0.5 Ml Pcr Tubes

Compare Tool

Select up to 3 products

0.5 Ml Pcr Tubes
1 - 32 of 63
Sort
View
Show
  • … 0.2 or 0.5 mL capacities Molded from 100% virgin polypropylene, PCR tubes feature thin walls for optimal heat transfer and caps that seal securely to minimize evaporation. Extensive quality inspections to ensure consistent performance. PurePak™ packaging keeps tubes contamination…

  • PCR Tubes

    Eppendorf

    Eppendorf PCR Tubes Manufactured from polypropylene Reduced risk of contamination Available in 0.2 and 0.5 mL sizes 2-part polycarbonate rack consists of work tray and frame for 96 x 0.2 mL PCR tubes All tubes can be directly transferred to the Thermoblock Autoclavable at…

  • Dome cap or flat cap RNase/DNase and Pyrogen Free Not autoclavable These clear reaction tubes have uniformly thin walls (0.0085 inch) to enhance thermal transfer and reduce cycling times. Despite minimal wall thickness, they tolerate boiling, freezing and cycling. Flat top cap is…

  • … 0.2 or 0.5 mL capacities Polypropylene Molded from 100% virgin polypropylene, PCR tubes feature thin walls for optimal heat transfer and caps that seal securely to minimize evaporation. Extensive quality inspections to ensure consistent performance. PurePak™ 4 mL thick puncture…

  • …transfer. Available in both 8 tube strips and individual 0.2 mL and 0.5 mL tubes to cover all applications.  Extensive quality inspections to ensure consistent performance. PurePak™ 4 mL thick puncture proof packaging keeps tubes contamination free. Tubes are certified free of DNase,…

  • 0.2 and 0.5 mL volumes Dome or flat caps Manufactured from the finest grade of virgin polypropylene, these tubes feature dimensional uniformity throughout the critical sidewall and conical bottom. This ensures even contact with the thermal cycler temperature block which delivers…

  • Posi-Click™ 0.6 mL Microcentrifuge Tubes

    labForce (a Thomas Scientific Brand)

    tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 0.5mL centrifuge rotors, racks, and storage boxes Graduated every 100µL for easy volume identification Small cap allows tubes

  • …reagents above EasyStarts’s wax layer to begin PCR. Every EasyStart tube has a precisely formulated lower-layer-reagent-mix to ensure batch consistency and reproducibility. EasyStart is available in 0.2 and 0.5 mL tubes and strips and available for 20, 50 and 100 µL reactions.

  • Thin-wall design maximizes PCR accuracy and reduce cycle times by providing uniform, rapid thermal transfer. All tubes fit most 0.2 ml and 0.5 ml thermal cycler blocks. All PCR tubes are certified RNase/DNase-Free, Human DNA/PCR Inhibitor-Free, and non-pyrogenic.

  • Locking Centrifuge Tubes

    Globe Scientific

    …1.5mL, 2.0mL & 5mL Diamond Midi™ Locking Centrifuge Tube Locking Centrifuge Tubes are engineered with a secure locking system that provides the security of a screw cap microtube with the simplicity of a snap cap tube. Features: Secure – Maintains sample integrity…

  • Thin-wall design maximizes PCR accuracy and reduce cycle times by providing uniform, rapid thermal transfer. All tubes fit most 0.2 ml and 0.5 ml thermal cycler blocks. All PCR tubes are certified RNase/DNase-Free, Human DNA/PCR Inhibitor-Free, and non-pyrogenic.

  • …PCR-TagTrax™ offers an innovative and helpful approach to identifying, tracking and storing 0.2 ml high-profile PCR tubes, high-profile 8-tube PCR strips, as well as 96-well high-profile PCR plates (non-skirted). Able to withstand a wide range of temperatures, from -196ºC to +150ºC,…

  • …a dramatic change to a contrasting color at 7ºC. Tube and plate capacity: qPCR: 64 x 0.1 mL Corbett Rotor-Gene tubes, 16 x 0.2 mL tubes or strips, and 4 x 0.5 mL tubes. PCR: 96 x 0.1 and 0.2 mL tubes and strip tubes; plates up to 96-well. Dimensions: 141 × 99 ×…

  • … 0.2 or 0.5 mL tubes Alphanumeric grid Specifically designed for PCR research, this 96-well rack holds either 96 0.2 mL PCR tubes or 96 0.5 mL style microcentrifuge or PCR tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes. Both sides…

  • …flat cap Attached cap allows opening and closing with one hand Etched writing surface for sample identification Graduated in 0.1 mL increments Ultrathin wall See-thru polypropylene Round bottom makes tube easy to empty Tubes are certified RNase, DNase, Pyrogen and DNA-free.

  • …pre-dispensed into either 0.2 ml or 0.5 ml PCR tubes. The 0.2 ml tubes are also supplied in a 96-well (8 x 12) plate format that allows individual strips of eight tubes to be easily removed. This flexibility allows use of either the entire 96-well plate, strips of eight, or individual 0.2 ml tubes.

