Heel Grounder Converts non-ESD footwear to footwear that will provide a path-to-ground and will not generate a charge. Tab to Cup Resistance: 1 x 106 to < 1 x 107 ohms at 100 volts Meets the ANSI/ESD S20.20 required limit tested per ESD SP9.2 & ESD TR53 High…

The SCS 31 Inch smock jacket with knitted cuffs, is mainly used for ESD sensitive electronic devices. It is made of sturdy 9% carbon material, which ensures durability and long lasting usage. Groundable static control garment system tested per ANSI/ESD S20.20-2014 (Rtg Minimum of 9% carbon…

Use Desiccant Pack in Moisture Barrier Bags to absorb moisture Reusable - Desiccant packs can be reactivated by oven drying MIL-D-3464 Desiccant Regeneration Instructions Lead-free RoHS compliant 300 packs per pail Made in the United States of America Specifications 13844…

The 3M Ionized Air Gun 980 Is An Excellent Tool For Blowing Particulate Contamination Off Of Any Surface. It Releases A Balanced Stream Of Compressed Ionized Air That Neutralizes The Static Charge That Can Hold Particulates To A Surface.

English 17” x 22” ESD Area Warning Poster (Pack of 5) Indicates the existence of an ESD Protected Area to personnel prior to entry into the Protected Area. Poster Paper with Varnished Semi-Gloss Overcoat Designed for long term use in an electronics production environment. …

Metal Expansion Wristband Used with a coil cord to create a path-to-ground for an operator with resistance Designed to allow the operator to adjust the size (circumference: 5.75" - 13") to their wris

Static Dissipative Sheet Protectors are made from durable static dissipative polypropylene plastic. Ink from photo copies will not stick to it. A thinner (2 mm) sheet allows for more documents to be placed into a binder. The embossed pattern on the sheet protector helps to reduce glare. Each sheet…

Patented (US patents 6,052,053 and 6,205,408) Dual Wire Wrist Strap provides redundancy Even if one dual wire wrist strap conductor is severed, operator has reliable path-to-ground with other wire Use with resistive loop technology continuous monitor Continuously verifies the proper…

The SCS pre-printed attention label measuring 2 Inch x 2 Inch, is a ESD susceptibility symbol in English language. This adhesive, reusable label has yellow background with black legend, which makes it highly visible and easy to read.

Patented revolutionary magnetic interconnect technology (U.S. Patent 5,004,425) Creates magnetic connection between wristband and coil cord; meets ESD S1.1, including disengagement force test (1-5 lbs) Dual-wire wrist strap provides redundancy If one dual wire wrist strap condutor is…

The SCS one size metal wrist strap kit containing metal expansion wristband and coil cord, ensures path-to-ground connection. It is used to safeguard banana springs by preventing accidental disconnects from banana jacks.

Dissipative (1 x 106 to Converts non-ESD chairs to low charging, groundable chairs. Washable Polyester/Cotton Blend Extends lifespan of chairs by preventing dirt and contamination build up. Chair Back and Seat Connected to Drag Chain Allows chair to be grounded when on a conductive…

Conductive PVC Floor Matting Provides a flooring surface that does not generate a static charge and will act as part of the path to ground for an operator wearing ESD footwear Conductive (Rtt: < 1 x 106 ohms per ANSI/ESD 7.1 and ESD TR53) Pebble Embossed Surface Meets the required limits of…

D-Ring Fastening System Size adjustable material expands to fit most shoe sizes comfortably and flex during walking Extra-Wide Contact Area Additional surface area allows for a better path to ground. Tear Resistant Rubber With Inner Scrim Reinforced material prevents tearing - increasing…

6 Foot (12 Inches Of Coils) Coil Cord Used with a wristband to create a path-to-ground for an operator with resistance Strain Relief Tests Over 1 Million Cycles; 62 Times The Minimum Requirement Per ESD S1.1 Eliminates intermittent failures that occur with less durable cords and extends the…

The SCS MAGSNAP 360™ metal wristband ensures electrical connection of people and other conductors to ground connection, within ESD protected area. It is made of high quality material which ensures durability and long lasting usage. Magnetic connection between wristband and coil cord Dual wire…

Large Contact Area on Ball of Foot The combination of additional surface area and the contact point on the ball of the foot forms a more consistent path to ground. Tear Resistant Rubber With Inner Scrim Reinforced material prevents material from tearing ‰ÛÒ increasing the service life …

The SCS medium metal wrist strap kit containing metal expansion wristband and coil cord, ensures path-to-ground connection. It is used to safeguard banana springs by preventing accidental disconnects from banana jacks.

Velcro Stretch Hook And Loop Fastening System Size adjustable material expands to fit most shoe sizes comfortably and flex during walking Tear Resistant Rubber With Inner Scrim Reinforced material prevents tearing - increasing the service life of foot grounder 30" Long, 8 Conductive Strand…

The SCS small metal wrist strap kit containing metal expansion wristband and coil cord, ensures path-to-ground connection. It is used to safeguard banana springs by preventing accidental disconnects from banana jacks.

Wrist Band Extra wide, soft elastic band Increased wearer comfort. Has silver impregnated polypropylene knitted on inside for superior conductivity Reliably removes generated static charges. Additionally, silver fibers are antibacterial to help keep the band and operator clean. …

12 Foot (24 Inches Of Coils) Coil Cord Used with a wristband to create a path-to-ground for an operator with resistance Strain Relief Tests Over 1 Million Cycles; 62 Times The Minimum Requirement Per ESD S1.1 Eliminates intermittent failures that occur with less durable cords and extends the…

Wrist Band Extra wide, soft elastic band Increased wearer comfort. Has silver impregnated polypropylene knitted on inside for superior conductivity Reliably removes generated static charges. Additionally, silver fibers are antibacterial to help keep the band and operator clean. …

The SCS two state wrist strap tester containing AC adapter and a hook and loop strip, is mainly used to connects to the utility ground when plugged in. It helps to test the entire circuit while normal use at the workstation.

The SCS MAGSNAP 360™ dual-wire coil cord with 3.5 mm right angle phono plug connector, offers static discharge shielding for ESD sensitive electronic devices. It is made of sturdy material, which ensures durability and long lasting usage.