The SCS tester containing a foot plate and a stand, is mainly used for footwear and wrist strap grounding. It is designed with stainless steel test button which ensures durability and long lasting usage.

Complies with Revision B of JEDEC J-STD-033. 5%, 10%, 60%

Monitors the widest humidity range. 6 Spot

When you need maximum dryness during transportation and storage of your sensitive SMDs, add desiccants to your vacuum-sealed package. Desiccant works by absorbing airborne moisture left inside the bag after vacuum sealing, and captures moisture that manages to pass through the bag material. Secure…

Replacement air filters for use with TM980 ionized air gun.

This is an add-on sensor only for already purchased EM EYE with different sensors. Detects and measures ESD events.

120 Volt Vacuum. Designed for high efficiency cleanup of most business equipment. Portability, quick setup and efficient safe operation are key features of this powerful unit. Comes complete with a Type 2 filter, detachable power cord, stretch hose.

Dissipative blue rubber does not mark floors.

Protect your products by notifying staff and visitors that static control precautions are needed. ESD Aisle Marking Tape allows you to establish the areas requiring static protective measures. This 6 mil, scuff-resistant tape features the ESD Warning Symbol and message. Bright yellow background…

Benchtop Air Ionizer, Including Ionizer, Operator's Manual, And Power Transformer; 100 Vac-240 Vac

The SCS wrist strap input jack is suitable for use with 724 workstation monitor unit. It is made of high quality material, which ensures durability and long lasting usage. It is easy to install and convenient to use.

Higher collection capacity than other vacuum systems Plastic encased filter eliminates spillage and simplifies removal Larger capacity requires replacing less often HEPA media traps extremely fine particles For use on laser printer using toners and highly-sensitive equipment

Displays warning symbol and message in strict accordance with the new Military standard. These 3M™ Labels are easy to use and provide the ESD symbol and warning message needed to complete your protective package. These destructible type labels are "tamper evident", letting…

The SCS foot grounder is used for maintaining body to ground connection. It is mainly used for ESD sensitive electronic devices. This grounder with D-ring, elastic hook and loop strap is easy to install.

The SCS 15 Feet floor ground cord with 10 mm snap, ensures electrical connection of people and other conductors to ground connection, within ESD protected area. It is made of high quality material which ensures durability and long lasting usage.

The SCS anti-fatigue rubber mat measuring 3 Feet x 5 Feet, is mainly used for ESD sensitive electronic devices. It is made of high quality rubber material, which ensures durability and long lasting usage.

The 3M Mini Air Ionizer 960 Is A Small And Versatile Blower Available For Equipment Or Local Area Ionization. Its Small Size Makes It Ideal For Use In Those Situations Where Space Is At A Minimum.  

Common point ground cord connects two wrist straps and a work surface mat to ground. Low profile design features holes for permanent mounting to a bench. Comes with 15ft. cord, 3/8" stud snap with 1M‰ã_ resistor for mat connection and ring terminal to bulilding ground.

The SCS rectangle mat roll kit measuring 3 Feet x 50 Feet, is mainly used for ESD sensitive electronic devices. It is made of high quality 3-layer vinyl material, which ensures durability and long lasting usage.

The SCS 2300 series dual conductor coil cord with 3.4 mm straight mono plug, offers static discharge shielding for ESD sensitive electronic devices. It is made of sturdy material, which ensures durability and long lasting usage. If one conductor is damaged, the operator will maintain the…

Snap fastener, female, 10 mm diameter. For 3M table and floor mats and runners 8200 Series.

The SCS metal wristband ensures electrical connection of people and other conductors to ground connection, within ESD protected area. This wrist band with dual wire conductors and 3.4 mm plug, is made of high quality material which ensures durability and long lasting usage. Premium metal…

The SCS large metal wristband ensures electrical connection of people and other conductors to ground connection, within ESD protected area. This wrist band with dual wire conductors and 3.4 mm plug, is made of high quality material which ensures durability and long lasting usage.

This Pres-N-Snap™ tool is easy to use and is made in the USA. Capable of setting numerous brands of fasteners simply by changing the dies Heat-treated cast aluminum construction Lightweight and durable allows for one-handed operation

The SCS work surface matting measuring 100 Feet x 2 Feet, is mainly used for ESD sensitive electronic devices. It is made of high quality 3-layer vinyl material, which ensures durability and long lasting usage.

The SCS 2381 series metal wristband ensures electrical connection of people and other conductors to ground connection, within ESD protected area. This wrist band with dual wire conductors and 3.4 mm plug, is made of high quality material which ensures durability and long lasting usage. Premium…

The SCS rectangle mat roll kit measuring 2 Feet x 24 Feet, is mainly used for ESD sensitive electronic devices. It is made of high quality 3-layer vinyl material, which ensures durability and long lasting usage.

The SCS heel grounder with dual cup, is used for maintaining body to ground connection. It is mainly used for ESD sensitive electronic devices. This grounder with elastic hook and loop nylon strap and is easy to install.

Higher collection capacity than other vacuum systems Plastic encased to eliminate spillage and simplify removal Larger capacity requires replacing less often Removes toner from copiers, laser printers and other office equipmen

The SCS work surface matting measuring 24 Feet x 50 Feet, is mainly used for ESD sensitive electronic devices. It is made of high quality 3-layer vinyl material, which ensures durability and long lasting usage.

The SCS 5 Feet dual conductor coiled cord offers static discharge shielding for ESD sensitive electronic devices. It is made of sturdy material, which ensures durability and long lasting usage.

The 3M Adjustable Wrist Straps 4600 Series feature a thermoplastic band with an integrally molded conductive interior. The wrist strap utilizes easy on/easy off adjustable zipper style latching.