  • …sample blocks which can run three different PCR reactions in parallel. The instrument is available with different sample blocks: 3 x 48 well for 0.2 ml tubes, 3 x 30 well for 0.5 ml tubes or 3 x combi block for 48 well 0.2 ml tubes or 18* x 0.5 ml tubes each. Thus, the Biometra TRIO offers high…

  • …(122°C) and freezable (-80°C). Made of polypropylene. 96-well rack separates from PCR workstation. Holds PCR plates, PCR tubes, PCR strips on removable rack and 0.5, 1.5, 2.0 mL microtubes Perfect for PCR or other prep Made of polypropylene Autoclavable Freezable to -80C …

  • …5 ml of the diluted Washing buffer are needed for one reaction. Stable at 2 to 8 °C for 1 month. Solution 11: Anti-DIG HRP, bottle 11 stock solution Reconstitute the lyophilizate in 240 μl autoclaved double-distilled water. This results in an antibody conjugate concentration of 0.5

  • …with all SSI screw microtubes with 0.5, 1.5 and 2.0 ml nominal volumes, in conical and free-standing (skirted) base designs In conjunction with SSI microtubes, all caps can be centrifuged to over 20,000 in a rotor with appropriate support. Tubes and caps can be autoclaved and are suitable…

  • …thoroughly. Approx. 2.5 ml of the diluted Washing buffer are needed for one reaction. Solution 6: Anti-DIG peroxidase, stock solution Reconstitute the lyophilizate in 240 μl autoclaved double-dist. water. This results in an antibody conjugate concentration of 0.5 U/ml. Solution 10: Positive…

  • 0.5 mL Frosted Flat Cap surface for sample inscription Tubes fabricated from virgin polypropylene Highly polished inner surface allows for maximum sample recovery Tubes are autoclavable at 121°C, 15 PSI for 15 minutes -- Remove Tubes from autoclave immediately Secure lid closure with…

  • …x g (4,400 rpm) Low-noise centrifugation without rotor lid  Centrifugation of 1.5 mL and 2 mL Eppendorf Tubes® Adapter for: 0.2 mL PCR tubes, 0.4 mL centrifuge tubes, 0.5 mL micro test tubes and 0.6 mL Microtainer® tubes Rotor and adapter are autoclavable (121°C, 20 min)

  • …labeling surfaces Excellent mechanical stability during centrifugation: up to 30,000 x g for 0.5 ml and 1.5 ml tubes; up to 25,000 x g for 2.0 ml tubes; 70,000 x g possible in form-fitting rotor Graduation scale Available in Eppendorf Quality, Eppendorf Biopur and PCR clean purity levels

  • …lids Designed to hold 0.2 mL 8-strip PCR tubes as well as 0.5, 1.5 or 2.5 mL reagent vials on one side, this reversible rack is for any researcher using strip tubes for PCR. When using only 0.5 mL tubes, flip the rack over for 96 alphanumeric labeled 0.5 mL wells for easy sample manipulation.…

  • …Twisty Tube racks made of Polypropylene (PP) make dilution and concentration study easier as it can transfer samples between 0.2ml PCR tubes to 0.5, 1.5 and 2.0ml tubes. Can be rotated and customized according to end-user application. These racks have tapered wells that securely suspend tubes and…

  • PCR Tubes, PCR Strips or divisible plates, the Mastercycler nexus X2 will give you consistent and publishable results — every day! Product features Large block for large assays — small block for small assays. Universal block for strips, 0.2 mL and 0.5 mL PCR tubes

  • Tube® 5.0 mL System. Eppendorf Tubes are the benchmark for simple and safe sample preparation from 0.5 to 2.0 mL. For larger volumes, 15 mL and 50 mL conical tubes are commonly used. With medium sample volumes you may face an issue: they need to be processed with large conical screw cap tubes -…

  • Mastercycler nexus

    Eppendorf

    …also to your precious lab space. Due to the flexlid concept, the cycler can deal with all types of PCR consumables, from low volume all the way up to 0.5 mL PCR tubes. Of course, all common PCR plates fit – and if your throughput becomes even higher, you can just connect one or two…

  • tubes. The 24 place rotor can be used for all 1.5 to 2.0 mL tubes, including mini-preps. A new 18-place dual-row rotor accepts 2.0 mL and 0.5 mL tubes, eliminating the need for inserting or removing adapters. Special high-capacity rotors support 0.5 mL microtubes, 0.2 mL PCR tubes and…

  • …micro-volume tubes. The 24 place rotor can be used for all 1.5 to 2.0 mL tubes, including mini-preps. An 18-place dual-row rotor accepts 2.0 mL and 0.5 mL tubes, eliminating the inserting and removing of adapters. Special high-capacity rotors support 0.5 mL microtubes, 0.2 mL PCR tubes and…

  • …16 PCR or 0.2 to 0.5 ml tubes Supplied with handles This smaller model of the UniRackTM can hold up to 25 polystyrene or polyprolylene 10 and 12 mm tubes, such as 10 x 75 mm or 12 x 75 mm sizes. This rack will accommodate all types of screw cap microtubes from 0.5 to 2 ml made…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.