Significantly reduce evaporation and contamination by using a Thermo Scientific™ Nalgene™ Rectangular Polypropylene Tank with Cover, offered in sizes ranging from 8 to 114L. Tanks can be modified with a factory-installed spigot. Features: Suitable for use with many…

Rectangular, Linear low-density polyethylene (LLDPE) with cover Similar to 9075D10 series, but rectangular With friction-fit covers Resin complies with FDA Regulation 177.1520 for food use Nalge recommends using FRP casing or exterior support with all rectangular tanks used…

Low-density polyethylene, safety dispensing Nalge 2340 series Central wide neck, 2 1/2” i.d., has size 83B polypropylene screw cap Easy handling with handle at top and bottom and offset pouring spout with captive plug Leakproof 10 L jugs are 15 1/4” high, 9 3/4” o.d.; 20 L…

Linear low-density polyethylene (LLDPE) (9075D10 - D60) Not autoclavable Rigid, seamless Flanged rim has upturned edge. Tank includes friction-fit cover. It is resistant to most acids, alcohols, aldehydes, bases, esters, ketones and aliphatic and aromatic hydrocarbons; not…

Resist stress cracking and increase tolerance to many organic chemicals with the Thermo Scientific™ Nalgene™ Cylindrical Polypropylene Tank with Cover, an economic alternative to stainless-steel tanks. Autoclavable cylindrical tanks are available in sizes ranging from 19L to 378L…

Useful with most acids, alkalies and aggressive organic solvents Fluorination enhances long-term container performance and prevents permeation loss Split and puncture resistant; Tefzel spigot and fluorinated polypropylene screw closure Stainless steel carrying strap

Excellent for autoclaving batches of culture media, distilled water and solutions Nalge 2250 series Graduated to contain in 1-gallon and 5-liter increments Two molded handles and size 83B polypropylene screw cap; also accepts No. 13 1/2 rubber stopper in place of cap Not recommended for use…

For an economical alternative to stainless steel, choose the Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover. Ideal for less rigorous applications, these linear, low-density polyethylene tanks offer excellent resistance to stress cracking. The cover…

Nalge 2234 series Lower-density bottles have molded handles and polypropylene screw cap Size 100 Walls are rigid and opaque Leakproof Neck i.d. 3 1/2 inches Graduated to contain in 1-gallon and 5-liter increments Dimensions: 10 liter carboys measure 13 3/4” high x 9 7/8” o.d.;…

Easy filling, traps fumes in Screw on funnel top with 12cm (4.75") dia Screw-top to seal container for safe transit Ideal for safe handling and temporary storage of soent solvents and other liquid wastes Snap-on cap - seals funnel top to retain fumes High-density polyethylene …

Nalge 2212 With polypropylene screw closure 3 1/2” neck opening Sturdy handle is attached to molded-in shoulder loops Leakproof Autoclavable Ideal for storing solutions, media, and sterile water. Useful for handling large volumes of powders and other solid samples. Calibrated in liters…

Store and transport solids, powders and liquids using Thermo Scientific™ Nalgene™ Wide Mouth Polypropylene Carboys with Handles. These durable natural polypropylene (PP) carboys feature a convenient wide-mouth opening to promote ease of cleaning and dispensing. The wide-shoulder…

Ensure more complete drainage with the low outlet of Thermo Scientific™ Nalgene™ Autoclavable Polypropylene Carboys with Bottom Tubulation, excellent for distilled water and culture media. Features: Bottom tubulation molded in one piece with bottle Molded-in handles…

Autoclavable, polypropylene, heavy-duty construction Stylish, octagonal square shape Choice of three sizes A new range of high performance, large bottles and carboys come in a choice of 5, 10 or 20 liters. The stylish, square octagonal shape provides for increased rigidity when…

Nalge 2221 series Rigid bottles for smooth pouring Large molded handle accommodates gloved hand Excellent chemical resistance Autoclavable and leakproof Dimensions: 1 gallon jugs measure 11 3/4” high and take size 38-430 caps. 2 gallon jugs measure 15” high and take size 53B caps.…

Thermo Scientific™ Nalgene Heavy Duty Vacuum Carboys are useful as a vacuum trap, and will hold full vacuum up to 8 hours. Constructed of thick walled natural polypropylene PP) provides added strength. Supplied with white 83B PP closure with TPE (thermoplastic elastomer) gasket. …

