Grinding vial intermediate in size between 6751 and 6801: sample capacity up to 25 mL. Stainless steel end plugs and impactor, polycarbonate center cylinder (6881C). Set includes one complete vial plus three extra cylinders. Must be used with 6884 and 6886 Adapters.

3621 Carver® Model C: Full-size 12-ton (10.9 metric ton) Carver hydraulic laboratory pellet press that accepts 13 mm, 31 mm, 35 mm, and 40 mm pellet die sets. Manually controlled. Ideal for pressing sample pellets for XRF, IR, and other analytical techniques. Typical samples include cement,…

High-energy ball mill that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst supports, glass,…

For 6751 vial set; sold in units of 4. Also sold in units of 20. Polycarbonate is durable but should be cleaned with hot water and detergent, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.

2190 Vial Rack : Holds 24 3116PC vials, 24 2241-PC vials, or 24 2241-PE vials. All three vials hold a single 3/8 in. (9.5 mm) steel grinding ball 2195 Large Capacity Clamp Assembly : An oversize clamp that will hold centrifuge tubes or a double load of titer plates. Designed to hold twelve…

A holding station for samples which must be kept chilled to preserve RNA for extraction. The insulated outer jacket of the Cryo-Station is chilled with liquid nitrogen and can be filled automatically or manually. Two titer plates can be placed in the Cryo-Station well to be filled and kept cold.…

Large Grinding Vial Set: Set includes stainless steel impactor and two end plugs, plus four polycarbonate center cylinders (6801C4). Makes one complete vial plus three spare center sections. Transparent plastic allows visual check of grinding progress. Sample capacity up to 50 mL. Vial Rack…

Polycarbonate vial with screw-on cap, 1 1/8 in. diameter x 4 ½ in. (2.9 cm x 11.4 cm). Holds grinding media up to 1/2 in. Fits 2196-16-PE Holder and 2664 Cryo-Block. Grinding load per vial 20 mL. Sold as a pack of 48 Vials with 48 caps (2253C).

The 1600 MiniG® is the ideal solution for labs that want a compact yet powerful tissue homogenizer. This mechanical disruptor is designed to effectively disrupt cellular materials by oscillating one or two deep-well titer plates vertically. Clamp typically holds up to 6 x50 mL vials or 48 x 2…

Multiple Sample Adapter for Seven 1/2 Inch Vials: Holds seven vials, each 1/2 in. (12.7 mm) in diameter, for simultaneous running in 8000M Mixer/Mill®. Suitable vials include SPEX SamplePrep 3111, 3114, 3116 and 3117. Vials run at one time should be same length. Can be used in 8000D…

For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonateencapsulated steel. Vial set includes one complete vial plus three extra center cylinders. Sample capacity up to 25 mL. Must be used with 6884 and 6886 Adapters.

Thick, rugged foam block holds 48 standard 5 mL or 4 mL centrifuge vials. Used with polycarbonate and frosted polyethylene vials (#2241-PEF-200, #2241-PC). The holders are designed to hold vials securely in place on the Geno/Grinder during processing. They are lightweight and can also be used on…

For grinding electronic components to test for chromium under RoHS/WEEE directives. Cr-free ASTM 06 steel impactor and end plugs, polycarbonate center cylinder (6801C). Will not add Cr like stainless steel components of 6801 vial. Set includes one complete vial plus three extra cylinders. Sample…

2100 Grinding Ball Dispenser: Simultaneously dispenses one 5/32 in. (4 mm) steel grinding ball (2150) into each well of a standard 96-well titer plate, including 2200 and 2210 titer plates. 2110M 24-Pin Magnet: 24 magnet-tipped pins on plate with handle. Inserts or removes 3/8 in. (9.5 mm)…

Small Stainless Steel Center Cylinder For 6751 vial set. Replaces 6751C when sample contact with plastic is not advised. Made of nonmagnetic stainless steel.

Deep-well reinforced titer plate with a 96-well format. Each square well has a volume of 1.4 mL and a working volume of 1.0 mL. Compatible with our 2010 Geno/Grinder due to the toughened wells that withstand bead beating. This plate can also be used with the 1600 MiniG.

