Lab Exhaust Snorkels are suitable for the removal of heat or nuisance fumes. Exhaust Snorkels need to be tied into the general exhaust for the lab. Each lab snorkel is furnished with 5.5" mini hood that will accept the optional hoods noted. The two outermost joints can rotate and swivel…

Heavy Duty Steel Tables provide a sturdy and stable platform for your most critical lab work while offering the flexibility to move your process to another area or to another lab. This adjustable height table comes with vibration isolation casters and a phenolic or epoxy work surface. The…

Heavy Duty Steel Tables provide a sturdy and stable platform for your most critical lab work while offering the flexibility to move your process to another area or to another lab. This adjustable height table comes with locking swivel casters and a phenolic or epoxy work surface. The…

This stainless steel work table with bottom shelf is made of seamless 14 gauge type 304 stainless steel. Stationary tables are 34" tall with stationary posts and leveling feet. This table includes a bottom shelf. This stainless steel work table is made of seamless 14 gauge type 304 stainless…

Designed for use at desks that are 32"-36" tall. 20.5"-28" adjustable height, measured from the top of the seat to the floor. Backless Stool. Highly durable molded polyurethane foam cushioning covered with easily cleaned antibacterial/antimicrobial vinyl. Black, non-marring casters suitable for…

Knee Space Panels for Drawer Aprons are to be used with Drawer Aprons. Knee Space Panels for Drawer Aprons are to be used with Apron Rails. The knee space closes off the casework to the wall to create a clear sitting under the work surface.

These electrical raceways are pre-wired single channel aluminum raceways with 120 V, 20 amp GFCI or standard outlets. Includes 8' black power cord with straight blade or twist-to-lock plug.

Notched shelving is 1" thick black phenolic resin with a finished front edge. These shelves are notched to create a pass-thru shelf. They are suited for use with island stanchions. Other sizes and configurations are available upon request.

Polymer Utility Carts will never corrode. Includes impact resistant shelves and are designed to withstand daily abuse. 7/16" shelf's edge retains small spills and prevents items from sliding off during transport. Polymer Utility Carts will never corrode. Includes impact resistant shelves and are…

Heavy Duty Steel Tables provide a sturdy and stable platform for your most critical lab work while offering the flexibility to move your process to another area or to another lab. This adjustable height table comes with leveling glides and an epoxy work surface. The table frame is painted…

This additional shelf is to be used with a Patriot table with uprights. It includes a painted steel shelf with bookend brackets, front and rear lip and all attachment hardware.

Metro totes are to be used with wire super slide.

Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

Heavy Duty Steel Tables provide a sturdy and stable platform for your most critical lab work while offering the flexibility to move your process to another area or to another lab. This fixed height table comes with leveling glides and an epoxy work surface. The table frame is painted…

Designed for use at desks that are 31" tall or under. 19"-24" adjustable height, measured from the top of the seat to the floor. Medium back of 18". Highly durable molded polyurethane foam cushioning covered with easily cleaned antibacterial/antimicrobial vinyl. Black, non-marring casters suitable…

Island cross members are used with island stanchions for stability. They are 2" x 3" and include caps and all installation hardware. They are of a 11 gauge steel construction.

Cold Water Faucets are deck mounted. They are chrome plated brass with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats.

Wall mounted cylinder restraints are cast aluminum. Includes mounting hardware and a nylon strap. The restraints can be placed adjacent to each other to secure a group of cylinders. Free standing cylinder restraints are constructed from 2" x 2" tubular steel. A fully welded design…

Patriot Tables are a value driven, adjustable height, standard duty table suitable for many basic lab applications. They will normally be placed along the perimeter of the lab providing a flexible lab space. Options include leveling glides, or locking swivel casters These patriot tables…

Chemical resistant phenolic or epoxy resin. Front edge is finished and all other edges are square. Work surface curb to be applied to work surface top.

Wall Mount Bracket Countertop Support is used to support spans of work surface without structure mounted on the floor. Adequate in-wall blocking is required. Bracket is 11 gauge with a 2" wide return flange with mounting holes at the top and rear of the bracket.

Rear Wall Cabinet Fillers are used to close the space between the rear of the wall cabinet and wall created by the hanging rail. The filled is only needed when the end of the cabinet is exposed.

Stationary wire epoxy coated shelving is furnished in metroseal 3 epoxy. Corrosion resistant finish for wet or high humidity environments. Each unit includes 4 posts, 4 shelves and split-sleeves to attached shelves to posts. Open wire design minimizes dust accumulation and allows circulation for…

Envision workstations are designed for back to back use for optimal lab layout flexibility. They have a heavy duty powder coated steel construction. Painted Pearl White. The work surface is phenolic and the frame is adjustable from 30"-36". Each table includes three tiers for…

These electrical pedestals come in either single or double gang, double faced.  They are 120 V and 20 amp. Supplied with black standard or GFI outlets and stainless steel cover plates. The Custom Electrical Pedestal is double faced and can accommodate a variety of styles and…

Designed for use at desks that are 31" tall or under. 18"-23" adjustable height, measured from the top of the seat to the floor. Backless stool. Highly durable molded polyurethane foam cushioning covered with easily cleaned antibacterial/antimicrobial vinyl. Black, non-marring casters suitable for…

This pegboard is made of type 304 stainless steel with 1/2" diameter, 6" long white polypropylene pegs. Pegboard is 30" tall and is furnished with a 4" wide stainless steel drip trough and clear plastic drain tube.

Apron Drawer with Drawer are used to span a knee space area between two cabinets. Attachment hardware is included.

This stainless steel work table is made of seamless 14 gauge type 304 stainless steel. Mobile work tables are 34" tall with special posts and 4 poly casters (2 swivel/2 brake).

Mixing Faucets are deck mounted. They are chrome plated brass with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats.

The garment racks are type 304 stainless steel, electro-polished and have open, wire construction to promote laminar air flow. The steel hangers are included and are spaced at 3" intervals. They are easy to install and include a unique hanger capture mechanism that provides theft deterrence.

Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.