Labx® 123 is engineered as a lightweight low lint wiper.  It is 100% biodegradable and made from 100% manila hemp. Engineered for light weight and low linting Meets government specification AA-50177, Type 1, Class 5 light Weight, Wet Strength Applications Tray liner and wet…

Durx® 570 is an ideal choice for a general purpose wiper. It is lighter in weight and more economical than Durx®?670.  Manufactured without the use of binders or surfactants, ion levels and organic extractables remain low. No binders or other chemical additives Smooth, highly absorbent…

Berkshire Ultra-Seal® 3000 is a high-sorbency, tubular, sealed-edge, cleanroom-laundered, two-ply wipe recommended for use in controlled environments rated ISO Class 3 and above. It is composed of 100% continuous filament polyester knit fabric. These properties provide Ultra-Seal® 3000…

Bordered Sealed Edge Cleanroom Laundered 100% Polyester Knit. 100% continuous filament knit polyester No run interlock construction Laundered in an ISO Class 4 (Class 10) cleanroom Critically low particles, fibers, ions and extractables 4-side border sealed edges increase durability…

Sterile SatPax 1000 combines Durx 670 nonwoven wipers composed of a hydroentangled nonwoven blend of 55% cellulose and 45% polyester with a high saturation level of 70% IPA and 30% DI water. This pre-wetted format provides a cost effective and easy to use solution versus traditional bulk…

ValuClean® Plus is a hydroentangled rayon/polyester nonwoven recommended for ISO Class 5-8 environments.  It offers exceptional absorbency, durability and cleanliness at an economical price point. Due to its 50% rayon content, ValuClean® Plus has best-in-class absorbency, reducing actual…

Polx®1200 is a knife cut unlaundered cleanroom wiper recommended for ISO Class 5-7 environments.  It is composed of 100% continuous filament polyester knit fabric. 100% continuous filament polyester knit Knife cut edge No binders or surfactants Low contamination compared to…

100% continuous filament polyester knit Solution: 0.525% Sodium Hypocholrite Innovative burstable pouch technology Ultrasonically sealed edge for reduced fiber contamination Sheet Size: 9″ x 9″ (23cm x 23cm) 15 Sheets Per Pack / 12 Packs Per Case 180 Total Sheets Per Case

Gamma irradiated and validated sterile to a Sterility Assurance Level of 10-6 in accordance with ANSI/AAMI/ISO guidelines. The wipers have a higher saturation level to support the critical solution contact time needed in the regulated industries.  55% cellulose / 45% polyester…

MicroFirst® is the first nonwoven wiper engineered and manufactured specifically for cleanroom applications. It is the ideal choice for cleaning in laboratories, aerospace, electronics, food processing, photo processing and semiconductor, circuit board, pharmaceutical and biomedical device…

100% continuous filament knit polyester and ultrasonically sealed edge for reduced fiber contamination.  Laundered and packaged in ISO Class 4 (Class 10) cleanroom. Critically low particles, fibers, ions and extractables High abrasion resistance Excellent absorbency Applications …

The Berkshire disk is an ideal accessory to have in any chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories.

Pro-Wipe 750 is a thermally bonded multi-layer composite nonwoven wiper recommended for ISO Class 5 and above environments composed of a layer of cellulose bonded between two outer layers of polypropylene. This combination of properties provides Pro-Wipe 750 with exceptional cleanliness, absorbency…

Superior strength and absorbency make Durx 670 an ideal choice for a general purpose wiper. Manufactured without the use of binders or surfactants, ion levels and organic extractables remain low. Durx 670 can be used for cleaning and maintenance in laboratories, aerospace, defense electronics, food…

Pro-Wipe® 880 is ideal for cleaning areas in which acids and solvents are a concern. The multi-layer construction produces a soft material that won’t scratch or abrade even the most sensitive parts in laboratories, aerospace, defense electronic, food processing, photo processing,…

