The LaMotte 0 - 15 ppm ColorQ nitrate TesTabs are suitable for use with ColorQ and ColorQ 2x test kits. They are mainly used in research facilities and chemical laboratories to conduct wide range of experiments. They are easy and convenient to use.

Strips chemically treated with starch and cadmium iodide measure total chlorine to determine the strength of sanitizers in cleaning solutions. Furnished in plastic vial of 200 1/4” x 3 1/2” strips, with color comparison chart, which has three standards 50, 100 and 200 ppm

Octet Comparator Method For determining aluminum in water Sufficient for 50 tests Octet Comparator has color standards representing 0, 0.1, 0.15, 0.2, 0.25, 0.3, 0.4 and 0.5 ppm. A pink to red color will form when aluminum reacts with Eriochrome Cyanine R, at pH 6.

Drop Count Method For determining sulfite in water Employs modified APHA Method 428 One drop equals 5 ppm SO₃ Sufficient for 50 tests at 100 ppm

The LaMotte model CC-PS reagent refill sulfide test kit is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is easy to handle and convenient to use.

Direct Reading Titrator Method (9859A70 and A71) For determining total (T) alkalinity in water Range of 0 to 200 ppm as CaCO₃ in 4 ppm increments Employs APHA Method 403. Sufficient for 50 tests at 200 ppm. Direct Reading Titrator (9859B10) For determining phenolphthalein (P)…

The LaMotte phosphate reagent refill is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is easy to handle and convenient to use.

This kit tests for Sodium Nitrite using the Direct Reading Titrator method. Applications: Industrial Water Boiling and Cooling, Water and Wastewater Range/sensitivity is 0-1000 ppm/20 ppm NaNO₂

The LaMotte DPD #1 free chlorine reagent tablet is compatible for use with calorimeter. It is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is easy to handle and convenient to use.

This LaMotte Phosphate test kit tests for low range Phosphate using the LRC Comparator. Range and sensitivity is 0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 ppm PO43-. Applications: Environmental Education

Direct Reading Titrator, Syringe Type For use in LaMotte field titration kits as well as in standard laboratory procedures such as dilutions and solution dispensing Plunger and barrel of propionate plastic; barrel has Luer slip tip Capacity 1 mL   All-purpose…

3119 Octet Comparator Method Color standards for 0.2, 0.4, 0.6 and 1.0 ppm NO₃—N Color standards for 0.2, 0.4, 0.6 and 1.0 ppm PO₄ Sufficient for 40-50 tests 

Low Range, 0-2500 ppb. 25 test strips.

Kit Contains: 100 Chlorine DPD #1 Tablets 50 Phenol Red Tablets 3 Test Tubes, 2.5, 5, 10 mL, plastic w/ caps 1 Chlorine/Bromine Octa-Slide 2 Bar 1 Phenol Red Octa-Slide 2 Bar, pH 6.8-8.2 1 Octa-Slide 2 Viewer

A complete outfit for pond fish culture, ideal for fresh water analysis. Nine critical test factors can be efficiently and accurately determined on-site. Designed with field analysis as a priority; all reagents, components and accessories are arranged in pre-drilled ethafoam. Short form…

4790 OctaSlide Comparator For determining Diethylhydroxylamine (DEHA) concentrations by way of iron reduction method Octa-Slide comparator provides 8 standards between 0.05-1.5 ppm Three reagents perform 100 tests

DPD Tablet Octa-Slide (9859G42) Sufficient for 50 tests Employs DPD tablet method: EPA- accepted method for NPDWR Octa-Slide has color standards representing 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 and 3.0 ppm Cl Low Range Octet Comparator (9859H10) Employs DPD tablet…

The hydrogen peroxide equivalence is 1 drop = 50 ppm. The peracetic acid equivalence can be modified to test different concentrations by using a different sample size. The result is a 1 drop = 6, 15, or 300 ppm equivalence.

4507 Drop Count Method For determining anionic forms of detergent One drop equals 1.0 ppm detergents; range approximately 0 to 5.0 ppm Sufficient for 60 tests at 5.0 ppm

The LaMotte DPD chlorine secondary standard kit is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.

No color matching, no look up charts, no guessing! The unique, multi-test ColorQ pool and spa hand-held photometer reads SEVEN test factors (Free Chlorine, Total Chlorine, Bromine, pH, Alkalinity, Calcium Hardness, and Cyanuric Acid) directly on a digital display. Featuring an innovative…

The New Dual Range QAC Test Strip takes care of ALL of your testing needs on ONE STRIP! Whether checking the concentration of your QAC solution or checking to ensure complete removal from treated surfaces, the new Dual Range QAC Test Strip DOES IT ALL! Chemically-treated test strips change…

The LaMotte Stormwater MS4 Kit has instrumentation and reagent systems to provide a preliminary screening of stormwater outflow, and to determine whether it is contributing to the overall pollutant load from precipitation events. Meets guidance as set forth by USEPA. Features …

7831 Octet Comparator Sufficient for 50 tests Tungstophosphoric and molybdophosphoric acids are reduced by tannins and lignins to form a blue color. Octet Comparator has color standards representing 1, 2, 3, 4, 5, 6, 8 and 10 ppm Tannin or lignin-like substances.

Insta-Test® strips are available to perform checks for water quality factors. Test strips are a quick way to monitor water without having to use reagents.

The Iodine test papers are a convenient way to test Iodine in water with fast results. Range and sensitivity is 0, 30, 60, 120, 180 ppm.

Yes/No qualitative test Sensitivity less than 2.2 per 100 mL of sample No incubation equipment required; only room temperature

All the benefits of DPD tablets in a liquid Can be used with existing LaMotte chlorine comparators or colorimeters Lower cost per test than tablets Quicker results and clearer colors than tablets DPD 1A and 1B reagents are added to a 5 or 10 mL sample to test free chlorine.…

Come in a 60 mL quantity, this performance check standard is for inspection and monitoring water quality.

Applications: Laundry and Sanitation This kit tests for caustic levels by adding drops of Barium Chloride solution to a sample where white precipitate will form if carbonates are present. Levels are then determined using the Phenolphthalein Indicator. Range and sensitivity is 1 drop = 0.1 or…

The LaMotte 0.04% pH bromothymol blue indicator solution is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.