduated every 100µL for easy volume identification Small cap allows tubes to be spaced closely together in racks and storage boxes Frosted Cap and writing panel allows for an extra writing room and…

  • SuperClear® Polypropylene snap cap microcentrifuge tubes with extra-large top, writing spot, and graduations. Spins to 20,000 RCF. Autoclavable. (122°C) With flat easy open attached extra large snap caps, side graduations, and frosted writing surface ATP, RNase/DNase and Endotoxin…

  • …this tube easy to open and reduces the potential for repetitive strain injury. The cap also includes a special 90° hinge that self-aligns the cap and makes it easier to close while one-handed pipetting. Available in 1.5mL sizes that fit all standard and high capacity rotors. Tubes have flat,…

  • These polypropylene (PP) microcentrifuge tubes without cap are resistant to most chemical reagents and can be autoclaved at 130°C. The tubes are offered in 1.5mL and 2mL sizes.

  • Posi-Click™ Small Cap Microcentrifuge Tubes

    labForce (a Thomas Scientific Brand)

    tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits standard centrifuge rotors, racks, and storage boxes Graduated every 100µL for easy volume identification Small cap allows tubes to be…

  • Posi-Click™ 1.7 mL Large Cap Microcentrifuge Tubes

    labForce (a Thomas Scientific Brand)

    …Microcentrifuge tubes feature a large easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Frosted Large Cap and writing panel allows for an extra writing room and is resistant to smearing. Boilproof available Fits all standard 1.5mL

  • Microcentrifuge Tubes

    Celltreat Scientific

    …Centrifuge tubes have a maximum (RCF) of 16,000g and are packaged in easy opening plastic bags. Conical bottom available in three sizes: 0.5, 1.5 and 2.0mL Self-standing available in 2.0mL Also available in a 1.5mL opaque black tube to protect light sensitive compounds All tubes

  • For 48 x 0.5ml or 1.5ml tubes Recyclable polypropylene / autoclavable These racks are designed for 0.5ml and 1.5ml tubes. They hold 48 tubes in 4 rows of 12. Holes are alpha-numerically indexed and on an incline for visibility of all four rows.

  • Posi-Click™ Low-Binding Microcentrifuge Tubes

    labForce (a Thomas Scientific Brand)

    Low-Binding Posi-Click™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Proprietary low-binding or low retention resin maximizes sample recovery Boilproof Fits all standard 0.5,…

  • 1.5ml Microtube, 1000/Bag, 10 Bags/Case.

  • 1.5mL SuperSlik® Polypropylene Microcentrifuge Tubes with Low Protein Binding surface for use with viscous samples. Designed to improve yields. Include flat caps and writing surface. In resealable bags. With flat snap caps, side graduations, and frosted writing surface Ultra low fluid…

  • …pestles are excellent for re-suspending bacterial cells, precipitates of nucleic acids or proteins and pellets of other materials. Supplied with 1.5mL microcentrifuge tubes of the same shape for optimal grinding Length: 8.5cm (3½") Pestles also available without tubes

  • Posi-Click™ Microcentrifuge Tubes Without Caps

    labForce (a Thomas Scientific Brand)

    Posi-Click™ capless tubes are ideal for customers not needing to seal their samples.  With no cap to interfere, collecting from spin columns is easy and mess-free with no caps to break off during centrifugation. Graduated every 100µL for easy volume identification Ultra-clear…

  • Holder Tube 1.5mL

    Techne (Cole-Parmer)

    Tube holder for 1.5ml tubes for SSM5 and SSL5 Microtiter Plate Shakers and SI505 Microtiter Plate Shaker Incubator. Holds 1.5ml tubes (50 each)

  • PBS, 1X Solution, 1.5mL Pre-Filled Tubes

    RPI (Research Products International)

    …it is isotonic and non-toxic to most cells. Uses include substance dilution and cell container rinsing. Ready to use sterile 1X solution, supplied in sterile pre-filled screw cap tubes. Each tube contains 1.5ml PBS 1X solution, packaged in a sealed white cardboard freezer box with divider.

  • LabForce Screw Cap Microtubes

    labForce (a Thomas Scientific Brand

    tubes has an option for any customer need or preference.  The ultraclear, ultra-pure polypropylene plastic resin allows for easy sample visualization.  With an easy 3/4 turn to open and close caps, our tubes/caps are comfortable to work with. Available in 3 volumes: 0.5mL, 1.5mL,

  • 1.5ml Conical Screwcap Tube Only

    Stockwell Scientific

    1.5ml Conical Screwcap Tube Only, 500/Bag

  • LabForce Screw Caps for Microtubes

    labForce (a Thomas Scientific Brand

    …RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free Available in packs of 500 tubes or caps/unit, 10 units/case labForce Screw Cap Microcentrifuge Tubes are made in the USA to rigorous quality standards and provide an excellent alternative to other tubes available on the market.

  • Biotix microcentrifuge tubes are manufactured with medical grade virgin polypropylene for superior clarity. These snapcap tubes are leak resistant, boil proof, and able to withstand 20000 RCF. Try our Microcentrifuge tubes: Sizes include 0.65mL, 1.5mL, and 2.0mL Graduation marks for…

  • Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 96 each 1.5 ml microcentrifuge tubes, 10.5 mm in diameter

  • Benchmark's 5mL centrifuge tube takes the conveniences of standard 1.5ml tubes and scales them up for larger volumes. These polypropylene tubes come with an attached cap that provides a tight, leak-proof seal. They can also be effortlessly opened (or closed) with one hand. The cap is designed to…

  • Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 18 each 1.5 ml microcentrifuge tubes, 10.5 mm in diameter Overall…

  • BioRocker™ FX Tube Rockers

    labForce (a Thomas Scientific Brand)

    …for tube sizes 1.5ml to 50ml Optimized speed and tilt angle for thorough mixing in sample tubes Cold room and incubator safe No adapters or mounting hardware required The BioRocker is designed to provide the ideal speed and tilt angle (24 rpm / 30°) for agitation of sample tubes.

  • Locking Centrifuge Tubes

    Globe Scientific

    Available in 0.5mL, 1.5mL, 2.0mL & 5mL Diamond Midi™ Locking Centrifuge Tube Locking Centrifuge Tubes are engineered with a secure locking system that provides the security of a screw cap microtube with the simplicity of a snap cap tube. Features: Secure –…

  • …Packed 500 in a bag and 10 bags in a pack. All style of tubes and caps are autoclavable. Tubes can be centrifuged to 20,000 RCF. Available in 0.5mL, 1.5mL, and 2.0ml sizes in both conical and freestanding versions. 2.0ml and 1.5ml Tubes have a side writing surface and graduations on some versions.…

  • Axygen® screw cap tubes feature a cap that provides a tight secure seal. Self standing screw top microcentrifuge tube with "O" ring cap Made of polypropylene Volume: 1.5mL Cap color: Red Pre-sterilized

  • Axygen® 1.5mL Self Standing, Screw Cap Tubes feature screw caps that provide a tight secure seal. Will withstand up to 20,000 RCF Screw cap contains O-rings to assure efficient sealing and avoid evaporation Certified RNase-/DNase-free Nonpyrogenic

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.