EA11A is an easyview Type K Single Input Thermometer. This Hand Held Thermometer has a temperature range (Type K) from -58 to 1999°F (-50 to 1300°C). Features a Dual Display LCD, Manually store/recall up to 150 readings and Mode Min/Max/Average functions. Includes 6 AAA Batteries, general…

With the CO15, checking CO levels is as easy as pushing just 1 button on the model CO15, which measures up to 999ppm. An audible alarm indicator will continuously beep starting at 25ppm (preset warning level - value can be adjusted) and the display will flash until the CO level goes down to normal…

Measures dissolved oxygen from 0 to 20.0mg/L and 0 to 100.0% oxygen plus temperature from 32 to 122°F (0 to 50°C) Automatic Temperature Compensation from 0 to 50°C via temperature probe sensor built into polarographic type oxygen probe Offset adjustment used for zero function to make…

Large easy to read (99,999 count) LCD display Autoranging with 0.1% basic accuracy Hold button freezes displayed reading Ergonomically designed and pocket sized housing with protective finger guard Easy to operate by simply contacting the rotating object with the sensor tip and read …

Large 5 digit LCD display is easy to read Built-in memory recalls last MAX/MIN value stored Autoranging with 0.05% accuracy Non-contact measurements from 5 to 99,999rpm Use reflective marker on object to be measured and point the integral light beam or accurate readings updated every second…

4-Channel datalogging with 6 Thermocouple types (J, K, E, T, R,S) and 2-Channel datalogging with RTD (Pt100Ohm) probes Displays [T1, T2, T3, T4] or differential [T1-T2] reading Offset adjustment used for zero function to make relative measurements Stores 99 readings manually and 20M…

Pitot Tube measures Air Velocity/Airflow in difficult-to-reach or tight locations where a vane anemometer won't fit Simultaneous display of Pressure, Air Velocity or Air Flow plus Temperature ±0.7252psi range 5 selectable units of pressure measurement Max/Min/Avg recording and Relative time…

The DT500 is a Laser Distance Meter with Bluetooth. This meter will measure the distance from the meter to a point 229ft (70m) away. The DT500 transmits distance readings to Apple iOS mobile devices and can measure Area and Volume as well as perform sum, difference and Pythagorean theorem…

3-in-1 combination meter Combines the functions of a Humidity Meter, Type K Thermometer, and InfraRed Thermometer for non-contact surface Temperature measurement Built-in InfraRed Thermometer for non-contact temperature measurement to 932°F (500°C) with 30:1 distance to target ratio Type K…

Includes EC500 pH/Conductivity meter with combination high accuracy multi-ranging Conductivity sensor for Conductivity, TDS, Salinity, pH and Temperature measurements Includes DO600 Dissolved Oxygen meter with electrode, replacement membrane cap, electrolyte, and polishing paper Complete with…

Fast response detection of gas leakage Detects combustible gases - Liquefied Natural Gas (LNG) and Liquefied Propane Gas (LPG) from 500 to 6500ppm Highly sensitive detection circuitry Audible and visual alarm Continuous operation up to 4 hours LED indicators for gas leakage and…

407790A is a Real Time Octave Band Analyzer. Extech’s Type 2 Integrating Sound Level Meter with Octave and 1/3 Octave Band Real Time is displayed on a large 3.5" 320x240 TFT color backlit LCD. Wide 100dB range of 30 to 130dB. Stores readings on microSD card. Complete with Windows…

Features: Quickly indicates the moisture content of materials with Pinless technology without damaging the surface; Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length) Manually store/recall up to 20 labeled readings Works on multiple wood…

The MG310 is a Compact Insulation Resistance Tester which allows quick and easy testing/troubleshooting of motors, transducers, and other industrial appliances. Wide range measurement up to 1000V with Insulation Resistance to 5.5GΩ. Includes an easy snap on protective hard cover and soft…

Waterproof meter with high-accuracy multi-ranging sensor Measure Salinity in aquaculture, environmental studies, ground water, Koi ponds, irrigation, drinking water, and other applications Autoranging with 2 ranges of measurement Built-in NaCl Conductivity to TDS conversion factor …

A complete solution for the Restoration Contractor MO290 - Pinless Moisture Psychrometer + InfraRed Thermometer Monitor moisture in wood and building materials with virtually no surface damage Includes the following contact moisture reading probes: Pin Probe,…