Steel Ball Set, 2 x 1/2 in & 4 x 1/4 in: Two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) steel balls for SPEX SamplePrep 8001 and 8009 Vial Sets. Polystyrene Vial w/Screw-On Cap: For wet or dry mixing of liquids and powders. Vial size 21/8 in. (5.4 cm) diameter x 21/2 in. (6.7 cm)…

For 6881, 6883, and 6885 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.

Microvial Set: Three 6753V Microvials with holder. Each 6753V has stainless steel end plugs, center cylinder and impactor. Holder contains three 6753V Microvials for simultaneous operation. Sample capacity 0.1 – 0.5 mL each. Microvial Sample Extraction Tool: For removing ground…

High-energy ball mill with dual clamps that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst…

PrepAid Propylene Glycol - (C3H8O2) (1224F31): Liquid grinding aid, 25 grams (approximately 24 mL) in dropper bottle. Instructions included. PrepAid Cellulose Binder - (C6H10O5)n (1224F32, F33): = 20 µm powder, 150 g bottle. Can be blended with sample at 10% by weight to form XRF…

The Cryoplate keeps sample lids cold during the grinding process. Used with the Cryo-Block or Cryo-Adapter (#2650) for titer plates. The Kryo-Tech accessories are used to chill samples to cryogenic temperature and to maintain temperature during grinding in the Geno/Grinder.

Frosted polyethylene vial with screw-on polyethylene cap. The nominal outer diameter measures 1/2-inch x 2-inch long (12.7 mm x 50.8 mm). Holds one 3/8-inch (9.5 mm) stainless steel grinding ball (#2155). May be used with the Cryo-Block (#2663) and the vial holder (#2191). Grinding load per vial is…

Vial sets are an alternative to titer plates. These vial sets are pre-cleaned with grinding balls included. They come in sturdy carriers that have about the same footprint and height as deep-well titer plates, and fit the Geno/Grinder Clamp. Vials can be filled and sealed individually, and the…

Disposable closed X-ray cell with collar used throughout theworld for fast, dependable, reproducible running of liquidsamples in XRF spectrometers. Includes a polyethylene snap-ringand cup with snap-post vent and reservoir. Requires thin windowfilm. Sold in bags of 100. Features …

13 mm Die Set: Used to form KBr disks for IR analysis. Set includes evacuable die body, base, plunger, two 13 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disk extraction. Load limit 10 tons (9.1 metric tons); weight 2.2 lbs (1 kg). 40 mm Die Set: To form 40…

2 mL reinforced polypropylene, self standing microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64-inch x 1 27/32-inch long (10 mm x 47 mm). Grinding load per tube 60-120 mg, mixing load 1 mL. Sold in package of 200. Vials can be filled and sealed individually…

Hardened Steel Grinding Container: Grinding container with puck, dish, and lid made of 52-100 hardened tool steel. 6.9 in. diameter x 2.9 in. high, 17.5 lbs. (17.5 cm x 7.5 cm, 8 kg). Nominal volume 340 mL, recommended grinding load 20-50 mL. Includes puck, ring, dish with Oring gasket, and lid. …

The 6875D Freezer/Mill® is a high-throughput, dual chamber cryogenic grinder with a self-contained liquid nitrogen tub and insulated case. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. This mill…

Kapton® thin window film for XRF liquid sample cups. 0.3 mil (8µm) thick. Supplied as continuous roll 2-7/8 in. (73 mm) wide, 50 ft. (15 m) long. FEATURES Often considered the closest thing to a “bombproof” XRF window film Incredibly strong and heat resistant…

Cryogenic Dewar designed for storing and dispensing small amounts of liquid nitrogen. Sturdy, aluminum, five-wheel roller base makes moving dewar from room to room safe and easy. Includes liquid withdraw device for dispensing liquid nitrogen directly into the Freezer/Mill at rates up to 8 liters…

Molecular Biology Grade Grinding Beads are treated to inactivate contaminating enzymes and have been tested accordingly. Low Binding Grinding Beads are coated to reduce non-specific binding of nucleic acids and proteins and are used for lysing dilute samples of cells. Acid Washed Grinding Beads are…