Eichrom Nickel Resin is available in one particle size (100-150 micron), in the bottle sizes shown below, prepackaged in slurry packed 2 mL columns, or dry pack 2 mL cartridges.

Eichrom UTEVA Resin is available in three particle sizes (100-150 mm, 50-100 mm, and 20-50 mm), in the bottle sizes shown below or prepackaged in slurry packed 2 mL columns and 2 mL dry pack cartridges.

Eichrom UTEVA Resin is available in three particle sizes (100-150 mm, 50-100 mm, and 20-50 mm), in the bottle sizes shown below or prepackaged in slurry packed 2 mL columns and 2 mL dry pack cartridges.

Eichrom Sr Resin is available in three particle sizes (100-150 mm, 50-100 mm, and 20-50 mm), in the bottle sizes shown below or prepackaged in slurry packed 2 mL columns and 2 mL dry pack cartridges.

Eichrom Pre-filter resin is available in two particle sizes (100-150 µm and 150-200 µm), in the bottle sizes shown below and ready to use in slurry packed 2 mL columns (for gravity flow) or dry packed 2 mL cartridges (for vacuum assisted flow).

The same columns used for our standard 2 mL pre-packed columns, these polypropylene columns have an inner diameter of 0.8cm and a snap off tip. Use when a slightly different sized column is required for the analysis. The columns are supplied in packages of 100, with 100 caps, bottom frit inserted…

Eichrom Ln Resin is available in three particle sizes (100-150 micron, 50-100 micron, and 20-50 micron), in the bottle sizes shown below or prepackaged in slurry packed 2mL columns and 2mL dry pack cartridges.

The Eichrom ag 1x 8 anion exchange resin is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: Preconcentration and Separation of Anions

Eichrom's TRU Resin is an extraction chromatographic material in which the extractant system is octylphenyl-N,N-di-isobutyl carbamoylphosphine oxide (abbreviated CMPO) dissolved in tri-n-butyl phosphate (TBP). The bed density of TRU Resin is approximately 0.37 g/mL, with a working capacity of 2 mg…

One of the more versatile of Eichrom's analytical products is TEVA Resin. It has been applied on a routine basis to the analysis of technetium, the measurement of the tetravalent actinides, and the separation of americium from lanthanides. It is used alone or can be readily combined with other…

Eichrom Nickel Resin is available in one particle size (100-150 micron), in the bottle sizes shown below, prepackaged in slurry packed 2 mL columns, or dry pack 2 mL cartridges.

Eichrom UTEVA Resin is available in three particle sizes (100-150 mm, 50-100 mm, and 20-50 mm), in the bottle sizes shown below or prepackaged in slurry packed 2 mL columns and 2 mL dry pack cartridges.

Eichrom’s disposable funnel units come preloaded with our Resolve® filters for alpha spectrometry source preparation. Like the Resolve filters, the funnel units are designed to maximize analyte recovery and the resolution of the filter. These units are disposable, therefore eliminating the…

Eichrom Ln Resin is available in three particle sizes (100-150 micron, 50-100 micron, and 20-50 micron), in the bottle sizes shown below or prepackaged in slurry packed 2mL columns and 2mL dry pack cartridges.

Eichrom’s DGA Resins are extraction chromatographic materials in which the extractant system is either N,N,N’,N’-tetra-n-octyldiglycolamide (DGA Resin, Normal) or N,N,N’,N’-tetrakis-2-éthylhexyldiglycolamide (DGA Resin, Branched). The bed density of both DGA Resins is approximately 0.38 g/mL, with…

Eichrom UTEVA Resin is available in three particle sizes (100-150 mm, 50-100 mm, and 20-50 mm), in the bottle sizes shown below or prepackaged in slurry packed 2 mL columns and 2 mL dry pack cartridges.

Eichrom TEVA Resin is available in three particle sizes (100-150 mm, 50-100 mm, and 20-50 mm), in the bottle sizes shown below or prepackaged in slurry packed 2 mL columns, 2 mL dry pack cartridges, and 47 mm discs.

Eichrom TEVA Resin is available in three particle sizes (100-150 mm, 50-100 mm, and 20-50 mm), in the bottle sizes shown below or prepackaged in slurry packed 2 mL columns, 2 mL dry pack cartridges, and 47 mm discs.

The extractant system in Eichrom's Sr Resin is 1.0M 4,4'(5')-di-t-butylcyclohexano 18-crown-6 (crown ether) in 1-octanol.A 40% (w/w) loading of this organic solution is loaded onto an inert chromatographic support. The bed density of Sr Resin is approximately 0.35 g/mL.

These disposable tubes and tips are used to connect the cartridge(s) used to the vacuum box. The white inner tip should be replaced and discarded between rinse and elution steps to avoid cross contamination of different fractions. Both the inner tubes and outer tips are available in packages of 1000.

Eichrom’s Resolve filters for alpha spectrometry source preparation are designed to meet the radiochemist’s needs for retaining analytes in a way that results in superior alpha spectral resolution. Ongoing customer-reported resolution concerns indicated that manufacturing specifications did not…

Eichrom actinide resin is available in two particle sizes (50-100 mm and 100-150 mm), in the bottle sizes shown below, prepackaged in slurry packed 2 mL columns or dry packed 2 mL Cartridges (for use with vacuum systems).

The Eichrom cartridge reservoir is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is made of high quality material which ensures long lasting usage. It is easy to handle and convenient to use.

Eichrom TRU Resin is available in three particle sizes (100-150 mm, 50-100 mm, and 20-50 mm), in the bottle sizes shown below or prepackaged in slurry packed 2 mL columns and 2 mL dry pack cartridges.

This 24 hole vacuum box has a high density polyethylene (HDPE) top for acid compatibility and a clear plastic bottom for visibility of collection tubes. Overall dimensions are 57 cm (long) x 14.5 cm (deep) x 18 cm (high.) The box comes complete with a screw in vacuum gauge, a rack insert which…

These columns, nominally 20mL, have an inner diameter of 1.5 cm and a "packable" volume of 17mL. Use them when a large bed volume of one of Eichrom's extraction chromatography or ion exchange resins is required. Columns are supplied with bottom frit pre-inserted, in packages of 20,…

Eichrom's DGA Resins are available in one particle size (50-100 micron), in the bottle sizes shown below and 2mL dry pack cartridges. Contact Eichrom for availability of other cartridge sizes.

Eichrom TEVA Resin is available in three particle sizes (100-150 mm, 50-100 mm, and 20-50 mm), in the bottle sizes shown below or prepackaged in slurry packed 2 mL columns, 2 mL dry pack cartridges, and 47 mm discs.

Eichrom TEVA Resin is available in three particle sizes (100-150 mm, 50-100 mm, and 20-50 mm), in the bottle sizes shown below or prepackaged in slurry packed 2 mL columns, 2 mL dry pack cartridges, and 47 mm discs.

Eichrom's RE Resin is available in three particle sizes (100-150 um, 50-100 um, and 20-50 um), in the bottle sizes shown below and ready to use in slurry packed 2 mL columns (for gravity flow) or dry packed 2 mL cartridges (for use with vacuum system).

Eichrom Sr Resin is available in three particle sizes (100-150 mm, 50-100 mm, and 20-50 mm), in the bottle sizes shown below or prepackaged in slurry packed 2 mL columns and 2 mL dry pack cartridges.