The EX655 is a 600A True RMS AC/DC Clamp meter. This clamp meter also measures AC/DC voltage, resistance, capacitance, frequency, temperature, continuity/diode test and has an NCV detector. The EX655 has a 1.18" jaw size which accommodates conductors up to 350 MCM. This meter also features a…

The CO240 measures Carbon Dioxide (CO2), Air Temperature and Humidity, as well as Dew Point and Wet Bulb calculations. The user settable high alarm with audible beeper is perfect for conducting a quick check of CO2 level to help adjust the environmental conditions in an enclosed area, such as a…

7-in-1 Meter with Lab-Quality Performance Measures Conductivity, TDS, Salinity, Resistivity, pH, mV and Temperature Waterproof housing (meets IP57) Automatic one button pH calibration (4, 7, and 10pH) Choice of 3 point pH calibration for better accuracy One point Conductivity calibration…

Full function autoranging DMM includes AC/DC Voltage and Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode and Continuity Current measurements to 2000A through the clamp and 400mA via test leads Large 4000 count backlit display for high resolution and easy viewing in dimly lit…

The Extech EX470A True RMS Multimeter and Infrared Thermometer with Capacitance, Frequency, and Duty Cycle Measurements and 2 K-Type Remote Probes is the perfect meter for HVAC or plant maintenance. The IR thermometer measures the surface temperature from -4 to 518 °F (-20 to 270 °C)…

• Max/Min with reset function • Rear calibration adjustment pot • Humidity: 10 to 99% RH • Temperature: 14 to 140°F (-10 to 60°C) • Optional RH calibration bottles • Accuracy: ±4%RH; ±1°C/1.8°F • Dimensions: 4.3 x 3.9 x 0.78" (109 x 99 x 20mm) • Weight: 6oz (169g) • Complete with built-in stand,…

High accuracy and performance for low resistance measurements Large 0.7" (18mm) LCD 1999 count Manual zero display adjust Overrange indication Compact, durable field service housing with protective cover Complete with 4-wire cables with Kelvin clip connectors

The RH200W-T is a transmitter for Extech's RH200W Hygrothermometer base station. Sync up to 8 transmitters to the base station for continuous monitoring. Transmitters can be up to 98 feet from the base station. Includes a transmitter and 2 AA batteries.

Thomas No. 1215Y38/1215Y39 Metal Vane withstands temperatures to 158°F (70°C) and air velocity to 6900ft/min Datalogger date/time stamps and stores readings on an SD card in Excel® format for easy transfer to a PC Adjustable data sampling rate: 1 to 3600 seconds Stores 99 readings…

DC/AC Current True RMS Type K thermometer DC Zero Clamp-on multimeter with built-in non-contact InfraRed Thermometer Infared thermometer and rugged double molded housing Non-contact InfraRed Temperature measurements with laser pointer Peak hold captures inrush currents and Transients

Programmable heat index alarm Displays temperature, humidity, and heat index Calendar mode displays day, date and time Stopwatch/chronograph mode with1/100 second resolution Fastest/Slowest/Average Lap recall 99 lap counter with 30 lap/split memory 10 hour countdown timer with audible …

Large LCD displays pH or mV and Temperature simultaneously Microprocessor provides for Automatic Buffer recognition Memory stores 25 readings Automatic Temperature Compensation Unit is completely waterproof when electrode is connected to the meter Low Battery indicator and Auto Power…

Leq and SEL measurements with built-in datalogger and PC interface Features: 4-digit multifunction LCD with analog bargraph Precise linearity over wide range (100dB) Display modes: SPL, SPL MIN/MAX, SEL, and Leq Programmable integrating time A and C Frequency weighting …

The SL510 is Extech’s ultra-compact sound meter which meets class 2 standards with ±1dB high accuracy. Allows for quick and reliable sound level testing. It features a large backlit display for easy viewing and measures A & C weighting from 35 to 130dB with Fast and Slow response…

Take pinless (non-invasive) Moisture measurements on wood and building materials without damaging the surface with the depth of approx. <4" (100mm) with Extech’s MO57 Moisture Meter. The ball moisture sensor provides smooth gliding on hard or delicate surfaces. Easy-to-operate with…

Tests voltage up to 10kV and measures Insulation Resistance to 500GOhm High test voltages up to 10kV with Insulation Resistance to 500GOhm Polarization Index (PI) measurement Dielectric Absorption Ratio (DAR) measurement EnerSave™ limits test duration to 10 seconds to save…