Polyethylene Easy-grip handle and screw cap Leakproof shipping and storage

Ideal for storing solids or powders Nalge 2241 High-density, translucent polyethylene 6 gallon capacity Molded-in handle and recessed bottom allow easier filling and emptying without spills Rugged, heavy-duty design with wide stance and low center of gravity assures stability Closure is 120…

Suitable for corrosive liquids Nalge 2220 series Low-density polyethylene jugs have polypropylene screw caps Neck is offset for easy and accurate pouring Large, molded handle accommodates gloved hand Leakproof Closure size for 1732M10 jug is 38-430 mm; dimensions are 11 3/4” high,…

Store reagents with the Thermo Scientific™ Nalgene™ Jerrican with Tethered Polypropylene Closure, featuring a space-saving design, molded-in handle and recessed grip at the bottom to provide better control when pouring. The double-ported 2243-9013 is ideal as a reservoir in automated systems. The…

Thermo Scientific™ Nalgene Heavy Duty Vacuum Carboys are useful as a vacuum trap, and will hold full vacuum up to 8 hours. Constructed of thick walled natural polypropylene PP) provides added strength. Supplied with white 83B PP closure with TPE (thermoplastic elastomer) gasket. …

Useful with most acids, alkalies and aggressive organic solvents Nalge 2097 series HDPE with polypropylene screw closure Heavy duty walls Leakproof Safe, durable, cost-efficient, high-density polyethylene narrow mouth bottles are suitable for shipping Fluorocarbon surface, a Teflon ® -like…

Lightweight and chemically resistant Nalge 2240 series HDPE For storing, carrying, and dispensing liquids, handle and pouring spouts are integrally molded onto stable, rectangular container Spout sealed by captive leakproof polypropylene screw cap, size 53B Molded…

Resistant to strong acids, alcohols and bases Nalge 2505 Autoclavable Polypropylene screw cap without liner Contact-clear bottles are graduated at 90 mL and 99 mL , accurate to 4 mL . Polypropylene copolymer, polypropylene screw closure. Temperature range -40 to 121°C…

Light blue polycarbonate Silicone lined polypropylene closure Sterile, ready-to-use and provide safe storage from -100°C to 100°C Leak proof with molded-in graduations in mL Space-saving square shape Meet USP 87, 88 and are tested for pyrogenicity

Store, mix and dispense reagents in Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks, designed for use as closed containment systems. Offered in sizes ranging from 75 to 380L , tanks featurea a 150mm neck opening fitted with a gasketed closure for secure sealing. …

Usable at subfreezing temperatures and in cold rooms Nalge 2251 series Glass-like clarity, with size 83B polypropylene screw cap Autoclavable and leakproof Recommended only for use with water and non-hazardous aqueous solutions; also usable with dilute acids and some alcohols; not usable with…

Ideal for any application where sanitary fluid handling is required Clear polycarbonate Autoclavable at 121°C Lot traceable/lot controlled Polycarbonate carboys are clear, tough and can be used from -100 to +121°C. Lighter and safer than glass, these carboys can hold 20…

Resistant to bases, weak acids and aqueous solutions for microbiological analysis Nalge 2500 With graduations at 90 mL for 1:10 dilutions and 99 mL for 1:100 dilutions; graduations accurate to 1 mL Bottle is transparent polysulfone for break resistance; leakproof screw cap is polypropylene,…

Durable and specifically designed for hard use Nalge 2242 HDPE Improved permeation barrier Lower extractables Useful with acids, alkalies and aggressive organic solvents Economical Similar to Nalge 2240 except fluorocarbon surfaces provide improved barrier…

Perform aseptic fluid transfer or sampling in biopharmaceutical applications with Thermo Scientific™ Nalgene™ Polypropylene Sanitary Carboys with 3" Sanitary Neck Design. The carboy's welded sanitary neck is easy to clean with no screw threads. Versatile with…

Nalge 2213 series Usable in cold rooms and at sub-freezing temperatures Similar to1734Q20 series, but of polycarbonate, with stainless steel carrying handle Graduated Due to the limited chemical resistance of polycarbonate, autoclavable bottles are recommended only for use with…