Min/Max Thermometer Magnet Used in weather stations, cold storage rooms, construction, industry, or anywhere, indoor and out, requiring a record of minimum and maximum temperatures. Small floats are pushed to each temperature extreme by the two mercury columns and stay there until reset with…

Rugged housing with large LCD displaying the parameter being measured together with time, date and temperature (in ºC or ºF). Automatic or manual temperature compensation Automatic or manual ranging Automatic buffer recognition Digital and analog outputs Min/Max and 99 data points …

Measure damaging UV (ultraviolet) light in the environment and museums UV degradation studies in the pharmaceutical, cosmetic, semiconductor, printing, window tinting, and other industries Laboratory chromatography, electrophoresis and forensics Test UV sterilization and dermatology lamps in…

Large 3 3/16” x 2 1/2” dual display Recall min/max temperature and humidity readings Stand or wall mount Monitor can be used in labs, chemical storage areas, clean rooms, stock rooms, factories or outdoors. Unit can be used to monitor desiccators, incubators, refrigerators…

Resilient silicon rubber Enables filling and dispensing of pipets with one hand, safely through avoidance of hand or mouth contact with liquid. Our Silicone Pipet Fillers offer a softer feel with easier and faster operation of valves. Silicone is also more chemically resistant and more…

One thermometer bulb is kept constantly wet by a siphon reservoir while the other gives a dry temperature reading. Humidity is obtained by comparing the two readings on the enclosed chart. Uses a safe and easy to read red liquid in place of the usual mercury. Dual scales of -10/50°C and …

Monitor RH and Temperature from up to 100’ away Monitor RH and temperature inside an environmental chamber or clean room without opening the door. Place the weatherproof (IPX3) sensor outdoors, in green houses, warehouses, air ducts and other hard to reach places and continuously…

Simultaneously displays internal and external temperature on a 33/16” x 21/2” LCD, large enough to be read across a room. Useful as an indoor/outdoor thermometer, or anywhere simultaneous internal and external readings are required. Can be wall mounted or freestanding with easel back. Recall…

4 CHANNEL THERMOMETER This unique portable thermometer displays data from 4 thermocouple probes simultaneously on a large backlit LCD. Communicates with a computer via the bi-directional RS232 port and optional cable, and graphic software. Auto ranging with auto power off, minmax, hold…

Infrared, RTD and thermocouple capabilities in a single unit With Ultimate Thermometer you’re certain to have a solution for every temperature measurement application you encounter. For general purpose applications use any standard type K, J, R, E, or T thermocouple probe. Need a very…

The Water Quality Bench Top Meter from Sper Scientific measure all of the following parameters: pH ORP (oxygen reduction potential - SOLD SEPARATELY) mV Conductivity TDS (total dissolved solids) Salinity Temperature Rugged housing with large LCD displaying the…

Advanced pH Meter Reads either pH (in 0.01 resolution) or mV in large digits, with time, date, and temperature (in ºC or ºF) shown simultaneously on the lower display. Also indicates stable reading, low battery and displays calibration data. Scroll 99 data points with time stamps and min/max…

Rugged housing with large LCD displaying the parameter being measured together with time, date and temperature (in ºC or ºF). Automatic or manual temperature compensation Automatic or manual ranging Automatic buffer recognition Digital and analog outputs Min/Max and 99 data points …

Highly accurate thermometer (+/-0.3% rdg. +1 C) accepts any type K or J thermocouple probes. Fast response time over a wide temperature range (-200~1370ºC and -28~2498ºF) and high resolution (0.1 C/F). Advanced features include a large 3 /12 digit LCD, hold, auto power off, min/max/avg, and…

The remote ambient temperature / relative humidity sensor is mounted on a cord over 7’ long. Place the highly accurate sensor inside a desiccator, refrigerator, drying or other environmental chamber and view simultaneous displays of temperature and RH outside on the large LCD. Recalls min/max…

20 ~ 100% RH scale on 4" dial. Uses a precise synthetic hair hygrometer with an accuracy of ±5%. Inner dial shows temperature using a bimetal thermometer, with an accuracy of ±2°F. N.I.S.T. traceable certificate of compliance available: 736920C

Wirelessly Display, Log and Download  Bluetooth® Hi / Lo Alarms Ice Point calibration Δ (T1-T2) Min / Max / Ave K, J, E, or T This unique portable thermometer displays data from 4 K, J, E, or T type thermocouple probes simultaneously on a large…

Automatically records up to 16,000 data points in the field. These can later be downloaded to a computer via the meter’s RS232 port and the results viewed instantly on the ThermoLog Software which comes with the unit. Software also enables real time data logging directly from the thermometer to the…

Available in: Immersion & General Purpose: 1225B27, B38, B28, B39 and B29 Penetration: 1225B30-B32 Surface: 1225B35, B33 and B34 Ambient: 1225B36, B40, B37 and B41

Pen size unit handles surface & penetration temperature measurements. One end of the sturdy metal pen contains a non-contact Infrared thermometer for surface temperature measurements. Press the button to scan temperature and release to hold. IR temperature results are displayed within one…

Highly stable and accurate readings with large LCD display Designed for simple one-hand operation Automatically calibrates to pH 4, 7, 10 buffers and can be adjusted to recognize non-standard buffers as well Features hold function and auto power  

Dimensions, L x W x D, inches (mm): 2 x 1.5 x 0.5 (55 x 35 x 15) Weighs only 1 oz. Clips to keychain or belt loop Large buttons and LCD Compact and lightweight stopwatch is loaded with features including an alarm clock with variable 12/24 hour format, calendar, thermometer…

The Water Quality Meter reads PH, mV, conductivity, TDS, D.O. temperature and ORP using interchangeable probes. The user can order probes for only the parameters currently required and add additional probes in the future. Intelligent probes electronically retain calibration information. No…

Measure concentrations in brix, salinity and a wide variety of other parameters in the field with laboratory accuracy. As small, light and simple to use as optical refractometers, but with the precision of a digital readout. Reads samples as small as 1 ml. Sample temperature is initially displayed…

Measures dissolved oxygen to determine water quality in environmental testing, labs, industrial and municipal waste water, aquariums and fish hatcheries Automatic temperature compensation as well as compensation for salinity and altitude (all factors directly effecting DO readings) …

When temperature exceeds your minimum or maximum setting entire display flashes red. Simply hold the IR gun, press the trigger and aim the laser guide at the target. Results immediately appear in ºC or ºF on the backlit LCD and are automatically held for 6 seconds after the trigger…

Housed in a protective rubberized IP65 Waterproof case to safeguard the electronics from wet environments and makes for easy clean ups. Measure samples as small as 1 ml, in the field with laboratory accuracy. Sample temperature is initially displayed on the large LCD followed by the measurement…

ROHS Compliant CE Mark 1-year warranty Everything necessary for immediate field use: pH SD Card logger 850060, sealed epoxy body reference combination electrode with a BNC connector and a 2½' cable, ATC temperature probe, pH buffers 4, 7, 10 and deionized water, batteries and instructions. All…

Combines an anemometer, hygrometer, thermometer, sound and light meter into a single hand-held unit. Also reads any type-K thermocouple probe. Results are displayed on a large dual LCD with low battery and out of range indications. Features touch-tone buttons, min/max, auto power off and hold…

Measures concentrations in Brix, salinity, refractive index and clinical parameters Full scale accuracy of ±0.2% using CCD scanner (= linear scanned array imaging) technology Reads samples as small as 0.4 ml Measurement results, unit of measure and sample temperature are all displayed on the…

The Basic pH Meter has large 7/8" high digits and a lightweight design. Ideal for both field and lab applications. Simple to operate and works with any electrode with a BNC connector. Measures the full 0 – 14 pH range with a high 0.01 pH resolution. Features 2 point calibration, hold function,…

Ultrasonic Cleaners are designed to remove grease, dust or other contaminants from surfaces and cavities of small objects, parts and samples such as cuvettes, lenses, glassware, stainless steel instruments, metals and more. Simply place objects directly into the stainless steel tank or into a…