1.5 Ml Microcentrifuge Tubes

Compare Tool

Select up to 3 products

1.5 Ml Microcentrifuge Tubes
1 - 32 of 118
Sort
View
Show


  • 1.5mL Easy-Click Graduated Microcentrifuge tubes feature a small, easy-to-open cap. Graduated every 100µL for easy volume identification Small cap allows tubes to be spaced closely together in racks and storage boxes Frosted Cap and writing panel allows for an extra writing room and…

  • …with full tube and sample Ideal for refrigerated or frozen storage samples All tubes can be decanted simultaneously Low profile: Will not tip over easily Lightweight: Weighs less than two ounces Holds and locks 50 culture tubes securely Holds and locks 30 microcentrifuge and micro…

  • Posi-Click™ Microcentrifuge Tubes Without Caps

    labForce® (a Thomas Scientific Brand)

    Posi-Click™ capless tubes are ideal for customers not needing to seal their samples.  With no cap to interfere, collecting from spin columns is easy and mess-free with no caps to break off during centrifugation. Graduated every 100µL for easy volume identification Ultra-clear…

  • …Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 1.5 mL tubes are graduated at 0.1, 0.5, 1.0 and 1.5 mL. 2.0 mL are graduated at 0.1, 0.5, 1.0 and 1.5 mL.

  • Posi-Click™ 1.7 mL Large Cap Microcentrifuge Tubes

    labForce® (a Thomas Scientific Brand)

    Microcentrifuge tubes feature a large easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Frosted Large Cap and writing panel allows for an extra writing room and is resistant to smearing. Boilproof available Fits all standard 1.5mL

  • Microcentrifuge Tubes

    Celltreat Scientific

    …Centrifuge tubes have a maximum (RCF) of 16,000g and are packaged in easy opening plastic bags. Conical bottom available in three sizes: 0.5, 1.5 and 2.0mL Self-standing available in 2.0mL Also available in a 1.5mL opaque black tube to protect light sensitive compounds All tubes

  • 1.5 and 2.0 ml microcentrifuge tubes, graduated, with frosted window and flat, safe-lock cap These microcentrifuge tubes are moulded from virgin polypropylene. Their safe-lock mechanism guarantees closed tubes even during boiling or autoclaving. The innovative cap design includes an additional…

  • Microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 0.6 mL tubes are graduated at 0.2, 0.4 and 0.6 mL. 2.0 mL are graduated at 0.1, 0.5, 1.0 and 1.5 mL. Assorted…

  • DNase/RNase-Free Tubes

    Zymo Research Corporation

    DNase/RNase-free 1.5 ml microcentrifuge tubes made of durable polypropylene construction.

  • … The 300D is supplied with s 24 place angle easy access rotor that can accommodate tube sizes of 1.5ml and 2.0ml microcentrifuge tubes. Additional adapters are available for 0.5ml, 0.4ml, and 0.2ml tubes. The rotor is equipped with a cover that easily "snaps" on and off. The 300D is…

  • Globe Scientific is pleased to expand on this line of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements.…

  • …target in the center. The 1.5 mL and 2.0 mL tubes have an additional textured writing surface on the side of the tube. G-Tubes are made of a tough, transparent and specially formulated polypropylene for better sample viewing and overall strength. These tubes are designed with thicker walls…

  • 5 mL Microcentrifuge Tubes

    Argos Technologies

    … 5mL  CapSafe™ Tubes For the highest level of sample security Our new 5mL tubes are a perfect companion to our existing 5mL tubes. Created for samples too small for 15mL tubes, yet too large for standard 1.5mL MCT's. Our new CapSafe™ tube features a specially designed…

  • …centrifugation Unique ClickLok™ sealing mechanism Made of highest purity polypropylene Made of polypropylene These 0.6 ml and 1.5 ml graduated rugged tubes are made of laboratory grade polypropylene suitable to withstand the stress of high speed centrifugation up to 20,000g. The…

  • …this tube easy to open and reduces the potential for repetitive strain injury. The cap also includes a special 90° hinge that self-aligns the cap and makes it easier to close while one-handed pipetting. Available in 1.5mL sizes that fit all standard and high capacity rotors. Tubes have flat,…

