SP Bel-Art

Compare Tool

Select up to 3 products

1 - 32 of 87
Sort
View
Show
  • 50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…

  • Easy tube content ID Autoclavable Angling 50 mL tubes allows easier identification of contents marked on cap. The rack, whether used on a benchtop or in a refrigerator, holds frequently used reagents nearby and on an angle facing the user. Angled rack is also useful for draining excess…

  • Dry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all)…

  • Dry it - No Matter How Much Space You Have High storage capacity to accommodate up to 114 peg positions for all types of labware Single-sided benchtop models fit against a wall, conserving bench space Double-sided benchtop models provide twice the capacity with a slightly larger…

  • Polystyrene construction. Leave both hands free for pipetting and other critical tasks Non-Grip Style safely supports a 50ml conical centrifuge tube and permits the tube to freely be removed Grip Style gently grips the tube and moves with the tube when it is lifted from the bench top

  • Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods. Available in 5 grid sizes to accommodate the full range of laboratory test tubes Steam autoclavable at 121°C (250°F) Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")

  • This rotary separatory funnel rack consists of a rectangular base, screw-in column and a support disc held in place by a screw clamp. Support disc is fully adjustable for different heights up to 21" Open front type support holes for easy removal and placement of separatory funnels …

  • These racks have 12 places (3 x 4 rows) for 300mL Biological Oxygen Demand Bottles. Stackable for storage or refrigeration allowing 16.7cm (6-9/16") between racks Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)

  • Securely holds as many as eight chromatography columns up to 30mm (1-3/16") in diameter in or between its flexible loops. Rigid plastic back is mounted on two polyethylene support blocks which slide over support stand rods Tighten the screws to mount the rack at the desired height …

  • Transparent acrylic stand stores 6 pipettors ready for use Stores many available pipettors Places: 6 Material: acrylic

  • Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic…

  • MCT/PCR Rack

    SP Bel-Art

    Perfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …

  • Slant Racks

    SP Bel-Art

    This polypropylene rack has slanted sides to help prepare agar media slants in 13-16 or 16-20mm tubes. Media-filled tubes are autoclaved with the rack in a vertical position; then the rack is positioned to the preferred angle and media allowed to cool and harden. One side is inclined 5° to create a…

  • Safely transport, incubate and store Petri dishes and contact plates, and helps to streamline benchtop sample processing. Configured in 6 columns with bottom access slots for easy removal of plates Center divider with built-in handle has ample space for labeling Up to four racks can…

  • Match Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …

  • Lower section of these 2-piece racks is a tray for water or crushed ice. Of gray, high-impact styrene. 0210C94 holds 120 tubes under 12 mm diameter and is 16" L x 5-5/8" W x 2-1/4" H; 2591D02 holds 105 tubes under 8 mm diameter and is 8-1/2" L x 4-7/8" W x 2-5/8" H;…

  • For all of your magnetic separation experiments, these powerful racks sequester magnetic beads so that affinity ligands (antibodies, streptavidin or proprietary reagents for coupling nucleic acids) or rinse solutions can be added or decanted in assays. They offer exceptional quality and value…

  • 1.5 to 15 mL tubes Holds six tubes or vials Compact footprint This height-adjustable rack securely holds up to six tubes or vials at any desired depth in a water bath or beaker. Rack features a flexible grip that easily retains mixed test tubes or varying weight and volume…

  • Dry It - No Matter How Much Space You Have Small, compact footprint enables placement where it is needed most Dries labware quickly by providing continous warm air circulation High storage capacity to accommodate up to 76 peg positions for all types of labware Selector knob allows…

  • Turn to the Pipette You Want This unique stand holds up to 94 pipettes and rotates on a central vertical axis for convenient selection. Rotating disks are 18cm (7-1/8") diameter. Instructions for quick assembly included. Lower disc consists of four concentric troughs with tapered…

  • Polypropylene thermometer rack holds up to 25 thermometers in a vertical position Hole diameters in top and middle plates are 7.9 mm ( 5/16") Bottom plate has 3.2 mm ( 1/8”) diameter drain holes. Overall dimensions: 149 x 213 x 251 mm (5 7/8 x 8 3/8 x 9 7/8”)

  • Color Comparison Tests Just Became Easier Colors stand out against the white surfaces of this polypropylene rack making color comparison tests easier to read. Useful for drying or storing test tubes Holds six, 25mm or eight, 18mm tubes; includes six drying pins Steam…

  • This rack is useful for safe transport and incubation of 60mm Petri dishes and helps to streamline benchtop sample processing. Rack base is epoxy coated steel, and all other parts are made of white polypropylene. Racks are shipped flat and easily assemble in minutes. Six columns hold up to…

  • Minimize Pipetting Errors Make precise additions of liquid components to microplate wells by adjusting plates to the most convenient angle. The angular presentation of the plate and clear acrylic platform beneath allows you to easily judge which wells have received liquid addition by…

  • Fabricated of welded steel wire with corrosion-proof epoxy coating, this wall rack holds a single 1000mL (32oz) eye wash bottle in plain view for emergency use. Suitable for use with 8244N34 eye wash bottles (sold separately) Hangs on a screw or nail

  • Steam autoclavable at 121°C (250°F) Dimensions: 128mm x 105mm x 43mm H (5.08" x 4.15" x 1.70") Available in 2 sizes to hold either 0.5 or 1.5ml tubes. Open sides, ideal for use in a tray of crushed ice. Easy to assemble. 1226C36: holds tubes: 0.5 mL micro, places: 63, rows: 7 x…

  • Unique  tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Patent pending. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve…

  • Use to route pump lines, gravity flow lines and airflow lines or computer wires. Non-conductive plastic clips accept 6.5mm (1/4") diameter or smaller tubing and wire. Organize and guide tubing and wires. Pressure sensitive adhesive backing attaches to most surfaces. 6 per pack.

  • Holds 12 pipets Polyethylene construction Pipet support rack supports pipets horizontally without putting pressure on fragile tips.  Rack holds 12 volumetric or graduated pipets from 1 mL . The polyethylene support measures 241 mm L x 178 W x 292 H (9 1/2” x 7” x 11…

  • Sturdy, stable polypropylene rack is made specifically for organizing and protecting 3mm O.D. thin-walled Nuclear Magnetic Resonance tubes. Holds up to 72 tubes in a 6 x 12 array. Hemispherical wells in the lower deck cradle tubes Sturdy, stable polypropylene construction Handles at…

  • This innovative, split-frame rack holds up to two different size tubes in the same rack and allows users to quickly switch grids to hold other sizes as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately. 10mm to 30mm…

  • Autoclavable Rows are numbered and lettered Base plate has rounded wells with drain holes. Molded cutouts in end panels form handles. 9259L10 and L20 are 213 x 110 x 111 mm high; 9259L30 through L50 are 213 x 110 x 127 mm high.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.