SP Bel-Art Test Tube Racks
-
Poxygrid® Imhoff Settling Cone Rack
SP Bel-ArtUse a Poxygrid® cone rack to support three Imhoff settling cones in a single row for clearer viewing. Lightweight Poxygrid® racks hold cone tips up off the benchtop for easier viewing and to allow plug removal if required Wire frame racks have a wide base for stability; epoxy…
-
Dry It - No Matter How Much Space You Have Small, compact footprint enables placement where it is needed most Dries labware quickly by providing continous warm air circulation High storage capacity to accommodate up to 76 peg positions for all types of labware Selector knob allows…
-
NMR Sample Tube Rack
SP Bel-ArtPolypropylene rack is steam autoclavable at 121°C (250°F). Dimensions: 21cm x 11cm x 22cm H (8 3/8" x 4 ½" x 8 ¾"). Rugged and stable polypropylene rack is made specifically to support and safely store Nuclear Magnetic Resonance tubes. Upper deck has holes; lower deck has hemispherical wells to…
-
For all of your magnetic separation experiments, these powerful racks sequester magnetic beads so that affinity ligands (antibodies, streptavidin or proprietary reagents for coupling nucleic acids) or rinse solutions can be added or decanted in assays. They offer exceptional quality and value…
-
Scienceware® No-Wire™ Test Tube Half Racks
SP Bel-ArtCompact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods. Available in 5 grid sizes to accommodate the full range of laboratory test tubes Steam autoclavable at 121°C (250°F) Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")
-
Serum Vial Racks
SP Bel-ArtTop shelf height is 41mm (1 5/8"). Chemical resistant and steam autoclavable at 121º C (250º F). Sized for serum vials (10-13mm diameter), RIA vials and T3/T4 reaction vials (13-16 & 16-20mm diameter). Polypropylene racks fit most water baths for elevated temperature incubations End plates…
-
24-Hole Scintillation Vial Rack Takes 24 vials up to 30 mm o.d. Autoclavable; non-scratching Molded cutouts in end panels form handles For start to finish preparation Height to top of upper shelf: 44 mm. Overall dimensions: 298 x 127 x 95 mm high. Height to top of upper shelf is 1-3/4".
-
Slant Racks
SP Bel-ArtThis polypropylene rack has slanted sides to help prepare agar media slants in 13-16 or 16-20mm tubes. Media-filled tubes are autoclaved with the rack in a vertical position; then the rack is positioned to the preferred angle and media allowed to cool and harden. One side is inclined 5° to create a…
-
Scienceware® Standards Bottle Rack
SP Bel-ArtArranges valuable USP™ reference standards Rack fits into Secador® Desiccator for low humidity storage Clear acrylic construction for easy viewing of labels Wipes clean Stores thirty 23mm standards bottles in a compact footprint, 33 x 11 x 2.2 cm high.
-
Dry it - No Matter How Much Space You Have High storage capacity to accommodate up to 114 peg positions for all types of labware Single-sided benchtop models fit against a wall, conserving bench space Double-sided benchtop models provide twice the capacity with a slightly larger…
-
Poxygrid® 100mm Petri Dish Mini Rack
SP Bel-ArtOrganize and Safely Hold Six, 100mm Dishes The epoxy-coated steel wire Petri Dish Mini Rack helps keep benchtops neat and organized. Holds six 100mm Petri dishes with lids Ideal for lab transport and incubation of dishes Epoxy coated steel wire is chemical and corrosion resistant…
-
Scienceware® No-Wire™ Bottle & Vial Racks
SP Bel-ArtSmall enough to hold in one hand and enough choices to accommodate most vials and small bottles. Offered in 5 grid configurations Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70") Polypropylene; autoclavable
-
Scienceware® Floating Cryotube Rack
SP Bel-ArtPolypropylene Autoclavable 20 places Rack accepts 12mm tubes Rack can be used for holding cryotubes during work or incubation. It floats in water and can be used for quickly thawing frozen cells in a water bath. Rack has handle for easy handling. The filled rack unloads easily by…
-
Stainless Steel Pipettor Stand
SP Bel-ArtMade of stainless steel without any plastic coating, this universal rack holds all types of pipettors including the Gilson Pipetman®. Five positions, sloping back and open front notches hold the pipettors Suitable for free standing on a bench top
-
Scienceware® No-Wire™ Test Tube Racks
SP Bel-ArtGreat alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions…
-
Rotary Separatory Funnel Rack
SP Bel-ArtThis rotary separatory funnel rack consists of a rectangular base, screw-in column and a support disc held in place by a screw clamp. Support disc is fully adjustable for different heights up to 21" Open front type support holes for easy removal and placement of separatory funnels …
-
Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic…
-
Scienceware® 3mm NMR Sample Tube Rack
SP Bel-ArtSturdy, stable polypropylene rack is made specifically for organizing and protecting 3mm O.D. thin-walled Nuclear Magnetic Resonance tubes. Holds up to 72 tubes in a 6 x 12 array. Hemispherical wells in the lower deck cradle tubes Sturdy, stable polypropylene construction Handles at…
-
Conical Tube Holder
SP Bel-ArtMove tube and rack with one hand, insert or remove tube from the holder with one hand. Support either a 15 or 50mL conical tube while allowing a view of the tube’s entire contents. Steam autoclavable at 121°C (250°F). Chemical-resistant polypropylene.
-
Made especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes and perfect for use in microbiology and immunology labs. They are molded of buoyant TPX® brand polymethylpentene with tiny bubbles throughout for additional buoyancy. Insert…
-
Scienceware® Round Bottom Flask Support
SP Bel-ArtRound-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder. Can be stacked together for convenient storage Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids Steam autoclavable at…
-
Autoclavable Rows are numbered and lettered Base plate has rounded wells with drain holes. Molded cutouts in end panels form handles. 9259L10 and L20 are 213 x 110 x 111 mm high; 9259L30 through L50 are 213 x 110 x 127 mm high.
-
Save Time and Money. No More Searching, Fumbling or Breakage. Store pipettors while protecting pipettor tips in these epoxy-coated aluminum racks that provide quick, easy access for more efficient work. Holds up to 10 round shape pipettors such as Finnpipette®, Socorex®,…
-
Unique immobilizing tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Raised handle for easy…
-
Switch-Grid™ Test Tube Racks
SP Bel-ArtThis innovative, split-frame rack holds up to two different size tubes in the same rack and allows users to quickly switch grids to hold other sizes as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately. 10mm to 30mm…
-
Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Patent pending. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve…
-
60mm Petri Dish Racks
SP Bel-ArtThis rack is useful for safe transport and incubation of 60mm Petri dishes and helps to streamline benchtop sample processing. Rack base is epoxy coated steel, and all other parts are made of white polypropylene. Racks are shipped flat and easily assemble in minutes. Six columns hold up to…
-
Poxygrid® 60 & 150-Place Test Tube Racks
SP Bel-ArtChemical and corrosion-resistant steel wire test tube rack is coated with heat-cured epoxy for long life and easy cleaning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range: -223°C (-369°F) to 121°C (250°F);…
-
Poxygrid® Labware Drain Stand
SP Bel-ArtDry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all)…