Offers direct reading of Fluoride down to 0.1 ppm with Automatic Temperature Compensation (ATC) Fast response Fluoride meter ( Easy use for Field or Laboratory fluoride testing Small sample/TISAB volume required for testing In compliance with EPA Method 340.2 (Potentiometric Ion…

Tests 0-5 ppm Five intervals: 0, 0.5, 1, 3 and 5 50 strips per vial Unique range and sensitivity covers critical chlorine concentrations for many applications of food processing, water/wastewater treatment, education and other areas.

Potassium chloride solutions TDS values are based on a 0.7 conversion from conductivity. Solutions can be used to standardize conductivity meters.

Individual pads on a polystyrene strip. These are packaged in the PopTop vial which is molded with a desiccant liner for protection from moisture.

The LaMotte Stormwater MS4 Kit has instrumentation and reagent systems to provide a preliminary screening of stormwater outflow, and to determine whether it is contributing to the overall pollutant load from precipitation events. Meets guidance as set forth by USEPA. Features …

Rapid test procedures and laminated color charts give low/medium/high concentrations for nitrogen, phosphorus and potassium (15 tests each) A pH indicator and color chart cover the range pH 4.0-9.0 (30 tests). A garden guide manual and soil handbook interpret test results and give lime and…

For Environmental Studies For determining life-supporting chemistry of fresh-water environments, including ponds, lakes, streams, rivers and marshes Tests for: carbon dioxide, D.O., hardness, nitrate, trace phosphates, wide-range pH and silica Includes water sampling bottles, report forms and…

Photometer directly measures seven pool & spa tests which includes Free Chlorine, Total Chlorine, Bromine, pH, Alkalinity, Calcium Hardness and Cyanuric Acid. The photometer is easy to use and includes 100 TesTabs® tablet reagents per test factor packaged in blister-style foil. …

Kit Contains: 100 Chlorine DPD #1 Tablets 50 Phenol Red Tablets 3 Test Tubes, 2.5, 5, 10 mL, plastic w/ caps 1 Chlorine/Bromine Octa-Slide 2 Bar 1 Phenol Red Octa-Slide 2 Bar, pH 6.8-8.2 1 Octa-Slide 2 Viewer

Octa-Slide Comparator Tests total iron after any ferric iron is reduced to ferrous in the sample Sufficient for 90 tests Ferrous and ferric iron may be tested separately by eliminating the reduction step. Octa-Slide has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0…

3322 Octa-Slide Comparator System For determining total sulfide Sufficient for 50 tests NPDES-EPA accepted Unit uses the Pomeroy methylene blue method for analysis. Total sulfide is determined using a color dye, which is added to an un-reacted sample until it matches a reacted…

The Model SD Monitoring Kit was specifically designed and manufactured to meet US EPA requirements for field test procedures approved in the Federal Register (Volume 55, No. 217), to monitor illicit storm drain connections. Each unit includes tests for pH, Total Chlorine, Total Copper, Phenols,…

Automatic wavelength selection Wavelength accuracy of ±2 nm 5 nm bandpass Wide wavelength range and low stray light Menu driven The SMART Spectro Spectrometer has over 80 pre-programmed tests. Portable for use on the lab bench or field. Spectrophotometer includes 6…

Formula: Mixture

For determining potassium in natural waters and brine Turbidity tube is calibrated for 6, 8, 10, 20, 30, 40 and 50 ppm potassium Sufficient for 100 tests For replacement reagent, order 0534B49

3119 Octet Comparator Method Color standards for 0.2, 0.4, 0.6 and 1.0 ppm NO₃—N Color standards for 0.2, 0.4, 0.6 and 1.0 ppm PO₄ Sufficient for 40-50 tests 

The Low Range Manganese test kit measures Manganese levels at 0.05, 0.1, 0.2, 0.4, 0.6, 0.8 and 1.0 ppm using the Octa-Slide 2 Comparator.

4507 Drop Count Method For determining anionic forms of detergent One drop equals 1.0 ppm detergents; range approximately 0 to 5.0 ppm Sufficient for 60 tests at 5.0 ppm

3 ranges of PAA test strips available covering low (0-50 ppm), medium (0-160 ppm) and high (0- 1,000 ppm) range concentrations The Insta-Test® 3000 test strips determine peracetic acid concentrations from 0-160 ppm. The test has a 10 second development time. The container has a desiccant liner…

Formula: N₄O₁₂Th•4H₂O Formula Weight: 552.12 CAS Number: 13470-07-0

Direct Reading Titrator (9859K40 and K41) For determining high range chlorine in water Range of 0 to 200 ppm Cl₂ in 4 ppm increments Sufficient for 50 tests at 200 ppm. Uses Iodometric reagent method.

Automatic self-zeroing glass buret insures non-contamination Constructed of glass, 305 mm long With offset dispensing tip Graduated 0 to 10 mL in 0.1 mL increments Self-zeroing; overflow is returned to reservoir 2002A01 (LaMotte 0847) and A06 (LaMotte 0996) burets include 50 mL plastic…

Tests performed on liquid soil extract Reagents and labware mounted in foam-lined, removable shelves in a carrying case of ABS plastic Simplified field tests for available nutrients in agricultural soils permit early detection of nutrient deficiencies. Equipment determines 14 soil…

Octet Comparator For determining trace levels of free cyanide in water Octet comparator has color standards representing 0.00, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35 and 0.40 ppm Free CN - Sufficient for 50 tests  

This kit tests for Phosphate using the Octa-Slide 2 Comparator. Range is 1.0 - 10.0 ppm (PO₄) and 10 - 100 ppm (PO₄). Applications: Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater