Amber glass bottles ideal for UV light-sensitive liquid samples. Choice of closure and liner. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment.…

The dram/sample vials are available in clear or amber Type I borosilicate glass assembled with solid top or open hole black polypropylene screw thread closures. The solid top closures are lined with PTFE/F217 material and the open hole closures have PTFE faced silicone septa assembled in the…

Available in clear or amber borosilicate glass. Assembled with the solid top PTFE-Lined closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing treatment.…

Available in a wide assortment of colors. Designed for use with Shimadzu, Spectra-Physics, Varian and other autosamplers. Top Seal™ closure (2694D49 to D58) with a 0.010" molded septa allows for easy needle penetration and is inert to most solvents

Available in clear or amber borosilicate glass. Choice of closure and linter, including patented Top Hat™ liner system. Fixed (bonded) closures eliminate liner fallout.

Finneran 25mm Syringe Filters are available in 0.2um and 0.45 um pore size. Autoclavable.

Available in clear or amber borosilicate glass. Amber glass bottles ideal for UV light-sensitive liquid samples. Choice of closure and liner. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled…

Standard opening screw thread vials - 12 x 32 Type I borosilicate glass Clear or amber With or without marking areas Narrow opening allows use of 8-425 mm closures and septa. Designed to work in a variety of autosamplers. Marking areas make labeling and identification fast…

Push point insert tip design allows sample access down to 10µL Glass vials provide an inert solvent resistant environment for samples Assembled plate has excellent thermal stability and chemical resistance 700µL inserts assembled in the square well plate can be sealed with a…

F217 is a triple layer liner that consists of a foamed polyethylene core between two layers of virgin low-density polyethylene. The liner is faced with another layer of PTFE (polytetrafluoroethylene). The lined polypropylene closures have excellent chemical resistance, a low moisture transmission…

White polypropylene closure, PTFE lined. For  Boston Round Glass Bottles,  See  1204X96 -  1204Y17

Available in clear or amber borosilicate glass. Amber glass bottles ideal for UV light-sensitive liquid samples. Choice of closure and liner. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled…

12 x 32 Crimp Top Vials Type I Borosilicate Glass Clear or Amber 40% larger opening Increased target area helps prevent broken needles. Designed to work in Agilent (HP) and other autosamplers. Vial incorporates the unique StepVial design that precisely centers a limited…

FAST and EFFICIENT sample clean up Hold-up volume provides space in bottom of vial, portion of sample is not filtered. Various filter material and pore sizes available. Vial Size: 12mm x 32mm Sample Volume Size: <450μL Closure Type: 11mm Yellow Snap Cap Septa: Red…

Use with Snap Ring™ or Snap Seal™ vials Snap on and off easily No sharp aluminum edges 2686S94 through 2686T10 are Polypropylene GC Snap Top Caps. 2686T21 through T42 Snap Top Caps are for Shimadzu Autosamplers. All caps are 11 mm. Caps may be snapped on and off…

Preassembled with foamed polyethylene lined polypropylene closures. All HDPE bottles and jars are also available with PTFE-lined closures or unlined closures. Available in standard and precleaned in accordance wth recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with…

Wide Mouth Straight Sided Jars, Assembled with White Polypropylene Closure, Unlined.

Finneran 25mm Glass Fiber Robot Filters were developed specifically for automated sample filtration systems. Autoclavable.

Headspace vials and closures must form a tight seal for accurate analysis with reproducible results. Available in clear or amber Type I borosilicate glass with crimp or screw thread finishes. The vials are used to heat the sample until the concentration of the liquid and gas phases are in…

Designed to work in most standard autosamplers. Finneran polypropylene vials are lightweight, economical and have good chemical resistance. These limited volume vials provides maximum retrieval of contents. 12x32mm, 8-425mm Thread Choice of materials: Polypropylene is translucent,…

Mass Spec Vial Test Parameters include: Glass – Type 1, Class A, 33 Expansion Clear or Amber Borosilicate Dimension – Height, Diameter, Bottom Thickness, Neck Length, Thread Profile, Annealing Cap/Septum – Diameter, Height, Thread Integrity, Center Flash, Septa Insertion GC/MS…

Chromatrap gDNA removal columns can be used to eliminate gDNA as part of the RNA extraction process and are compatible with most RNA extraction methods.

Preassembled closures and septa come ready to use. Designed to work in Agilent or other robotic arm autosamplers.

PTFE sealing film has an adhesive free area around each well so plastic pipette tips and metal probes stay clean. Solvent-free adhesives adhere to polypropylene, polystyrene and polycarbonate materials PTFE film is compatible with aqueous solutions and organic solvents Excellent…

After the ampoule is cracked open, store the ampoule and it's contents in the 2mL Storage Vial Holder. The ampoule sits on the spring inside the vial. Seal the vial and ampoule with a stopper and closure.

Available in a wide assortment of colors. Designed for use with Waters, Shimadzu, Spectra-Physics, Varian and other autosamplers. The Top Seal™ closure with a 0.010" molded septa allows for easy needle penetration and is inert to most solvents. The one piece design saves time by…

Vial loader is fast and convenient for loading vials into the base plate. To use the Vial Loader: First, peel away the packaging and place an empty Base Plate on top of the vial loader Second, invert the entire unit and the plate is ready to use

12 x 32mm Vial with a 40% larger opening Available in Polypropylene, Clear Polypropylene and TPX Ideal for ion Chromatography, capillary electrophoresis, atomic absorption, pH sensitive samples, sodium and heavy metals analyses and aqueous samples Specifically designed to work in robotic…

Big mouth screw thread vials - 12 x 32 Type I borosilicate glass Clear or Amber 40% larger opening Broken needles can be prevented due to the larger target area. Incorporates unique StepVial design that precisely centers a limited volume insert in the vial neck. Marking and…

Type I borosilicate glass Clear or amber Accept a variety of seals The Snap Seal™ Vial can be securely sealed with the Poly Crimp™ Seal, an aluminum crimp seal or a variety of Snap Top Cap™ designs.  The unique design provides for a secure seal with any…