  • Tested to 20,000 RCF Graduated at 0.1, 0.5, 1.0 and 1.5 mL Leakproof lid is easily pierced Frosted writing surface for easy identification Capacity 1.5 mL

  • Premium quality, 1.5 mL tubes Leak tested to 20,000 RCF Attached lid Uniform lid membrane thickness Frosted writing area Attached lids provide a tight leakproof seal, can be easily opened and allow trouble-free piercing. Tubes are leak tested to 20,000 RCF for 20 minutes at…

  • tubes transition to light blue and become slightly opaque. At 0°C ViewPoint™ tubes reach their full progressive transition to dark blue, are completely opaque, and provide protection from Ultraviolet (UV) light ViewPoint™ tubes are offered in 1.5 mL, 15 mL, and 50 mL size tubes in…

  • BRAND microcentrifuge tubes fit most common rotors and may be spun up to 30,000 RCF (g) (10,000 x g for 0.5mL; 20,000 x g for 1.5mL; 30,000 x g for 1.5mL and 2.0mL with lid closure at 20°C for 20 min). Manufactured from virgin polypropylene, these highly translucent tubes are free from flash,…

  • microcentrifuge tubes For tubes up to 1.5 mL; maximum cut diameter: 9.4 mm (0.370") Retrieve radioactive pellets from the tips of tubes easily without resuspension or the risk of splashed radioactive substances. Can be used with polyethlyene, polypropylene or polyallomer tubes.

  • Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 18 each 1.5 ml microcentrifuge tubes, 10.5 mm in diameter Overall…

  • LabForce Screw Cap Microtubes

    labForce® (a Thomas Scientific Brand)

    labForce Screw Cap Microcentrifuge tubes are an ideal solution for customers looking for a secure environment for their precious samples and reagents.  Available in a variety of configurations, sizes, and colors the labForce line of screw cap microcentrifuge tubes has an option for any customer…

  • Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 96 each 1.5 ml microcentrifuge tubes, 10.5 mm in diameter

  • Locking Centrifuge Tubes

    Globe Scientific

    …1.5mL, 2.0mL & 5mL Diamond Midi™ Locking Centrifuge Tube Locking Centrifuge Tubes are engineered with a secure locking system that provides the security of a screw cap microtube with the simplicity of a snap cap tube. Features: Secure – Maintains sample integrity…

  • Microcentrifuge Tube Racks are available in five models with 6 to 96 wells. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. These racks will hold 1.5 ml and 2.0 ml snap cap Microcentrifuge tubes. They will also accommodate the popular 0.5 ml to 2.0 ml

  • …barrel into the tube to retrieve samples Available non-sterile or sterile and are RNase, DNase and pyrogen free Spin up to 25,000 x g with proper support in appropriate rotor 5mL Snap Cap Macrocentrifuge Tubes Provide convenience of 1.5mL microcentrifuge in a tube that holds…

  • Polypropylene (PP) Reversible 96-well rack in an 8 x 12 format One side holds 1.5 mL, 1.8 mL, or 2.0 mL microcentrifuge tubes; the other side holds 0.5 mL tubes Alpha-numerically labeled, stackable, autoclavable

  • Microcentrifuge Tubes include caps with ethylene propylene O-Rings and are ideal for any sample processing application. Excellent for frozen storage or when working with hazardous or valuable materials. Packed 500 in a bag and 10 bags in a pack. All style of tubes and caps are autoclavable. Tubes

  • …opening. Marked graduations and frosted labeling panels on tube and cap for easy writing and identification. These Simport centrifuge tubes withstand centrifugal forces of up to 20,000g for the 1.5 ml tube and 5,000g for the 5 ml size. Will withstand extreme temperatures from -90 °C up to…

  • …the tube from opening accidentally (e.g., during heating) Tubes can be autoclaved when open (121 °C, 20 min) Can be easily and single-handedly opened Frosted labeling surfaces Excellent mechanical stability during centrifugation: up to 30,000 x g for 0.5 ml and 1.5 ml tubes; up to…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.