SPEX SamplePrep
-
Ball and Vial Sets
SPEX SamplePrepPolystyrene Vial w/Slip-On Cap, 0.5 x 1 inch: 1/2 in. (12.7 mm) diameter x 1 in. (25.4 mm) long. Includes slip-on polyethylene cap. Volume 2.5 mL; mixing load approximately 1 mL. Accepts SPEX SamplePrep 3112 or 3119 methacrylate balls. Methacrylate Balls, 3/8 inch: Methacrylate Balls 3/8…
-
Ceramic Grind Cyld 5/32"x5/16" angle cut
SPEX SamplePrepSmall size ceramic grinding cylinder with angle-cut ends for use with standard 5 or 15 mL centrifuge tubes. NOTE: These products are only available for sale to Domestic U.S. Customers.
-
Large Cr-Free Grinding Vial Set
SPEX SamplePrepFor grinding electronic components to test for chromium under RoHS/WEEE directives. Cr-free ASTM 06 steel impactor and end plugs, polycarbonate center cylinder (6801C). Will not add Cr like stainless steel components of 6801 vial. Set includes one complete vial plus three extra cylinders. Sample…
-
Cryo-Blocks for Cryogenic Grinding in the Geno/Grinder®
SPEX SamplePrepCryo-Blocks are made of aluminum. They hold and chill titer plates and vials to grind plant and animal tissue for nucleic acid and protein extractions. Cryo-blocks can be quickly chilled in the 2600 Cryo-Station, and will keep samples cold during grinding to preserve RNA and proteins from heat…
-
50mL Polycarbonate Cryogenic Vials w/Screw-On Cap
SPEX SamplePrepPolycarbonate vial with screw-on cap, 1 1/8 in. diameter x 4 ½ in. (2.9 cm x 11.4 cm). Holds grinding media up to 1/2 in. Fits 2196-16-PE Holder and 2664 Cryo-Block. Grinding load per vial 20 mL. Sold as a pack of 48 Vials with 48 caps (2253C).
-
Frosted Polyethylene Vial
SPEX SamplePrepFrosted polyethylene vial with screw-on polyethylene cap. The nominal outer diameter measures 1/2-inch x 2-inch long (12.7 mm x 50.8 mm). Holds one 3/8-inch (9.5 mm) stainless steel grinding ball (#2155). May be used with the Cryo-Block (#2663) and the vial holder (#2191). Grinding load per vial is…
-
Cryogenic Gloves
SPEX SamplePrepThese cryogenic gloves are designed to protect the hands and arms from the hazards associated with ultra-cold materials. Highly recommended when operating the 6770 and 6870 Freezer/Mills. These multi-layer-insulated gloves are lightweight and flexible, allow excellent dexterity, and are comfortable…
-
Large Grinding Vial Set
SPEX SamplePrepLarge Grinding Vial Set: Set includes stainless steel impactor and two end plugs, plus four polycarbonate center cylinders (6801C4). Makes one complete vial plus three spare center sections. Transparent plastic allows visual check of grinding progress. Sample capacity up to 50 mL. Vial Rack…
-
Mid-Size Poly-Vial Grinding Vial Set
SPEX SamplePrepFor grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonateencapsulated steel. Vial set includes one complete vial plus three extra center cylinders. Sample capacity up to 25 mL. Must be used with 6884 and 6886 Adapters.
-
Cole-Parmer CG-900 Cryo-Blade™ Cryogenic Grinder
SPEX SamplePrepThe Cryo-Blade™ is an ultra high-capacity cryogenic grinder for sample preparation and processing of up to 1 kg of sample. The Cryo-Blade automatically dispenses liquid nitrogen to allow the sample to reach cryogenic temperatures and then activates a grinding phase to pulverize samples,…
-
Small Polycarbonate Center Cylinders for 6751, 6761, and 6771
SPEX SamplePrepFor 6751 vial set; sold in units of 4. Also sold in units of 20. Polycarbonate is durable but should be cleaned with hot water and detergent, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.
-
Small Cr-Free Grinding Vial Set
SPEX SamplePrepFor RoHS/WEEE testing of electronic components for chromium. End plugs and impactor are Cr-free ASTM 06 steel. Will not add Cr to sample like stainless steel components of 6751 Vial. Set includes three extra 6751C cylinders. Sample capacity 0.5 to 4.0 mL.
