0.01 Edta

Compare Tool

Select up to 3 products

0.01 Edta
1 - 32 of 52
Sort
View
Show
  • EDTA Titrant, 0.01 M

    Ricca Chemical

  • EDTA TITRANT, 0.01M (0.02N)

    Labchem

  • EDTA Titrant, 0.01M 1L

    Hach

  • EDTA, 0.005M (0.01N)

    Labchem

  • EDTA Titrant, 0.01M

    Thomas®

    Manufactured with a focus on quality, starting materials are usually ACS grade or higher and all reagents have Certificate of Analysis available. Reagents are manufactured under ISO 9001 quality standards and feature induction sealed caps to ensure product integrity and decrease the possibility of…

  • EDTA Titrant, 0.0100 Molar (M/100)

    Ricca Chemical

    0.01M Solution (APHA), 1 mL = 1 mg CaCO3 Formula: C10H14N2Na2O8•2H2O Formula Weight: 372.24

  • Fluka Ethylenediaminetetraacetic acid disodium salt solution volumetric, 0.01 M…

    Honeywell

    Chemical name: Ethylenediaminetetraacetic acid disodium salt solution Chemical synonyms: (Ethylenedinitrilo)tetraacetic acid disodium salt; EDTA disodium salt; EDTA-Na2 Product Brand: Analytical Density (g/cm3): 1 Molecular weight: 336.21 Molecular formula: C10H14N2Na2O8 UN Number:

  • Tris-Borate-EDTA Buffer

    MP Biomedicals

    TBE buffer is a solution of 1M Tris, 0.9M boric acid and 0.01M EDTA disodium salt, prepared from MP's Ultra Pure products. TBE running buffer is the most commonly used buffer for DNA and RNA polyacrylamide gel electrophoresis. TBE is used with non-denaturing or denaturing (7 M urea) gels.…

  • Lysozyme from chicken egg white lyophilized powder, protein =90 %, =40,000 units…

    MilliporeSigma

    …cells may be hydrolyzed in the presence of EDTA that chelates metal ions in the outer bacterial membrane. The enzyme is active over a broad pH range (6.0 to 9.0). At pH 6.2, maximal activity is observed over a wider range of ionic strengths (0.02 to 0.100 M) than at pH 9.2 (0.01 to 0.06 M).

  • Lysozyme Type VI from Chicken Eggwhite

    MP Biomedicals

    …hydrolyzed in the presence of EDTA that chelates metal ions in the outer bacterial membrane. The enzyme is active over a broad pH range (6.0 to 9.0). At pH 6.2, maximal activity is observed over a wider range of ionic strengths (0.02 to 0.100 M) than at pH 9.2 (0.01 to 0.06 M). One unit will…

  • EDTA Titrant, 0.0100 Molar

    Thomas®

    0.01M Solution (APHA), 1 mL = 1 mg CaCO3 Formula : C10H14N2Na2O8•2H2O Formula Weight : 372.24 EDTA titrant for determining water hardness Molarity is 0.0100 (M/100) Formula weight is 372.24 Comes in a bottle…

  • EDTA Titrant, 0.01M, Standardized

    Reagents®

    Concentration: 0.01M Composition: Water 99.63%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.37% Boiling Point: 100°C Density: 1 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 24 Months Storage:…

  • EDTA Titrant, 0.01M, Standardized

    Reagents®

    …Point: 100°C Color: Colorless liquid Composition: Water 99.62%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.37%, Magnesium Chloride Hexahydrate 0.01% Concentration: 0.01M DOT: NOT REGULATED. Density: 1.02 Melting Point: 0.0°C Physical State: Liquid Shelf Life:…

  • Fluka Ethylenediaminetetraacetic acid copper(II) disodium salt solution…

    Honeywell

    Chemical name: Ethylenediaminetetraacetic acid copper(II) disodium salt solution Chemical synonyms: Copper EDTA solution Product Brand: Analytical UN Number:

  • MOPS-EDTA 10X solution

    bioWORLD

    …For RNA applications A buffer for RNA electrophoresis in denaturing (formaldehyde) agarose gels Contains: 0.4M MOPS, 0.1M Sodium Acetate, 0.01M EDTA Biotechnology Grade RNase activity: None Detected DNase activity: None Detected Appearance: Liquid PH Value: 6.8-7.2

  • SIGMA Tris-Borate-EDTA buffer, 5x Concentrate

    MilliporeSigma

    …Performance Certified Trizma base (Product Code T6066) and Molecular Biology Reagents boric acid (Product Code B6768) and EDTA disodium salt (Product Code E5134). Other Notes: 0.445 M Tris borate, pH approx. 8.3, containing 0.01 M EDTA. Packaging: Supplied in dispenser with a spigot.

  • TE Buffer [10X]

    G-Biosciences

    … 1M Tris-HCl, 0.1M EDTA, pH 8.0 [10X]: 0.1M Tris-HCl, 0.01M EDTA, pH 8.0 [1X]: 0.01M Tris-HCl, 0.001M EDTA, pH 8.0 Chemical Information: Chemical CASNo. Synonym Tris 77-86-1 tris(hydroxymethyl)aminomethane EDTA 6381-92-6 ethylenediaminetetraacetic…

  • 10X TBE Buffer

    Omega Bio-tek

    …and as an electrophoresis running buffer for the separation of double-stranded DNA in agarose and polyacrylamide gels. 10x TBE Buffer is composed of 0.9 M Tris-Borate, 0.01 M EDTA, pH 8.3. For agarose gel electrophoresis, 10x TBE Buffer should be diluted to a working concentration of 1x or 0.5x TBE.

