Polycarbonate vial with screw-on cap, 1 1/8 in. diameter x 4 ½ in. (2.9 cm x 11.4 cm). Holds grinding media up to 1/2 in. Fits 2196-16-PE Holder and 2664 Cryo-Block. Grinding load per vial 20 mL. Sold as a pack of 48 Vials with 48 caps (2253C).

3621 Carver® Model C: Full-size 12-ton (10.9 metric ton) Carver hydraulic laboratory pellet press that accepts 13 mm, 31 mm, 35 mm, and 40 mm pellet die sets. Manually controlled. Ideal for pressing sample pellets for XRF, IR, and other analytical techniques. Typical samples include cement,…

These cryogenic gloves are designed to protect the hands and arms from the hazards associated with ultra-cold materials. Highly recommended when operating the 6770 and 6870 Freezer/Mills. These multi-layer-insulated gloves are lightweight and flexible, allow excellent dexterity, and are comfortable…

Polypropylene, self-standing 2 mL microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64 inch x 1 27/32 inch long (10 mm x 47 mm). Tube is not pre-cleaned. Grinding load per tube is 60-120 mg; mixing load 1 mL. Sold in package of 500. Ideal for fast and simple…

The 6875D Freezer/Mill® is a high-throughput, dual chamber cryogenic grinder with a self-contained liquid nitrogen tub and insulated case. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. This mill…

While most titer plates can be used in the Geno/Grinder, these sturdy titer plates have been tested extensively with various samples, and resist perforation by steel grinding balls even at high clamp speeds. They can be used for many applications including sample libraries, mother-to-daughter…

Frosted polyethylene vial with screw-on polyethylene cap. The nominal outer diameter measures 1/2-inch x 2-inch long (12.7 mm x 50.8 mm). Holds one 3/8-inch (9.5 mm) stainless steel grinding ball (#2155). May be used with the Cryo-Block (#2663) and the vial holder (#2191). Grinding load per vial is…

Large Grinding Vial Set: Set includes stainless steel impactor and two end plugs, plus four polycarbonate center cylinders (6801C4). Makes one complete vial plus three spare center sections. Transparent plastic allows visual check of grinding progress. Sample capacity up to 50 mL. Vial Rack…

High-energy ball mill with dual clamps that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst…

High-energy ball mill that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst supports, glass,…

Cryogenic Dewar designed for storing and dispensing small amounts of liquid nitrogen. Sturdy, aluminum, five-wheel roller base makes moving dewar from room to room safe and easy. Includes liquid withdraw device for dispensing liquid nitrogen directly into the Freezer/Mill at rates up to 8 liters…

Thick, rugged foam block holds 48 standard 5 mL or 4 mL centrifuge vials. Used with polycarbonate and frosted polyethylene vials (#2241-PEF-200, #2241-PC). The holders are designed to hold vials securely in place on the Geno/Grinder during processing. They are lightweight and can also be used on…

The Cryoplate keeps sample lids cold during the grinding process. Used with the Cryo-Block or Cryo-Adapter (#2650) for titer plates. The Kryo-Tech accessories are used to chill samples to cryogenic temperature and to maintain temperature during grinding in the Geno/Grinder.

Hardened Steel Grinding Container: Grinding container with puck, dish, and lid made of 52-100 hardened tool steel. 6.9 in. diameter x 2.9 in. high, 17.5 lbs. (17.5 cm x 7.5 cm, 8 kg). Nominal volume 340 mL, recommended grinding load 20-50 mL. Includes puck, ring, dish with Oring gasket, and lid. …

Each 6870 Freezer/Mill® is supplied with your choice of 6870L Large Vial Accessory Package or 6870S Small Vial Accessory Package. The 6870 Freezer/Mill® can hold up to four small vials* (6751, 6761, 6771) or one mid-size vial (6881, 6883, 6885) The Accessory Package for mid-size vials must…

NOTE: These products are only available for sale to Domestic U.S. Customers.

