The Hamilton plunger assembly is suitable for use with 5000 uL 1005 syringe models of 23 gauge.

Hamilton PRP-3 columns are based off of the PRP-1 with a larger pore size for protein separation. This column resin has no silanol groups, so irreversible protein adsorption is not a concern, giving analytes such as proteins a recovery of > 90%. This stable material also allows the use of…

Volume 50 µL Syringe Type Microliter Syringe Series 700 Termination Removable Needle (RN) Needle Small RN Gauge No Needle Included Point Style No Needle Included Needle Length No Needle Included …

Guard columns can provide many benefits when used upstream from an analytical, preparative, or semi-preparative column. Guard columns are typically chosen to have the same packing as the primary column. Any compounds or particulate material that would block the frits or highly adsorb to the primary…

Point styles 2 and 3 Standard 2” length Needles seat precisely to the zero graduation mark of the syringe. They are autoclavablewhen disassembled. They allow the use of different specification needles with the same barrel. The small ‘s’ next to the gauge number indicates…

This tubing is cut to length but the ends are not polished and the tubing is not passivated like a typical finished needle.

The Hamilton controller is suitable for use with microlab 500 series A instruments.

Polymeric 7.5% cross-linked soft-gel columns for cation, ligand exchange separations of carbohydrates. Compatible with UV and RI detectors Hydrogen form columns for USP L17 applications Calcium form columns for USP L19 applications Lead form columns for USP L34 applications…

The Hamilton replacement tip cone cylinder is suitable for use with 5 - 100 uL SofTouch multi-channel pipette models.

The Kel-F hub is made from CTFE plastic. Needles are available from 31 to 10 gauge. This hub is recommended when connecting to a rigid male Luer like a Luer Tip (LT) syringe because the plastic is more pliable and creates the best seal. All needles are sold in six-packs and the standard needles are…

Hamilton HxSil C8 and C18 columns exhibit greater retention than most columns. This allows the separation of compounds that are not sufficiently retained on other C8 or C18 columns. Protect Your Investment - Hamilton guard columns protect analytical, semi-prep and preparative HPLC columns.…

The Hamilton bead is suitable for use with CR-700 constant rate syringe models.

Hamilton HxSil C8 and C18 columns exhibit greater retention than most columns. This allows the separation of compounds that are not sufficiently retained on other C8 or C18 columns. Protect Your Investment - Hamilton guard columns protect analytical, semi-prep and preparative HPLC columns.…

The PRP-h5 derives its hydrophobic functionality from a pentafluorinated polymer bead, delivering a selectivity difference from standard silica C18 stationary phases. This gives chromatographers the desired retention characteristics necessary for certain sample types. This difference is especially…

Separate compounds through size exclusion.  HC-40 columns separate compounds through size exclusion. The 4% cross-linked HC-40 uses size exclusion as the primary mechanism of separation. The higher carbohydrate oligomers elute first while the smaller di- and monosaccharaides elute later. …

Guard columns can provide many benefits when used upstream from an analytical, preparative, or semi-preparative column. Guard columns are typically chosen to have the same packing as the primary column. Any compounds or particulate material that would block the frits or highly adsorb to the primary…

Hamilton pipette tips are universal-fit. Hamilton SoftGrip™ Manual Pipettes are used with Hamilton AdvanTip Pipette Tips deliver outstanding accuracy and precision, guaranteed.

Removable needles Length: 2.756” Point style: 3 Replacement needles available on special order.

The Hamilton 1700 series 500 uL syringe features PTFE luer lock (TLL) termination. It is suitable for use metal (N) or kel-F needles. This syringe model offers borosilicate glass and PTFE fluid path. It can be used at a pressure rating of up to 200 psig and temperature rating of up to 10 to 115…

A pH electrode with a true flat membrane for surface measurements such as paper, agar plates or even skin. The robust plastic shaft with a ring diaphragm guarantees quick response though enhanced contact between the sample and reference. Benefits Fast response time because of enhanced…

The 800 series syringes are the reinforced plunger version of the original Hamilton 700 Series syringes. Attached to the flange of the syringe is a blue syringe holder. The syringe holder provides a spot to hold the syringe that will not heat up the barrel causing dispense inaccuracies.…

Hamilton Company offers a calibration service for precision syringes and Digital Syringes. A Certificate of Calibration is provided with the product and the procedure is performed with an unbroken chain of calibrations traceable to N.I.S.T. Calibrated precision syringes are available only at…

Metal hub (nickel plated brass) needles can be used with TLL syringes and LT or TLL connectors. Needles are 304 stainless steel (sst.) Standard needle length is 2" / 51 mm Metal hub (N) needles are available in convenient six packs Custom needle lengths and point styles are available

The Metal hub is made from nickel plated brass. Needles are available from 33 to 10 gauge. This hub makes the most rigid connection to the needle making it perfect for repetitive septum piercing. Metal hub needles are compatible with PTFE Luer Lock (TLL) syringes. All needles are sold in six-packs…

Hamilton pipette tips are universal-fit. Hamilton SoftGrip™ Manual Pipettes are used with Hamilton AdvanTip Pipette Tips deliver outstanding accuracy and precision, guaranteed.

The Hamilton 1700 series 50 uL syringe is suitable for use with cemented needles. This syringe model offers SST, borosilicate glass and PTFE fluid path. It can be used at a temperature rating of up to 10 to 50 degree C and pressure rating of up to 1000 psig.

The Hamilton plunger assembly is suitable for use with 50 uL 1705 DAD syringe models.

The Hamilton thumb screw is suitable for use with Microlab 500 system.

The Hamilton plunger assembly is suitable for use with 250 uL TLL-SAL, D-SAL SaltLine syringe models.

The Hamilton disposable tip adapter is made of PTFE material which offers high temperature resistance. It is used to connect a luer tip (LT) or PTFE luer lock (TLL) termination syringe to a 1 uL disposable tip. The adapter connects a Luer Tip (LT) or PTFE Luer Lock (TLL) termination syringe to a…