SatPax® 550 are pre-wetted meltblown polypropylene wipers that are available in resealable pouches. The wiper is manufactured utilizing 70% semiconductor grade IPA (isopropyl alcohol) and 30% RO/DI H2O filtered to 0.2 µm.  Soft, 100% meltblown polypropylene Lot number on each…

SatPax® 1000 are pre-wetted nonwoven polyester/cellulose wipers that are available in resealable pouches and canisters. The wiper is manufactured utilizing semiconductor grade IPA (isopropyl alcohol) and RO/DI H2O filtered to 0.2 µm.  55% cellulose/45% polyester, nonwoven Available…

MicroSeal® 1200 is an ultrasonically sealed edge cleanroom laundered wiper recommended for ISO 3-5 environments.  Its low endotoxin levels and high absorbency makes it ideal for pharmaceutical and medical device manufacturing applications. 100% polyester knit wipers with ultrasonically…

Berkshire Twillx® 1622 is an environmentally friendly wiper designed for cleanrooms rated ISO Class 6 (Class 1000) and above. Twillx® 1622 is 100% biodegradable. It is made from 100% cotton woven in a twill pattern and bias cut to minimize contamination. Twillx® 1622 is engineered…

Lensx® 90 is 100% biodegradable. It is made from 70% rayon and 30% cellulose. Lensx® 90 is engineered for extreme softness and for use in the cleaning of delicate surfaces.  Meets government specification AA-50177, Type 1, Class 1 Burst Strength (PSI/10 sheets dry) 51 Acidity (pH…

Continuous filament polyester knit with sealed edges Retains 93% of particles initially captured Minimal particles, fibers, ions and extractable Low airborne partical release Cleanroom laundered

Gamma irradiated and validated sterile to a Sterility Assurance Level of 10-6 in accordance with ANSI/AAMI/ISO American National Standards and European Standards EN1174 and EN552. These pre-wetted sterile wipers are ideal for aseptic environments and support areas where microbial exclusion is…

100% Continuous Filament Knit Polyester Cleanroom laundered, laser sealed edge for reduced fiber contamination Critically low levels of particle and fiber release with excellent durability 9″ x 9″ (23cm x 23cm) 150 Sheets Per Pack / 14 Packs Per Case 2,100 Total Sheets…

MicroFirst LP® contains DuPont Lyocell, which is exceptionally soft and absorbent, making it ideal for wiping delicate surfaces and packaging sensitive components. This patented process eliminates binders and additives, which makes it a cleanroom wiper that rivals others in cleanliness and…

ProjX® 700 is a creped cellulose / polyester nonwoven wiper recommended for ISO Class 5 and above environments composed of a hydroentangled nonwoven blend of 55% cellulose and 45% polyester. This combination of properties provides ProjX® 700 with the level of absorbency, abrasion resistance and…

Pro-Wipe® AP is an all purpose industrial rayon/polyester nonwoven wiper. Durable and low-linting, Pro-Wipe ® AP is tough enough to be a rag replacement and clean enough to be used in a controlled manufacturing environment. 50% rayon / 50% polyester hydroentangled nonwoven blend No…

Superior strength and absorbency make Durx® 670 an ideal choice for a general purpose wiper. Manufactured without the use of binders or surfactants, ion levels and organic extractables remain low. Durx® 670 can be used for cleaning and maintenance in laboratories, aerospace, defense…

Pro-Wipe® 750 is solvent resistant with superior absorbency. It makes an excellent upgrade for industrial wiper users. Thermally bonded 60% polypropylene/40% cellulose Highly sorbent and durable No secondary binders Cellulose core provides excellent wicking of solvents …

ValuSeal® 1500 is a laser sealed edge cleanroom laundered wiper required for ISO Class 3 and above environments composed of 100% continuous filament polyester knit fabric.  This combination of properties provides ValuSeal®1500 with a high level of cleanliness and chemical compatibility…