Large ceramic grinding cylinders with angle-cut ends for use with standard 50 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS) or extracting oil from fish and seafood. The angle-cut ends help the cylinders to shear the sample matrix…

= 30 µm powder, 150 g bottle. Will bond 200-250 or 600-750 disks. Can be blended with sample at 10–20% by weight to form moisture-resistant XRF sample disk. Instructions included. NOTE: These products are only available for sale to Domestic U.S. Customers.

For 6881, 6883, and 6885 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.

2 mL reinforced polypropylene, self standing microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64-inch x 1 27/32-inch long (10 mm x 47 mm). Grinding load per tube 60-120 mg, mixing load 1 mL. Sold in package of 200. Vials can be filled and sealed individually…

The 1600 MiniG® is the ideal solution for labs that want a compact yet powerful tissue homogenizer. This mechanical disruptor is designed to effectively disrupt cellular materials by oscillating one or two deep-well titer plates vertically. Clamp typically holds up to 6 x50 mL vials or 48 x 2…

The Cryo-Blade™ is an ultra high-capacity cryogenic grinder for sample preparation and processing of up to 1 kg of sample. The Cryo-Blade automatically dispenses liquid nitrogen to allow the sample to reach cryogenic temperatures and then activates a grinding phase to pulverize samples,…

2100 Grinding Ball Dispenser: Simultaneously dispenses one 5/32 in. (4 mm) steel grinding ball (2150) into each well of a standard 96-well titer plate, including 2200 and 2210 titer plates. 2110M 24-Pin Magnet: 24 magnet-tipped pins on plate with handle. Inserts or removes 3/8 in. (9.5 mm)…

Disposable closed X-ray cell with collar used throughout theworld for fast, dependable, reproducible running of liquidsamples in XRF spectrometers. Includes a polyethylene snap-ringand cup with snap-post vent and reservoir. Requires thin windowfilm. Sold in bags of 100. Features …

Square well sealing mat specifically designed for the 2205 96-Well Reinforced Titer Plate. Sold in package of 50.

For grinding electronic components to test for chromium under RoHS/WEEE directives. Cr-free ASTM 06 steel impactor and end plugs, polycarbonate center cylinder (6801C). Will not add Cr like stainless steel components of 6801 vial. Set includes one complete vial plus three extra cylinders. Sample…

6906 Short Cryogenic Transfer Hose: 4 ft. (1.2 m) long flexible stainless steel hose suitable for transferring cryogenic fluids such as liquid nitrogen. Fitted with a 3/8 in. (9.5 mm) NPT male fitting on one end and a CGA295 female fitting on the other end. Compatible with the 6905 Portable…

Multiple Sample Adapter for Seven 1/2 Inch Vials: Holds seven vials, each 1/2 in. (12.7 mm) in diameter, for simultaneous running in 8000M Mixer/Mill®. Suitable vials include SPEX SamplePrep 3111, 3114, 3116 and 3117. Vials run at one time should be same length. Can be used in 8000D…

Deep-well reinforced titer plate with a 96-well format. Each square well has a volume of 1.4 mL and a working volume of 1.0 mL. Compatible with our 2010 Geno/Grinder due to the toughened wells that withstand bead beating. This plate can also be used with the 1600 MiniG.

Cryo-Blocks are made of aluminum. They hold and chill titer plates and vials to grind plant and animal tissue for nucleic acid and protein extractions. Cryo-blocks can be quickly chilled in the 2600 Cryo-Station, and will keep samples cold during grinding to preserve RNA and proteins from heat…

2190 Vial Rack : Holds 24 3116PC vials, 24 2241-PC vials, or 24 2241-PE vials. All three vials hold a single 3/8 in. (9.5 mm) steel grinding ball 2195 Large Capacity Clamp Assembly : An oversize clamp that will hold centrifuge tubes or a double load of titer plates. Designed to hold twelve…

Small Stainless Steel Center Cylinder For 6751 vial set. Replaces 6751C when sample contact with plastic is not advised. Made of nonmagnetic stainless steel.