Franklin Electric

Compare Tool

Select up to 3 products

HomeAll Products

Franklin Electric

1 - 32 of 46
Sort
View
Show
  • Submersible Oil-Filled Pumps

    Franklin Electric

    These pumps feature an oil-filled motor housing with a radial lip seal on the motor shaft. They have an exceptional life expectancy because oil serves as a continuous lubricant for all the moving parts and the shaft seal. This non-toxic dielectric oil, often paired with an aluminum, cast iron or…

  • Aquarium Pumps

    Franklin Electric

    Little Giant® Aquarium series magnetic drive pumps are specifically designed for salt water and fresh water aquarium circulation and filtration applications.

  • MD-SC Series Magnetic Drive Pumps

    Franklin Electric

    Magnetically driven pumps for semi-corrosive chemicals and solutions. The Little Giant® MD-SC series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use. These pumps feature polypropylene, ceramic, and Nitrile parts.

  • MD-HC Series Magnetic Drive Pumps

    Franklin Electric

    Centrifugal Pump, Magnetic Drive, Ceramic Shaft (7884J25, J45) Non-submersible pumps with leakproof, seal-less magnetic drive 99.5% pure alumina ceramic shaft and thrust washers for long trouble-free service in use with harsh solutions Self-lubricating carbon impeller bushing which is…

  • MD Series Magnetic Drive Pumps

    Franklin Electric

    Centrifugal Pump, Magnetic Drive, Stainless Shaft Ideal for OEM applications For continuous, heavy duty pumping of mildly corrosive solutions and suspensions in pH range 5 to 9, having viscosity to 20 cP, at temperatures to 65°C (150°F) Employs magnetic coupling to drive…

  • WS Series Effluent Pumps

    Franklin Electric

    Submersible Effluent Pump available with ? hp, ½ hp, or 1 hp, cast iron motor and pump housing, motor has oil-filled chamber with double ball bearing, designed for hi-torque and is thermally protected with automatic reset (single-phase only), 2? NPT discharge, piggyback mechanical float switch for…

  • Pony Pump® Series Utility Pumps

    Franklin Electric

    Non-submersible self-priming transfer pumps. Both in 115 V and 12 VDC, these models are designed to operate 15 minutes per hour. Model 370 is designed for higher and lower temperatures.

  • 9ENH Series Effluent Pumps

    Franklin Electric

    4/10 hp Submersible High-Head Effluent Pump designed to handle 3/4" solids. Shut-off at 45', cast-iron base, motor housing and motor cover (thermoplastic cover on SFS models), thermoplastic elastomer non-clog impeller, thermal overload protection, and 1-1/2" FNPT discharge. Automatic "RF" versions…

  • 10ENH Series Effluent Pumps

    Franklin Electric

    1/2 hp Submersible High-Head Effluent Pump designed to handle 3/4" solids. Shut-off at 60', cast-iron base, motor housing and motor cover (thermoplastic cover on SFS models), thermoplastic elastomer non-clog impeller, thermal overload protection, and 1-1/2" FNPT discharge. Automatic "RF" versions…

  • 6 Series Sump Pumps

    Franklin Electric

    1/3 hp submersible sump pump with cast iron housing, polypropylene base, polycarbonate cover, and thermal overload protection. “CIA” models have integral diaphragm switch with “on” level at 7" to 10" and “off” level at 1" to 4". The 6-CIA-RS has a piggyback diaphragm switch with same “on/off”…

  • 5 Series Utility Pumps

    Franklin Electric

    5 Series: 1/6 hp Submersible Sump/Utility Pump with cast aluminum housing, plastic base, bottom sump-type pick-up with removable plastic screen, pumps down to 1/8", thermal overload protection, 1" FNPT discharge with a garden hose adapter. 5-ASP features a diaphragm pressure switch…

  • 9EN Series Effluent Pumps

    Franklin Electric

    4/10 hp Submersible Sewage Pumps designed to handle 3/4" solids. Permanent split capacitor (PSC) motor, heavyduty cast iron housing, volute and cover, non-clog thermoplastic elastomer impeller and thermal overload protection. The "RF" automatic models feature a “piggyback” mechanical float switch…

  • ESP Series Sump/Effluent Pumps

    Franklin Electric

    Manual and Automatic Sump/Effluent pumps, cast iron pump casing (Model ending - P are thermoplastic), 1-1/2" NPT reducer bushing for 1-1/4" discharge included. Automatic versions feature a remote float or vertical float switch.

  • BE Series Effluent Pumps

    Franklin Electric

    Centrifugal Self-Priming Effluent Pump available with ½ hp or ¾ hp, cast iron casing, higher than NEMA service factor dual compartment motors, built-in check valve facilitates fast priming and guards against siphoning action. Self-priming effluent pumps designed for installations with septic tanks…

  • WE Series High Head Filtered Effluent Pumps

    Franklin Electric

    Franklin Electric submersible motor, PPO staging, 10' SJOW lead, and poppet check valve.