-
Small Poly-Vial Grinding Vial Set
SPEX SamplePrepFor grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonate-encapsulated steel. Set includes one complete vial plus three spare center sections. Sample capacity 0.5 mL to 4.0 mL
-
Vial Sets and Balls
SPEX SamplePrepSteel Ball Set, 2 x 1/2 in & 4 x 1/4 in: Two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) steel balls for SPEX SamplePrep 8001 and 8009 Vial Sets. Polystyrene Vial w/Screw-On Cap: For wet or dry mixing of liquids and powders. Vial size 21/8 in. (5.4 cm) diameter x 21/2 in. (6.7 cm)…
-
Carver Hydraulic Laboratory Pellet Presses
SPEX SamplePrep3621 Carver® Model C: Full-size 12-ton (10.9 metric ton) Carver hydraulic laboratory pellet press that accepts 13 mm, 31 mm, 35 mm, and 40 mm pellet die sets. Manually controlled. Ideal for pressing sample pellets for XRF, IR, and other analytical techniques. Typical samples include cement,…
-
Accessory Packages for the 6870 SPEX SamplePrep Freezer/Mill®
SPEX SamplePrepEach 6870 Freezer/Mill® is supplied with your choice of 6870L Large Vial Accessory Package or 6870S Small Vial Accessory Package. The 6870 Freezer/Mill® can hold up to four small vials* (6751, 6761, 6771) or one mid-size vial (6881, 6883, 6885) The Accessory Package for mid-size vials must…
-
Grinding Containers and Accessories
SPEX SamplePrepHardened Steel Grinding Container: Grinding container with puck, dish, and lid made of 52-100 hardened tool steel. 6.9 in. diameter x 2.9 in. high, 17.5 lbs. (17.5 cm x 7.5 cm, 8 kg). Nominal volume 340 mL, recommended grinding load 20-50 mL. Includes puck, ring, dish with Oring gasket, and lid. …
-
Reinforced Polypropylene Microfuge Tube
SPEX SamplePrep2 mL reinforced polypropylene, self standing microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64-inch x 1 27/32-inch long (10 mm x 47 mm). Grinding load per tube 60-120 mg, mixing load 1 mL. Sold in package of 200. Vials can be filled and sealed individually…
-
Mid-Size Cr-Free Grinding Vial Set
SPEX SamplePrepMid-Size Cr-Free Grinding Vial Set: For grinding electronic components to test for chromium under RoHS/WEEE directives. Cr-free ASTM 06 steel impactor and end plugs, polycarbonate center cylinder (6881C). Vial set consists of one complete vial and three spare cylinders. Sample capacity up to 25…
-
Large Polycarbonate Center Cylinders for 6801 and 6871
SPEX SamplePrepFor 6801 and 6871 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. Sold in units of 4. NOTE: These products are only available for sale to Domestic U.S. Customers.
-
8000D Mixer/Mill®
SPEX SamplePrepHigh-energy ball mill with dual clamps that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst…
-
Kapton® Window Film
SPEX SamplePrepKapton® thin window film for XRF liquid sample cups. 0.3 mil (8µm) thick. Supplied as continuous roll 2-7/8 in. (73 mm) wide, 50 ft. (15 m) long. FEATURES Often considered the closest thing to a “bombproof” XRF window film Incredibly strong and heat resistant…
-
Grinding Balls and Accessories for Geno/Grinder
SPEX SamplePrep2100 Grinding Ball Dispenser: Simultaneously dispenses one 5/32 in. (4 mm) steel grinding ball (2150) into each well of a standard 96-well titer plate, including 2200 and 2210 titer plates. 2110M 24-Pin Magnet: 24 magnet-tipped pins on plate with handle. Inserts or removes 3/8 in. (9.5 mm)…
-
Polyethylene Vials with Caps
SPEX SamplePrepPolystyrene Vial w/Slip-On Cap, 3/4 x 2 in.: 3/4 in. (19.1 mm) diameter x 2 in. (50.8 mm) long. Includes slip-on polyethylene cap. Volume 12 mL; mixing load approximately 5 mL. Accepts SPEX SamplePrep 3112, 3119, or 8006A methacrylate balls. Sold in units of 100. Polycarbonate Vial w/SlipOn…
-
8000M Mixer/Mill
SPEX SamplePrepHigh-energy ball mill that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst supports, glass,…
-
Pellet Die Sets and Accessories
SPEX SamplePrep13 mm Die Set: Used to form KBr disks for IR analysis. Set includes evacuable die body, base, plunger, two 13 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disk extraction. Load limit 10 tons (9.1 metric tons); weight 2.2 lbs (1 kg). 40 mm Die Set: To form 40…
-
Cryoplate
SPEX SamplePrepThe Cryoplate keeps sample lids cold during the grinding process. Used with the Cryo-Block or Cryo-Adapter (#2650) for titer plates. The Kryo-Tech accessories are used to chill samples to cryogenic temperature and to maintain temperature during grinding in the Geno/Grinder.
-
Zirconium Beads
SPEX SamplePrepAcid washed grinding beads are treated to remove fine particles and contaminants. Sold in package of 100.
-
Mid-Size Grinding Vial Set
SPEX SamplePrepGrinding vial intermediate in size between 6751 and 6801: sample capacity up to 25 mL. Stainless steel end plugs and impactor, polycarbonate center cylinder (6881C). Set includes one complete vial plus three extra cylinders. Must be used with 6884 and 6886 Adapters.
-
8000D Mixer/Mill® Accessories
SPEX SamplePrepMultiple Sample Adapter for Seven 1/2 Inch Vials: Holds seven vials, each 1/2 in. (12.7 mm) in diameter, for simultaneous running in 8000M Mixer/Mill®. Suitable vials include SPEX SamplePrep 3111, 3114, 3116 and 3117. Vials run at one time should be same length. Can be used in 8000D…
-
Cap-Mat Sealing Mat
SPEX SamplePrepSquare well sealing mat specifically designed for the 2205 96-Well Reinforced Titer Plate. Sold in package of 50.
-
Small Grinding Vials Accessories
SPEX SamplePrepExtractor/Vial Opener for Small Grinding Vials: The Extractor/Vial Opener lifts 6700-series vials in and out of the Freezer/Mill, and is used to remove the vial end plugs from the center section. One 6754 is supplied with each 6770 Freezer/Mill and as part of the 6870S Accessory Package. …