Round dipping baskets. Polypropylene. Supplied with sturdy swinging handle-a unique feature allowing easy storage and loading. All have perforated bottoms.  Polypropylene fabricated dipping baskets withstands 180°F on a continuous basis or up to 200°F for shorter periods. Excellent…

Standard taper size reusable Teflon joint sleeves. Unique manufacturing process permits superior quality Teflon _® joint sleeves at unbelievably low prices. Price permits disposability! Elongated cones of micro-thin virgin PTFE film tapered to fit snugly around glass joints.…

Dippers. Totally inert and non-contaminating. Extendible screw-in shafts have a steel core for rigidity and are fully encapsulated in Polytetrafluoroethylene. The basic unit consists of a beaker with a single 24" (600mm) shaft.   Replacement Handle Polytetrafluoroethylene Dipper …

Low density polyethylene bottles with polyethylene dropper closure with captive cap. Supplied capped in shrink-wrapped packs of ten. Maximum temperature for low density polyethylene is 80°C.

"Mega Peg" drying boards and accessories. Fabricated of 1/2" polypropylene, these drying racks are perfect for the high volume laboratory. Supplied in two standard sizes but can be fabricated to fit any space requirement. Each board is supplied with the appropriate number of 5"…

This sturdy stand is fabricated of 3/8" clear  acrylic adding style and function to a normally wall mounted rack. The 4.5 lb stand includes all hardware needed to attach to the 5918-0000 drying rack and also comes with a 5' section of our 1085-0012 vinyl laboratory tubing. Further,…

Sterilizing Tote Boxes, molded of natural polypropylene. Suitable for food use. These tote boxes are chemically resistant to acids, alkalies, oils and detergents and will  not rust or corrode. Can be nested when stored. Available in three different colors: Natural, White or Gray. Gray Tote Box…

These LDPE buckets with easy pour spout are graduated internally in liters (TC-to contain). The steel bale handle of the buckets with spouts has a comfortable grip. Suitable for food and beverage products with good to excellent chemical resistance especially at room temperature. Use up to 80°C or…

Funnel Anti Splash 24 Oz. (1211A30) Product Dimensions (l x w x h) : 0x5.75x6.5in 240 ounce capacity low-density polyethylene funnels with Bronze mesh filter  feature an anti-splash ring that eliminates spilling of  liquids caused by the swirling action created when a…

White, opaque jars with tight-fitting lids Designed to simplify and standardize the handling and storage of specimens Excellent chemical resistance Cannot be attacked by formaldehyde, weak acids or bases. Resist freezing or boiling temperatures. Easily disposable but sturdy enough for reuse.

Stir Bar For Beaker 44 mm 100 mL (1212Y93) Product Dimensions (l x w x h) : 1.775x0.56x0in Stir Bar For Beaker 62 mm 250 mL (1212Y94) Product Dimensions (l x w x h) : 0x2.44x0in Stir Bar For Beaker 70 mm 500 mL (1212Y95) Product Dimensions (l x w x h) : 0x2.76x0in …

Tough 12 liter autoclavable polypropylene tray for a variety of uses. Can hold 18 x 500mL or 12 x 1 liter bottles. Tapered and stackable to save storage space. Product Dimensions (l x w x h): 20 x 13.8 x 4.1"

These stylish sloped shoulder wash bottles feature an acute angled "swan neck" dispensing spout. Maximum temperature of low-density polyethylene is 80°C. Washbottle 250 ML Water (1210A92 ) Product Dimensions (l x w x h) : 0x2.153x8.625in Printed with a water…

Cross head magnetic stir bars made of polytetrafluoroethylene. Greater mixing action at bottom, side, and top of container, even at low stirring speeds. No splashing, less noise. For test tubes, round bottom or flat bottom labware. Polytetrafluoroethylene resin with cross-shaped fins and…

Polypropylene Molded graduations - in liters Low form for added stability Autoclavable; use up to 135°C Autoclavable, highly translucent especially when filled with liquids. Permanent molded in graduations. Resistant. No drip spout. Thumb grip on handle.