  • SIGMA Tris Acetate-EDTA buffer, 10x concentrate, BioReagent, for molecular…

    MilliporeSigma

    …with Biotechnology Performance Certified Trizma base (T6066) and Molecular Biology Reagent EDTA disodium salt (E5134). Solutions also contain acetic acid (A6283); powdered blend contains Trizma acetate (T1258). Other Notes: 0.4 M Tris acetate, pH approx. 8.3, containing 0.01 M EDTA.

  • EDTA, 0.1428M Crtg

    Hach

    EDTA Cartridges for Digital Titrator For the determination of Total Hardness 0.1428 M Digits x 0.1785 = mg/L CaCO3 in 100 mL, Digits x 0.01 = Gdh

  • EDTA, disodium salt, dihydrate

    bioWORLD

    …dihydrate Biotechnology Grade (also available in Pretoemics Grade) Insolubles: <0.005% Heavy metals (as Pb): <0.005% Iron: <0.01% Nitrilotriacetic acid: <0.1% RNAse/DNAse activity: None detected Appearance: Powder Boiling Point: 614.2°C at 760…

  • Lipoprotein, low density from human plasma, >=95% (SDS-PAGE), solution

    MilliporeSigma

    …and dexamethasome have shown to be involved with the regulation of LDL receptor mediated uptake. Physical form: Solution in 150 mM NaCl and 0.01% EDTA, pH 7.4 Physical properties: Low density lipoproteins are smaller than VLDL and IDL (26 nm) (MW approximately 3.5 million) and more dense…

  • ROCHE Glycerol-3-Phosphate Dehydrogenase (GDH), from rabbit muscle

    MilliporeSigma

    …life science research only. Not for use in diagnostic procedures. Quality: Contaminants: <0.001% aldolase and GAP-DH, each, <0.01% LDH and TIM, each Preparation Note: Activator: EDTA Specificity: Heat inactivation: GDH is rapidly inactivated at temperatures > 65 °C.

  • Resolvin D2 ELISA Kit

    Cayman Chemical

    …in Cayman’s ELISA Buffer (Item No. 400060) diluted to 1X (0.1 M potassium phosphate containing 0.1% BSA, 400 mM sodium chloride, 1 mM EDTA, and 0.01% sodium azide), human plasma, and human serum. The assay has a range from 1.6-1,000 pg/ml and a sensitivity (80% B/B0) of approximately 10 pg/ml.

  • Resolvin D1 ELISA Kit

    Cayman Chemical

    …Cayman’s ELISA Buffer (Item No. 400060) diluted to 1X (0.1 M potassium phosphate containing 0.1% BSA, 0.1% sodium chloride, 1 mM EDTA, and 0.01% sodium azide) and DMEM containing phenol red and 10% FBS. This assay has a range from 3.3-2,000 pg/ml and a sensitivity (80% B/B0) of approximately…

  • Anti-Rabbit IgG (whole molecule)-R-Phycoerythrin antibody produced in goat,…

    MilliporeSigma

    …below.Immunofluorescence (1 paper)Western Blotting (1 paper) Immunogen: Purified rabbit IgG Physical form: Solution in 0.01 M phosphate buffered saline, pH 7.4, containing 0.1 mM EDTA, 1 mM iodoacetamide, 1% bovine serum albumin and 15 mM sodium azide Other Notes: Antibody adsorbed with…

  • Anti-Human IgG (gamma-chain specific), F(ab')2 fragment-R-Phycoerythrin antibody…

    MilliporeSigma

    …suitable for use in flow cytometry . The antibody can also be used for direct immunofluorescence (1:32). Immunogen: Purified human IgG Physical form: Solution in 0.01 M phosphate buffered saline, pH 7.4, containing 0.1 mM EDTA, 1 mM iodoacetamide, 1% bovine serum albumin and 15 mM sodium azide

  • Anti-Rabbit IgG (whole molecule), F(ab')2 fragment-R-Phycoerythrin antibody…

    MilliporeSigma

    …fragment-R-Phycoerythrin antibody is suitable for use in flow cytometry and immunofluorescence. Immunogen: Purified Rabbit IgG Physical form: Solution in 0.01 M phosphate buffered saline, pH 7.4, containing 0.1 mM EDTA, 1 mM iodoacetamide, 1% bovine serum albumin and 15 mM sodium azide.

  • Anti-Mouse IgG (whole molecule)-R-Phycoerythrin antibody produced in goat,…

    MilliporeSigma

    …antibody can also be used for indirect immunofluorescence (1:20). Immunogen: Purified mouse IgG Physical form: Solution in 0.01 M phosphate buffered saline, pH 7.4, containing 0.1 mM EDTA, 1 mM iodoacetamide, 1% bovine serum albumin and 15 mM sodium azide. Specificity: Binds all mouse Igs.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.