High precision, universal fit for use with pipettes from other manufacturers Soft, flexible tip cone ensures better pipette tip sealing Fine graduations make it easy to visually check volume Ergonomically optimized cone geometry ensures perfect fit on Eppendorf pipettes New tip…

The ultimate protection of pipette and sample against unintentional and unnoticed contamination by aerosols, drops and splashes ep Dualfilter T.I.P.S. filter tips are filter tips with a two-phase filter for contamination protection. The two filter layers made of flexible, hydrophobic…

Ensure a better seal with the pipetter module, for higher accuracy and precision. The Thermo Scientific™ Finntip™ Flex™ Pipette Tips reduce the amount of force needed to attach and eject tips, significantly lowering the risk of repetitive stress injury (RSI). Excellent for…

The Finntip Flex system provides users with soft, flexible high-end tips. The Flex system consists of tips, an easy-to-use operation rack and a space-saving refill rack. The soft tip reduces the amount of force needed to attach and eject tips, significantly lower the risk of RSI. It also ensures a…

Tips with ART® self-sealing barrier Clear Pre-sterilized 20 µL, 200 µL or 1000 µL liquid volumes Bi-fabricated wall of ART Ergonomic Tip creates a strong, effective seal while requiring significantly lower tip insertion and tip ejection force. Certified…

Tips deliver highly accurate samples, seal well on the pipettor, and are easy to seat and eject.

Protects against carryover contamination Extended tip length Aerosol Resistant Tips Four sizes Line of Reach ART (Aerosol Resistant Tips) pipettor tips provides an extra level of contamination control. ART tips have a self-sealing barrier that seals when exposed to aerosol and…

Eliminate cell fragmentation caused by mechanical shearing with Thermo Scientific™ Finntip™ Wide Orifice Pipette Tips, ideal for pipetting macromolecules. Two different models cover volume range of 10-1000μL Wide orifice tip; inside diameter of orifice is 1.1mm/1.8mm …

Ensure a better seal with the pipetter module, for higher accuracy and precision. The Thermo Scientific™ Finntip™ Flex™ Pipette Tips reduce the amount of force needed to attach and eject tips, significantly lowering the risk of repetitive stress injury (RSI). Excellent for…

Protection of pipette and sample Prevents aerosol contamination Vacuum-sealed tip racks for maximum sterility Inert and non-sealing tip filters Sterile Finntip Filters are ideal for PCR and other amplification methods, or for any work where aerosol contamination might occur.…

Material: Polypropylene Volume Range: 1-200 µl Grad Lines: 5 µl Orifice Outside Diameter: 0.57 mm

Non-sterile 8 x 12 microplate format Fully autoclavable Refill system features tip trays that are easily transferred from tower or twin-packs. Refill system range covers the most popular sizes. Rigid and strong polypropylene boxes and trays are fully autoclavable. Flip-top boxes…

MBP’s Qiagen tips offer liquid sensing technology that works with old and new Qiagen software. Line of clear tip versions is also available. Both tip styles are available in sterile, non-sterile and ART barrier formats.

Labcon Eclipse™ Pre-siliconized pipet tips for use with viscous samples. These tips offer very low surface tension. Every lot is lab tested and certified free of detectable Nuclease (Rnase/Dnase), Endotoxin (pyrogen) contamination and certified to U.S.P. results. Resins are pre-tested for…

Advanced molding process prevents flash around tip and a perfectly centered opening Smooth uniform surface Convenient packaging Color-coded Fully autoclavable Optimal design with a smooth, clear, hydrophobic surface ensures complete sample dispensing and minimal liquid…

Axygen® Gel Loading Tips are designed to fit a wide variety of single and multi-channel pipettors, compatible with most popular brand of pipettors. These polypropylene tips are nonpyrogenic and RNase-/DNase-free. Available in either flat and round versions, with different outer diameters for…

The Finntip Flex system provides users with soft, flexible high-end tips. The Flex system consists of tips, an easy-to-use operation rack and a space-saving refill rack. The soft tip reduces the amount of force needed to attach and eject tips, significantly lowering the risk of RSI. It also ensures…

Protect pipettes and the samples from contamination with Thermo Scientific™ Finntip™ Filtered Pipette Tips. These sterile, disposable pipette tips keep pipettes clean, and are perfect for PCR amplification applications and for pipetting radioactive, infectious, and aerosol-emitting…

The Eppendorf Maxitip are tailored to different vessels. Select the right Eppendorf Maxitip which meets your needs. The Eppendorf Maxitip P is designed for aspirating 1 mL to 10 mL, for example from beakers. The Eppendorf Maxitip S for 2.5 mL to 10 mL forms a system with the Maxitip and is used for…

Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…

Tips ensure 100% protection against aerosol and liquid contamination. The SoftFit* tip design and sturdy rack are ideal for multichannel pipettors. Tips also fit most 200µL single-channel pipettors. The ART barrier traps contaminants, keeping them out of pipettors and samples. This also…

Enhance the performance of your Perkin-Elmer CCS workstation with BioRobotix tips. One group is designed for the PlateTrak, MiniTrak and Evolution P-3, these tips offer precision dispensing for multi-dispensing assays. Tips are available in 20, 50 and 235 µL volumes and in sterile,…

Adjustable Volume One-handed dispensing Easy-to-set volume Simple to fill and prime Repeatedly dispenses reagents quickly, easily and accurately using positive displacement suitable for tedious routine pipetting procedures. Liquids only contact the disposable tip, eliminating contamination…

Finntip Flex filter tips combine the ergonomics of a standard Finntip Flex pipette tip with the safety of a filter tip. Finntip Flex Filter tips are free from DNA, DNase and RNase, making them essential where cross contamination is a major concern and ideal for use in research applications. …

For both fixed- and variable-volume models Precision injection molding care for air-tight fit Made from high grade, virgin polypropylene Free from trace metals for excellent accuracy and reproducibility

Precise sample delivery Sterilized Racked Low retention ART (Aerosol Resistant Tips) tips are designed for applications requiring high accuracy and reproducibility. ART tips have a self-sealing barrier that seals when exposed to aerosol and liquid contaminants, trapping them inside…

BioRobotix pipet tips help you get more out of your Tecan workstation. 20 µL and 50 µL liquid-sensing and clean Tecan tips increase the precision of low volume pipetting by minimizing dead air volume within the tip. All Tecan tips come in a hermetically sealed blister pack. These…

Reduces sample retention Sterile or non-sterile HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don't use additives or coatings that may affect sample integrity. Low retention tips are for applications requiring high accuracy and reproducibility.…

Natural polypropylene Autoclavable Accurate and reproducible Standard tips are made of premium-grade virgin polypropylene. Tips are available in single trays, bulk packages or space-saving refill system. All are autoclavable at 121°C for 20 min. Electron beam pre-sterilized tips…

Multistepper Pipettes Eight channel repeating dispensers Delivery volumes of 50, 100, 150, 200 and 250 µL Convenient volume chart on the module Safety label and convenient shelf hanger and stand Designed especially for work with microplates. Helps speed up routine…

Tips for Finnpipette Digital Single Channel Pipets.

Advanced mold designs ensure a secure and airtight fit Dye and metal-free 100% premium grade virgin polypropylene Fine point design provides superior accuracy in drawing and dispensing samples. Bulk packaging is high quality and economical. Sturdy autoclavable rack can be used with…