Vinyl laboratory tubing with a wall thickness that is non-toxic, transparent and inert. This smooth and flexible tubing is chemical resistant with a specific gravity of 1.2 and a tensile strength of 2000 psi.  Our Vinyl Food Grade Tubing is designed for use in the laboratory with an elongation…

Permanent magnet sealed in shell with triangular cross-section

Graduated Square Bottle, Wide Mouth High-Density Polyethylene, Amber 2L ( 1212Y25 ) Product Dimensions (l x w x h) : 4.557x3.574x9.75in Amber graduated 2 liter rectangular bottle , high-density Polyethylene for easy storage of bottles on shelves. Enhanced stability when in use with an…

Stirring Vane For 16MM Tubes (1212Z74) Product Dimensions (l x w x h) : 0.517x0.478x0.497in Vane Bar. Polytetrafluoroethylene. Half Round for use in 16mm test tubes. Solid Polytetrafluoroethylene resin vanes with molded magnetic bars in center. Permit rotation in small conical tubes.…

Rack Hydrometer Polypropylene Tall ( 1212X17 ) Product Dimensions (l x w x h) : 7.812x8.5x10in 7 in plate height tall Hydrometer Racks. These 18 place polypropylene racks are specially designed to safeguard glass hydrometers. The three tiered rack with handles allows easy transport and…

Erlenmeyer flasks. Molded of chemically resistant, autoclavable polypropylene. Graduations are permanently molded into flask. The autoclavable polypropylene ribbed flask stand supports round bottom flasks that contain up to 10 liters.  May be stacked to save space or add height.…

Stir Bar Egg-Shaped 3/8X3/4" (1210D76 ) Product Dimensions (l x w x h) : 0.785x0.397x0.4in PTFE 20 mm length   Stir Bar Egg-Shaped 1/2X1" (1210D77 ) Product Dimensions (l x w x h) : 1x0.511x0.515in PTFE 25 mm length Stir Bar…

Unique combination of a pure Polytetrafluoroethylene body with a specially formulated stabilized Polytetrafluoroethylene Carbon base as a single molding. Totally inert pure polytetrafluoroethylene inner surface Heatable to 270°C without distortion Improved heat transfer Use…

Product Dimensions (l x w x h) : 6.75x6.75x7in Allows for safe storage of various racks, reagent bottles, and other vessels containing Beta-emitting isotopes. Safely guards against exposure to 3H, 14C, 35S and 32P. Cover has handle. Supplied with non-skid  feet and radiation hazard labels.

Translucent Pan Polypropylene Plus Lid (1211A54) Product Dimensions (l x w x h) : 6.937x6.437x5.937in Holding capacity 2.4 quarts Translucent Pan Polypropylene Plus Lid (1211A55) Product Dimensions (l x w x h) : 10.5x6.375x6in Holding capacity 3.9 quarts …

Product Dimensions (l x w x h) : 12x12x27in Introduced to be used in safety conscious laboratory  environments enabling staff to collect all  Non-Hazardous Laboratory Waste in one container. 6 disposal boxes per each case. Colorful easy to read graphics. Ships flat…

These racks are manufactured of clear acrylic shelves with white bases and sides. For typing, screening and other blood bank applications. For blood donor processing. Holds donor sample tubes as well as tubes for donor’s serum and cell suspension, ABO, Rh, antibody grouping and screening.

Product Dimensions (l x w x h) : 6.687x9.75x32.687in This heavy white edge rod stand polyethylene resistant stand weighs 5.5lbs. It comes with a polyethylene coated metal rod which screws into the base. Available with the hole in the center ( 1212W74 ) or at the short edge. The base…

Eye Wash Station Dimensions (l x w x h) : 11.75x4x11.75in First EYD Station. Emergency eye wash station with  integral eye wash bottle. This station is molded  of high-impact green polystyrene complete with polyethylene  eye wash bottle. The unique bottle is designed to…

Stir Bar Kit - 16 Bars Product Dimensions (l x w x h) : 7.38x3.94x1.28in Polytetrafluoroethylene Stirring Bar Kit. Kit contains: (2) each 5/16 x 1/2 (8 x 13mm), (2) each 3/8 x 2 (9.5 x 51mm), (2) each 5/16 x 5/8 (8 x 16mm), (2) each 3/8" x 2 1/2 (9.5 x 64mm),(2) each 3/8 x 1 (9.5 x…

Printed cylinders made of polymethylpentene. Cylinders feature permanently, easy to read blue screened graduations that resist fading and scratching after repeated autoclaving. Meets stringent international quality criteria according to ISO 6706 standards. Tolerances according to DIN 12 680 TT,…

Reliable filling of small quantities The Mini Solvent Pump is a high-quality hand pump for use with liquids and flammable media such as acetone, ethanol, isopropanol and methanol. Use with small containers such as bottles, canisters, carboys and tanks with GL45 threads, from 1 liter up to ~ 10…