Hamilton guard columns protect your analytical HPLC column. They remove particulate contaminants and highly adsorptive compounds from samples, prolonging analytical column life. Guard columns are modular and cartridge replacement is easy and tool free. Guard column cartridge holders are available…

Hamilton Company offers a calibration service for precision syringes and Digital Syringes. A Certificate of Calibration is provided with the product and the procedure is performed with an unbroken chain of calibrations traceable to N.I.S.T. Calibrated precision syringes are available only at…

Guard columns can provide many benefits when used upstream from an analytical, preparative, or semi-preparative column. Guard columns are typically chosen to have the same packing as the primary column. Any compounds or particulate material that would block the frits or highly adsorb to the primary…

The Kel-F hub is made from CTFE plastic. Needles are available from 31 to 10 gauge. This hub is recommended when connecting to a rigid male Luer like a Luer Tip (LT) syringe because the plastic is more pliable and creates the best seal. All needles are sold in six-packs and the standard needles are…

1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…

1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1μL up to 500μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…

The Hamilton 16 Inch communication cable helps to connect from a Microlab 500 to a RJ45 pump. From microlab 600 controller to pump

Volume 10 µL Syringe Type Microliter Syringe Series 700 Termination Cemented Needle (N) Needle Cemented Needle Gauge 26s gauge Point Style 3 Needle Length 0.75 inch (19.1 mm) Std. Needle Dead…

The Hamilton 10 cm removable needle of 0.23 mm diameter, is suitable for use with gastight 1700 series syringe models.

Point styles 2 and 3 Standard 2” length Needles seat precisely to the zero graduation mark of the syringe. They are autoclavablewhen disassembled. They allow the use of different specification needles with the same barrel. The small ‘s’ next to the gauge number indicates…

1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…

The Hamilton lens assembly is suitable for use with 1 mL pipette models.

The Hamilton male luer lock adapter connector comes with an inner fitting diameter of 0.059 Inch, is made of CTFE/brass material which provides good temperature and chemical resistance.

PRP-X200 columns can quickly resolve alkali metals, alkaline earth metals, and ammonium. One unique feature of this column is that the resolution between any two ions in the alkali metal series can be increased or decreased by changing the concentration of methanol in the mobile phase; allowing…

These tips are used with Hamilton 1000 μL SoftGrip and SofTouch pipettes. They are provided in different packaging types, surface textures, and filter options.

The Hamilton gel caddy measuring 30 cm x 40 cm is sold as 50 per pack.

Guard columns can provide many benefits when used upstream from an analytical, preparative, or semi-preparative column. Guard columns are typically chosen to have the same packing as the primary column. Any compounds or particulate material that would block the frits or highly adsorb to the primary…

This combination pH electrode is especially made for measurements in very small volumes, such as NMR tubes, where a long thin shaft is needed and by requiring an immersion depth of only 7 mm! Benefits The very long (180 mm) and only 3 mm shaft diameter below make this pH electrode ideal…

Hamilton PRP-3 columns are based off of the PRP-1 with a larger pore size for protein separation. This column resin has no silanol groups, so irreversible protein adsorption is not a concern, giving analytes such as proteins a recovery of > 90%. This stable material also allows the use of…

Hamilton chromatography resins can be ordered in bulk, i.e. not packed into column hardware. This is a low cost approach to application-specific testing and analyses. Bulk resin can also be purchased to pack your own columns. Guard columns can provide many benefits when used upstream from an…

Protect Your Investment - Hamilton guard columns protect analytical, semi-prep and preparative HPLC columns. They also remove particulate contaminants and highly adsorptive compounds from samples, prolonging column life. The designs are modular and cartridge replacement is easy and tool-free. …

The Hamilton opto switch assembly is suitable for use with ML900 valve assembly.

The Hamilton repair kit contains style 2 needle and is suitable for use with 7101 syringe models. Style 2 Needle

Reinforced plungers Removable needles Replaceable barrel and plunger assembly Length: 1.97” Point style: 3 Handle adds balance and “feel” to the syringe. Adjustable friction to control plunger resistance and plunger stop to prevent blowout. …

The Hamilton 100 mm needle is suitable for use with syringe, which is used for laboratory and research use.

The Hamilton spindle/tip assembly is suitable for use with GasTight 1100TLL series syringe models.

Polymeric anion exchange packings for separation of inorganic and organic anions. Easily separate the eight common anions (fluoride through sulfate) Good separation of fluoride from the water dip Use with organic solvent from 0 to 100 % for elution of hydrophobic anions or column…

The Hamilton compression fitting includes 5 top ferrules, 5 bottom ferrules and a RN nut. Connect any 1/16th inch (1.6 mm) outer diameter PEEK tubing to a 100 µL or smaller removable needle (RN) syringe

Guard columns can provide many benefits when used upstream from an analytical, preparative, or semi-preparative column. Guard columns are typically chosen to have the same packing as the primary column. Any compounds or particulate material that would block the frits or highly adsorb to the primary…

The PRP-X400 column provides a fast separation for glyphosate and its metabolites, due in part to the higher exchange capacity of the resin. It also performs well in other separations, such as inositol and sugar alcohols. This column operates well at room temperature, so a column heater is not…

7000 Series Modified Microliter® Removable needles Replaceable barrels and parts No dead volume Positive displacement syringe for use with liquids. A tungsten plunger wire travels inside the needle, eliminating dead volume. Knurled hubs are used exclusively on the 7000…

Guard columns can provide many benefits when used upstream from an analytical, preparative, or semi-preparative column. Guard columns are typically chosen to have the same packing as the primary column. Any compounds or particulate material that would block the frits or highly adsorb to the primary…