(KITF1) (Thomas No. 1173C89) PosiTector Inspection Kit (KITF1) contains a Standard(1) PosiTector body, PosiTector 6000 ferrous coating thickness probe, PosiTector SPG surface profile probe, and a PosiTector DPM environmental probe.Each PosiTector body accepts the 6000, DPM, and SPG probes…

Positest® for the nondestructive measurement of non-magnetic coatings on steel Permanently calibrated Highly wear-resistant carbide probe for longest life and continuous accuracy Refined magnet and balance arm assemblies provide improved resolution and accuracy; four scale ranges…

PosiTector® SST Soluble Salt Tester for measuring the concentration of soluble salts on metal surfaces. Important Features: *Intuitive step-by-step interface guides users through the Bresle Method *Onscreen timer to report test duration *Automatic calculation of surface density of salt…

PosiPen® Measures non-magnetic coatings such as paint, enamel, plating and hot-dip galvanizing on steel Ideal for measuring on small, hot or hard-to-reach surfaces; has the smallest unique magnet of any coating thickness gauge Each has two scales: mils (inch) and microns…

Measure the thickness of applied dry coating powder before curing Manufactured to a tolerance of ±0.0002 Convenient shirt pocket size Available in mils or microns Gages are ideal for set-up and quality control. Gages work on a variety of part sizes, shapes and substrates…

PosiTector RTR Series - Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film™ replica tape. *Enhanced one-handed menu navigation *Automatically subtracts the 50.8 μm (2 mil) incompressible film from all readings *Minimizes inspector workload by…

The PosiTest AT series measures the adhesion of coatings to metal, wood, concrete and other rigid substrates. *Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke *Pull Rate Indicator to manually monitor and adjust the rate of pull *Environmentally sealed…

The  PosiTector 200  non-destructively measures a wide variety of applications using proven ultrasound technology. Measures coating thickness over wood, concrete, plastics, composites, metals and more. Advancedmodels measure up to 3 individual layer thicknesses in a…

PosiTector® DPM Standard and Advanced Environmental Monitoring Gages The PosiTector DPM1 includes a Standard(1) gage body, the DPM3 includes an Advanced(3) gage body and a built-in removable DPM probe for measuring and recording climatic conditions including: relative humidity, air…

All Gages Feature: Simple Ready to measure—no calibration adjustment required for most applications Enhanced one-handed menu navigation Flashing display—ideal in a noisy environment RESET feature instantly restores factory settings Durable Solvent, acid, oil, water and dust…

The PosiTest® LPD Low voltage Pinhole Detectoruses a wet sponge to detect holidays, pinholes and other discontinuities on metal and concrete substrates without damaging the coating. Supplied in a rugged inspection case, the easy-to-use PosiTest LPD includes everything needed for testing.…

All Gages Feature: Simple Fast measurement rate of over 50 readings per minute – ideal for quickly and accurately measuring large surface areas Enhanced one-handed menu navigation RESET feature instantly restores factory settings Durable Solvent, acid,…

The PosiTector 200 non-destructively measures a wide variety of applications using proven ultrasound technology. Measures coating thickness over wood, concrete, plastics, composites, metals and more. *Ready to measure - no adjustment required to measure most coatings *Enhanced one-handed menu…

The PosiTector SHD measures the indentation hardness of non-metallic materials such as polymers, elastomers and rubbers. In the corrosion industry, durometers are commonly used to ensure proper curing of pipeline repair wraps. Two models are available for different hardness ranges - Shore A and…

The PosiTest DFT Ferrous Coating Thickness Gage measures non-magnetic coatings on steel. It is the economical choice that retains the uncompromising quality of DeFelsko coating thickness and inspection instruments. *Fast, repeatable measurements *Ready to measure - No calibration required for most…

Both Models Feature: Simple Portable – requires no external power source – ideal for lab and field use Pull Rate Indicator allows operator to easily monitor and adjust the rate of pull in accordance with international test methods Easily select dolly sizes, change…

Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating…

Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating…

Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating…

Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating…

Certified coated polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a…

Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating…

Certified coated polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a…

Certified coated polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a…

Certified coated polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a…

All Gages Feature: Simple Enhanced one-handed menu navigation Pre-programmed velocities—simply select from a list of common materials or enter your own with ease SmartCouple™ mode eliminates unintentional decoupling—ensures continuous measurements while…

Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating…