0.5 Ml Microcentrifuge Tube

Compare Tool

Select up to 3 products

0.5 Ml Microcentrifuge Tube
1 - 32 of 89
Sort
View
Show
  • 24-M & 24-MR High Speed Microcentrifuges

    labForce (a Thomas Scientific Brand)

    …Series of microcentrifuges include a variety of features based on over 20 years of experience in microcentrifuge design. With state-of-the-art electronics, a large full color display and an advanced lid-locking system, the 24-M Series provides a reliable and feature-rich microcentrifuge, ideal for…

  • Adapter for 0.5 ml microcentrifuge tubes and 0.6 ml Microtainers®, for FA-45-24…

    Eppendorf

    For use with FA-45-24-11 fixed-angle rotor. Accessory for Eppendorf personal microcentrifuges MiniSpin and MiniSpin Plus Adapter for 0.5mL microcentrifuge tubes and 0.6mL microtainers

  • Graduated Microcentrifuge Tubes

    Thomas®

    …Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 1.5 mL tubes are graduated at 0.1, 0.5, 1.0 and 1.5 mL. 2.0 mL are graduated at 0.1, 0.5, 1.0 and 1.5 mL.

  • Microcentrifuge Tubes

    Celltreat Scientific

    …Centrifuge tubes have a maximum (RCF) of 16,000g and are packaged in easy opening plastic bags. Conical bottom available in three sizes: 0.5, 1.5 and 2.0mL Self-standing available in 2.0mL Also available in a 1.5mL opaque black tube to protect light sensitive compounds All tubes

  • Graduated Microcentrifuge Tubes

    Microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 0.6 mL tubes are graduated at 0.2, 0.4 and 0.6 mL. 2.0 mL are graduated at 0.1, 0.5, 1.0 and 1.5 mL. Assorted…

  • Beckman® Type Microcentrifuge Tubes

    Globe Scientific

    These 500uL (0.5mL) Beckman® Type microcentrifuge tubes with attached cap are non-graduated. The tubes are made from polyethylene and are not autoclavable. The tubes are sold in bags of 1000.

  • ChillBlock™ Microcentrifuge Tube Racks

    Simport

    Microcentrifuge Tube Racks are available in five models with 6 to 96 wells. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. These racks will hold 1.5 ml and 2.0 ml snap cap Microcentrifuge tubes. They will also accommodate the popular 0.5 ml to 2.0 ml

  • Rack Microcentrifuge Tube 0.5mL 96 Pos

    Labconco

    …anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 96 each 0.5 ml microcentrifuge tubes, 7.5 mm in diameter Overall dimensions…

  • Microcentrifuge Tubes in Self-Standing Bags

    Globe Scientific

    Globe Scientific is pleased to expand on this line of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements.…

  • Rack Microcentrifuge Tube 0.5mL 18 Pos

    Labconco

    …anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 18 each 0.5 ml microcentrifuge tubes, 7.5 mm in diameter Overall dimensions…

  • 96-Well Reversible Microcentrifuge Tube Racks

    Evergreen Scientific

    Polypropylene (PP) Reversible 96-well rack in an 8 x 12 format One side holds 1.5 mL, 1.8 mL, or 2.0 mL microcentrifuge tubes; the other side holds 0.5 mL tubes Alpha-numerically labeled, stackable, autoclavable

  • Microcentrifuge Tube Storage Box

    Simport

    Made of high impact polystyrene This microcentrifuge tube storage box with a polyurethane foam insert is ideal for holding up to 64 tubes from 0.5 ml to 2 ml. It should be used within a temperature range of -90 °C to 80 °C. A transparent cover allows you to see the contents of the box, and…

  • Safe-Lock Microcentrifuge Tube

    Eppendorf

    …heating) Tubes can be autoclaved when open (121 °C, 20 min) Can be easily and single-handedly opened Frosted labeling surfaces Excellent mechanical stability during centrifugation: up to 30,000 x g for 0.5 ml and 1.5 ml tubes; up to 25,000 x g for 2.0 ml tubes; 70,000 x g possible…

  • IsoFreeze Microcentrifuge Tube Racks

    …enables you to see how cold your samples are at a glance. IsoFreeze® color change racks undergo a dramatic change to a contrasting color at 7ºC. Dimensions: 146 × 105 × 70 mm. Tube capacity: 24 x 0.5, 1.5, 2.0 mL snap or screw-cap style tubes. Rack comes with lid.

  • 5mL Snaplock Microcentrifuge Tubes

    Axygen®

    Axygen 5 mL Snaplock microcentrifuge tubes fit in standard 15 mL centrifuge rotors and offer the ultimate experience in lower volume sample requirements. Smaller volume tubes minimize contamination issues – pipet tips can easily reach into the tube for sample accessibility. Expect the…

  • High-Speed Microcentrifuge Tubes

    Dynalon

    Tested to 20,000 RCF Graduated at 0.1, 0.5, 1.0 and 1.5 mL Leakproof lid is easily pierced Frosted writing surface for easy identification Capacity 1.5 mL

  • 5mL Snap Cap Diamond Midi™ Centrifuge Tube

    Globe Scientific

    …Centrifuge Tubes Provide convenience of 1.5mL microcentrifuge in a tube that holds larger volumes Attached snap cap facilitates one handed opening and closing Pierceable cap allows easy access by needle or syringe Dual graduation scales in increments of 0.5mL and 0.2mL enable…

  • SureSeal S™ Microcentrifuge Tubes

    MTC Bio

    …SureSeal S™ microcentrifuge tubes are designed for a broad range of research applications, including enzyme digests, DNA isolation/purification, centrifugation, incubation and general sample/reagent storage. With a variety of design advances, SureSeal Tubes improve sample visualization,…

  • BRAND Microcentrifuge Tubes

    BrandTech®

    BRAND microcentrifuge tubes fit most common rotors and may be spun up to 30,000 RCF (g) (10,000 x g for 0.5mL; 20,000 x g for 1.5mL; 30,000 x g for 1.5mL and 2.0mL with lid closure at 20°C for 20 min). Manufactured from virgin polypropylene, these highly translucent tubes are free from flash,…

  • Screw-Cap Microcentrifuge Tubes

    Bio Plas

    Tube is made of inert virgin-polypropylene copolymer, to minimize the risk of altering samples Universal use - Accommodates all fixed angle head microcentrifuges (0.5ml and 2.0ml upright models require adapter Cat. No. 4212). Will withstand maximum G-forces of all current microcentrifuge

  • Diamond Midi™ Centrifuge Tubes

    Globe Scientific

    …the tube to retrieve samples Available non-sterile or sterile and are RNase, DNase and pyrogen free Spin up to 25,000 x g with proper support in appropriate rotor Diamond Midi™ Centrifuge Tubes Single turn threaded caps seal easily and securely Graduated in 0.5mL

  • MyFuge™ 5 Microcentrifuge

    Benchmark

    …centrifuge tubes (snap cap) directly. While 5ml blood and culture tubes (12x75mm) and cryovials are also accepted with the included adapters. The microtube positions are designed to accept 0.5 and 0.2ml tubes with the use of optional adapters. For quick spin-downs of 5ml centrifuge tubes

  • Locking Centrifuge Tubes

    Globe Scientific

    …1.5mL, 2.0mL & 5mL Diamond Midi™ Locking Centrifuge Tube Locking Centrifuge Tubes are engineered with a secure locking system that provides the security of a screw cap microtube with the simplicity of a snap cap tube. Features: Secure – Maintains sample integrity…

  • SuperClear™ Screw Cap Microcentrifuge Tubes

    Labcon

    Ultra clear resin 0.5, 1.5, 2.0mL sizes Resealable bags Low profile caps with universal threads SuperClear™ Screw Cap Microcentrifuge Tubes are made from an ultra clear resin that gives you an excellent view of tube contents. These tubes include universal screw threads that…

  • Reversible Racks for Microtubes

    Globe Scientific

    …freezer storage 80/60 well rack capacities: 80-place for 1.5mL and 2mL tubes 60-place for 0.5mL and 0.2 mL tubes 96 well rack capacities: 96-place for 1.5mL and 2.0mL tubes 96-place for 0.5 mL and 0.2 mL tubes 96 well racks have translucent cover to allow viewing of samples while…

  • ChillBlock™ Profile Fit Microcentrifuge Tube Racks

    Simport

    …ChillBlock™ Profile Fit Microcentrifuge Tube Racks are available with either 15 & 30 wells holding 1.5 ml snap cap Microcentrifuge tubes. S700-14 is a 30-well rack and will hold 0.5 ml tubes. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. Each cavity…

  • 64 Well Microcentrifuge Rack, Flourescent Yellow

    Bio Plas

    …$60.93 The 64 Well “Reversible” Micro Tube Rack is designed so that one side of the rack accommodates 0.5 mLmicrocentrifuge tubes. The reverse side holds 1.5 mL to 2.0 mLmicrocentrifuge tubes and screw cap microcentrifuge tubes. Clear polypropylene cover easily snaps on to…

  • Denville 300D Digital Microcentrifuge w/24 tube angle rotor, 13,300 rpm max.

    Denville

    … The 300D is supplied with s 24 place angle easy access rotor that can accommodate tube sizes of 1.5ml and 2.0ml microcentrifuge tubes. Additional adapters are available for 0.5ml, 0.4ml, and 0.2ml tubes. The rotor is equipped with a cover that easily "snaps" on and off. The 300D is…

  • 0.2, 0.5, and 1.5 mL Tubes

    Heathrow

    …uniform heat. Polypropylene tubes are EtO sterilized. Microcentrifuge 0.5 mL Tubes have a frosted writing area and reliable snap cap. Made of autoclavable polypropylene, these graduated tubes can withstand temperatures up to 121°C. Microcentrifuge 1.5 mL Tubes feature frosted writing…

  • Premium Microcentrifuge Tubes, 2.0ml, Dimensions: 39 x 10mm, Natural, Qty.: 1000

    Denville

    … These premium quality tubes were first introduced in 1989 and their innovative features have made them popular in labs around the world. They have external graduation lines and two etched marking surfaces (on the flat cap and the side of the tube). The 1.7ml and 0.5ml sizes do not have injection…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.