Valutek’s 12” PVC powder-free ambidextrous cleanroom glove is constructed from polyvinyl chloride plastic with beaded cuff and has a light bisque texture. This glove is electrostatic dissipative with a low level of particulate and extractable counts, offering the highest protection to…

Valutek’s disposable 3-ply polypropylene face mask is constructed from non woven pleated, 7” x 3½” rectangular, glass-free polypropylene material with a malleable flat aluminum noseband. Available in both floss-covered round elastic ear-loops and head band design. All…

Valutek’s disposable cross-linked polyethylene shoe covers are manufactured with 100% cross-linked polyethylene with heat-sealed seams. These shoe covers are strong, durable, and impervious to liquids. Available in lightweight, standard weight, and heavy weight. All Valutek shoe covers are…

Valutek’s 9” ambidextrous disposable latex powder-free glove is constructed from 100% natural rubber latex with fully textured design and beaded cuff. This glove provides high-level dexterity, is strong, reliable, durable and comfortable hand protection for operators. Packaged in a…

Valutek’s pre-wetted laser sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…

Valutek’s disposable anti-skid SPP ESD shoe cover is manufactured with 100% non-linting, non-woven spunbond polypropylene fabric. This shoe cover has stitched seams, sprayed latex anti-skid treads on the bottom for safety, and a 19.6” long conductive ribbon stitched on a solid seam to…

Valutek’s disposable latex powder-free black finger cots are constructed from 100% natural rubber latex, rolled with a smooth finish, and have a beaded edge. The finger cots offer a consistent conductive level and are primarily used where static charge is a major concern. Packaged in a…

Valutek’s 2-Ply ultrasonic sealed polyester wiper is constructed from 100% continuous filament polyester in a 2-ply double-knit, no-run, interlock pattern with ultrasonic sealed edges. This wiper is ultraclean and highly absorbent with critically low levels of particulate and extractable…

Valutek’s disposable nitrile powder-free finger cots are constructed from 100% clean, synthetic nitrile polymer, contains no rubber latex, fillers or silicones. With a smooth finish and beaded edge. The finger cots are inherently static dissipative. Packaged in a controlled environment, all…

Valutek’s PE-coated polypropylene non-skid shoe cover is manufactured with a polyethylene coated outer layer and a non-linting, non-woven spunbond polypropylene inner layer with stitched seams and elastic ankle cuffs. The shoe cover has a durable skid-resistant embossed PVC sole design and…

Valutek’s ESD polyester wiper is constructed from 100% continuous-filament polyester in a double-knit, no-run, interlock pattern with a conductive fiber designed to dissipate electrical charge. This substrate exhibits moderate absorbency and low levels of particulate and extractable counts.…

Valutek’s nylon knit wiper is constructed from 100% continuous filament nylon in a double-knit, no-run, interlock pattern. This clean and absorbent wiper offers excellent softness and superior strength. Laundered and packaged in a cleanroom, all Valutek wipers are tested and manufactured in…

Valutek’s low texture microfiber wiper is constructed from a blend of 75% continuous filament polyester and 25% nylon in a double-knit, no-run interlock design, with ultrasonic sealed edge. Laundered and packaged in a cleanroom, all Valutek wipers are tested and manufactured in ISO compliant…

Valutek’s twill-patterned cotton wiper is constructed from 100% tightly woven long stable cotton. The fabric of this wiper is bias-cut and has a cross section of 120 x 60 threads per square inch. This wiper is clean and durable with high heat resistance. All Valutek wipers are tested and…

Valutek’s nylon glove liner is manufactured with lightweight non-linting, fine-gauge knitted, 100% continuous filament virgin nylon. The glove has an ambidextrous shape in one universal size. This glove liner fits comfortably under latex, PVC, or nitrile gloves. The seamless design limits…

Valutek nitrile powder-free ambidextrous 12” glove is constructed from 100% clean synthetic nitrile polymer and contains no rubber latex, fillers or silicones. This glove comes with beaded cuff and a textured fingertip design. Our specially formulated, high modulus nitrile provides unmatched…

Valutek’s disposable anti-skid SPP shoe cover is manufactured with 100% non-linting, non-woven spunbond polypropylene fabric with stitched seams and sprayed latex anti-skid treads on the bottom for safety. The shoe covers are lightweight, strong, and durable. All Valutek shoe covers are…

Valutek’s pre-wetted spunlace non-woven wiper is composed of a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airbone…

Valutek’s pre-wetted pressure-heat sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…

Valutek’s disposable microporous lab coats are manufactured with 100% non-linting microporous film bonded with a non-woven fabric that provides superior barrier protection against non-toxic particulates, liquids, spray and dust. The lab coats are highly breathable and provide great operator…

Valutek’s college ruled spiral-bound notebooks are manufactured with high-density polypropylene covers, with plastic spirals, and durable cleanroom papers. The covers have an impregnated antistatic property with excellent chemical resistance. The pages are printed with IPA resistant low…

Valutek’s disposable microporous coveralls are manufactured with 100% non-linting microporous film bonded with a non-woven fabric to provide superior barrier protection against non-toxic particulates, liquids, spray and dust. All coveralls have a flap over zipper closure, elastic wrist, and…

Valutek’s disposable SPP beard cover is manufactured with 100% non-linting, non-woven, spunbond polypropylene fabric, which provides comfortable operator protection. The beard cover has a filament covered, unexposed elastic band for secure fit and closure. All Valutek beard covers are tested…

Valutek’s spunbond polypropylene disposable lab coats are manufactured with strong, lightweight, breathable, 100% non-linting, non-woven, spunbond polypropylene fabric. The lab coats are knee length with 5 snap closures, elastic cuffs, and a single ply shirt collar design. These lab coats do…

Valutek’s ultrasonic sealed polyester wiper is constructed from 100% continuous filament polyester in a double-knit, no-run, interlock pattern with ultrasonic sealed edge. This wiper is an ultraclean and highly absorbent wiper with extremely low levels of particulate and extractable counts.…

Valutek’s light-weight polyester wiper is constructed from light-weight, 100% continuous filament polyester in a double-knit, no-run, interlock pattern with cold knife cut edges. This wiper is a clean and moderately absorbent wiper with low levels of particulate and extractable counts.…

Valutek’s laser sealed polyester wiper is constructed from 100% continuous filament polyester in a double-knit, no-run, interlock pattern with a laser sealed edge. This wiper is an ultraclean and highly absorbent wiper with critically low levels of particulate and extractable counts.…

Valutek’s light-weight polyester wiper is constructed from light-weight, 100% continuous filament polyester in a double-knit, no-run, interlock pattern with cold knife cut edges. This wiper is a clean and moderately absorbent wiper with low levels of particulate and extractable counts.…

Valutek’s spunlace non-woven wiper is constructed from a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester. This composite substrate combines the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic yarn, which has a low level of…

Valutek’s 12” ambidextrous sterile nitrile cleanroom glove is constructed from 100% synthetic nitrile polymer. This glove contains no natural rubber latex, is silicone free and has a textured fingertip design with beaded long cuff. This glove is packaged in a cleanroom compatible…

Valutek’s polyester floor mop head is manufactured with 100% white filament polyester in strands to absorb and encapsulate liquids for maximum sorptive capacity. The knitted fabric has extremely low particle and fiber generation which ensures excellent cleaning results. Laundered and packaged…

Valutek’s cleanroom tubular polyester floor mop head is manufactured with 1/2” knitted tube, made of 100% white filament polyester in a spaghetti style looped to form edgeless tubular strands to absorb and encapsulate liquids for maximum sorptive capacity. The knitted fabric is…