  • ES50 High Capacity Sump/Effluent/Sewage Pumps

    Franklin Electric

    Little Giant performance, plus energy savings — the ES Series pumps are a line of energy-saving, high performance, fully submersible sump, sewage and effluent pumps designed for the professional plumbing contractor. ES Series Pumps consume less energy while delivering greater pump flow and…

  • Cast Bronze 8 Series Sump Pumps

    Franklin Electric

    4/10 hp submersible sump pump with cast iron housing (8-CBA and 8-CBM have cast bronze housing), polypropylene base, polycarbonate cover, thermal overload protection. “CIA” and “CBA” models have integral diaphragm switch with “on” level at 7" to 10" and “off” level at 1" to 4". 1-1/2" FNPT…

  • B50S Series Utility/Dewatering Pumps

    Franklin Electric

    1/2 hp Self Priming Utility pump constructed of durable cast iron with built-in suction check valve engineered to prime itself quickly once it has been filled with water, higher than NEMA standard service factor, dual compartment motor, semi-open, cast iron impeller.

  • Parts Washer Pumps

    Franklin Electric

    Submersible pumps with Fluoroelastomer (FKM) seals, 1/4" MNPT discharge, master builders conduit fitting, 6' power cord without plug. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory.

  • Epoxy Encapsulated Submersible Pumps

    Franklin Electric

    Epoxy filled pumps are compact in design, energy efficient, and have a corrosion-resistant plastic housing.

  • Swimming Pool Pumps

    Franklin Electric

    Little Giant® swimming pool cover pumps help safeguard and protect your pool cover from prolonged accumulation of rain or melting snow. Available in manual and automatic versions, pool cover pumps easily adapt to a standard garden hose for water removal.

  • 14EH Series Effluent Pumps

    Franklin Electric

    1/2 hp Submersible High Head Effluent Pump designed to handle 3/4" solids. Shut-off at 50', heavy-duty cast iron housing, volute and impeller, thermal overload protection, and 2" FNPT discharge.

  • Permanently Lubricated Pumps

    Franklin Electric

    For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild…

  • UP16M Series Utility/Dewatering Pumps

    Franklin Electric

    1/6 hp Submersible Utility pump with corrosion-resistant aluminum pump casting, continuous duty ?oil free” motor, bottom suction design with built-in strainer to eliminate internal damage from possible debris, removable filter screen for easy cleaning, and ¾? NPT discharge.

  • MD-CK Series Magnetic Drive Pumps

    Franklin Electric

    Magnetically driven pumps for highly corrosive chemicals and solutions. The Little Giant® MD-CK series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use. These pumps feature polyvinylidene fluoride, PTFE, carbon, ceramic and Fluoroelastomer (FKM) parts.

  • ES33 Submersible Sump/Effluent Pumps

    Franklin Electric

    Little Giant performance, plus energy savings — the ES Series pumps are a line of energy-saving, high performance, fully submersible sump, sewage and effluent pumps designed for the professional plumbing contractor. ES Series Pumps consume less energy while delivering greater pump flow and…

  • Cast Bronze 10 Series Effluent Pumps

    Franklin Electric

    1/2 hp submersible sump pump with cast bronze housing, polypropylene base, screened intake and thermal overload protection. Automatic models have integral diaphragm switch with “on” level at 7" to 10" and “off” level at 2" to 5". 1-1/2" FNPT discharge.

  • 1-T/S Submersible Oil-Filled Pumps

    Franklin Electric

    For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild…

  • 5.5 Series Sump Pumps

    Franklin Electric

    1/4 hp submersible sump pump designed to handle 3/8" solids. Zinc housing, glass-filled polypropylene base and cover, non-clog nylon impeller, thermal overload protection, 1-1/4" FNPT discharge with garden hose adapter and snap-action float switch. “On” level at 7" to 10" and “off” level at 2" to 5".

  • WS Series Effluent Pumps

    Franklin Electric

    Submersible ½ hp Effluent pumps, cast iron motor and pump housing, motor has oil-filled chamber with double mechanical seals, designed for hi-torque and is thermally protected with automatic reset.

  • ES40 High Capacity Sump/Effluent/Sewage Pumps

    Franklin Electric

    Little Giant performance, plus energy savings — the ES Series pumps are a line of energy-saving, high performance, fully submersible sump, sewage and effluent pumps designed for the professional plumbing contractor. ES Series Pumps consume less energy while delivering greater pump flow and…

  • High Pressure Pumps

    Franklin Electric

    Non-submersible high pressure pump used for carpet cleaners, dispenser displays and pressure washer applications. 3/8" OD barbed intake and discharge, 24" lead wires.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.