Banded polypropylene housing ensures lab safety preventing the housing from bursting Color-coded housing allows for easy identification of membrane Most 30mm filters have a 1 micron glass pre-filter For sample volumes of 2mL to 100mL Retention volume < 115µL Maximum…

Vials feature an 8mm crimp top finish Manufactured from clear, Type 1 Class A or amber, Type 1 Class B borosilicate glass Compatible with 8mm aluminum crimp seals and 8mm snap caps

Solid top caps are phenolic with PTFE/rubber liners and 24-400 finish. Chemically resistant to moisture vapor and offer an inert surface for vial contents.

Suitable for instruments where vials remain in the sample tray during injection Feature a nominal 5mm diameter opening and 12x32 profile Manufactured from clear, Type 1 Class A or amber, Type 1 Class B borosilicate glass Glass vials feature a graduated, write-on patch for convenient sample identification

Inserts are made from clear glass or untinted plastic; use with amber vials for light sensitive samples. Flanged inserts are designed to be suspended from the rim of StepVials Bottom spring inserts provide a cushion against needle contact to reduce bending Usable and residual volumes are valid…

Recommended by EFA CFR Part 136 and under EPA 40 CFR 141 Manufactured from clear or amber borosilicate glass Vials, caps and septa are available as separate components or as kits

22 mm Septa for VOA Vials PTFE/Silicone Liner

Snap cap closures fit all SUN-SRi 12x32mm snap/crimp vials Eliminate crimping and decrimping of vials with easy to apply snap caps Snap caps are supplied with septa pre-inserted to minimize handling contamination Closures are shipped in sealed polybags to prevent contamination during…

Screw thread headspace vials are convenient and do not require tools Round bottom vials are compatible with most autosamplers Tin-plated metal caps are compatible with magnetic transport autosamplers Multiple turn threading maintains a tight seal through extreme heating cycles

High quality polypropylene open top closures fit all SUN-SRi 13-425 screw thread vials Pre-assembled septa allows for vacuum release where more than half of vial contents will be removed Integral septum caps are an economical choice for HPLC applications Bonded septa caps resist dislodging…

Stainless Steel Angled to allow easy access Luer-Lok connection for easy attachment to syringes Tip sleeve allows secure filter attachment Use 4 3/8” cannula for 900mL vessel volume Use 7 ½” cannula for 500mL vessel volume

Color-coded polypropylene housing ensures easy identification of membrane For sample volumes of <1mL Retention volume < 7.5µL Maximum operating temperature: 100°C autoclave at 125°C for 15 minutes Maximum operating pressure approximately 75 psi

Convenience kits provide an alternative to ordering multiple components Kits include equal quantities of vials and matching closures Reusable two compartment trays protect vials/closures while keeping matching supplies together Clear trays make it easy to keep track of available supplies…

9mm screw thread vials have a standard 12x32 profile compatible with most autosamplers Microsampling vials allow for max sample extraction without separate inserts High recovery vials combine large sample capacities with near full sample extraction Manufactured from clear, Type 1 Class A…

Manufactured of polyethylene with a limited porous area Fits securely on the end of a 1/8” cannula or sample probe

Type 1, Class A borosilicate glass Standard size pipets meet ASTM E 969 tolerance limits Pipets have standard size openings

Inserts are made from clear glass or untinted plastic; use with amber vials for light sensitive samples. Flanged inserts are designed to be suspended from the rim of StepVials Bottom spring inserts provide a cushion against needle contact to reduce bending Usable and residual…

Crimp top headspace vials feature a standard 20mm finish Round bottom vials are compatible with most autosamplers Flat bottom vials are preferred for manual headspace autosamplers Select amber glass vials for light sensitive samples

Convenience kits provide an alternative to ordering multiple components Kits include equal quantities of vials and matching closures Reusable two compartment trays protect vials/closures while keeping matching supplies together Clear trays make it easy to keep track of available supplies without…

Magnesia-loaded silica gel Naturally hydrophilic with broad chemical resistance Exceptional flow rates and high throughput loading Standard 1µm prefilter (30mm) for optimal performance with particulate-laden analytes Certified for chromatographic performance with an HPLC…

Inserts are compatible with StepVial II screw thread vials Made from clear glass or untinted plastic Flanged insert designed to be suspended from the rim of StepVial II Bottom spring inserts provide cushioning against needle contact to reduce bending Usable and residual volumes are valid for…

Banded polypropylene housing ensures lab safety preventing the housing from bursting Color-coded housing allows for easy identification of membrane For sample volumes of <10mL Retention volume < 25µL Maximum operating temperature: 100°C autoclave at 120°C for 15…

Open top racks manufactured from polypropylene Open top available for 8, 12 and 15mm diameter vials Colored vial box racks with lid made from high density polypropylene

Inserts are compatible with StepVial II screw thread vials Made from clear glass or untinted plastic Flanged insert designed to be suspended from the rim of StepVial II Bottom spring inserts provide cushioning against needle contact to reduce bending Usable and residual volumes are valid for…

Banded polypropylene housing ensures lab safety preventing the housing from bursting Color-coded housing allows for easy identification of membrane Most 30mm filters have a 1 micron glass pre-filter For sample volumes of 2mL to 100mL Retention volume < 115µL Maximum…

Natural molded polypropylene closures are a convenient alternative when a resealable closure is not required. The thin membrane allows for easy needle penetration and the purchase and assembly of septa are not required with this easy-to-use one-piece closure.

Compatible with Autosamplers from: Waters, Agilent, Shimadzu, Varian, Perkin Elmer, Beckman, and Leap StepVials have a standard 12x32mm profile and are compatible with convenient 11mm snap cap or aluminum seal closures The “Step” design ensures proper centering of limited…

Pre-assembled kits reduce risk of contamination Clear re-closable tray protects unused vials and allows for more efficient tracking of supplies

High quality polypropylene open top closures fit all SUN-SRi 8-425 screw thread vials Pre-assembled septa reduce risk of contamination during sample prep Closures are shipped in sealed polybags to prevent contamination

Seals can be used for all SUN-Sri 12x32 snap/crimp vials Crimp seal closures block evaporation of volatile compounds Provided with pre-inserted septa Feature a variety of septa to serve a variety of applications Select tin-plate seals for applications requiring magnetic…