Chemglass
-
Adapters, Hose, Airfree®, Schlenk
ChemglassAdapters for use with manifolds such as AF-0450 through AF-0454 to permit port connection to standard rubber hose. Adapters have hooks just below the grind for use with CG-110 stainless steel springs. The 24/40 size is available with a constriction above the serrated hose connection to permit bowl…
-
Adapter has a ground glass standard taper outer joint on top and bottom that provides a convenient leak free way to connect to the OP-6602-J 2L disposable long stem filter funnels and a standard taper flask. The unique design of the long stem filter funnel and vacuum adapter makes it unnecessary to…
-
Squibb style separatory funnel with a PTFE stopcock. Supplied complete with a flask length stopper of the listed size. For replacement stoppers see CG-3018.
-
-
Similar to CG-1103, but with a larger opening at the top of the jacket and a shorter overall height. Width to Height ratio on all sizes is 2:1. Beakers also have a FLAT Bottom on both the inner and outer vessel. Hose Connections have an O.D. of 10mm at the largest serration.
-
Used in the preparation of block copolymers or any chemical synthesis requiring high vacuum techniques. Funnel features a large diameter ring seal between the coolant container and the addition funnel body thereby reducing stress and permitting for use of a wide range of coolants, from ice-water to…
-
PTFE Baffle Cage, 4-Blade
ChemglassPTFE Baffle Cage, 4-Blade, 100mm ID Flange, for 1,000mL Vessel. PTFE insertable 4-blade baffle cage system for CG-1929-X series 100 and 150mm reactor systems. Baffle assembly has 4ea PTFE rectangular baffles attached 90 degrees apart to a 100 or 150mm flange ring. Flange ring is inserted between…
-
Flasks, Quartz, Flat Bottom, Single Neck
ChemglassSingle neck, flat bottom, quartz flask with standard taper outer joint.
-
Neoprene Filter Adapters
ChemglassNeoprene filter adapters are designed to fit between a filtering funnel and a flask. For use with Buchner funnels, Gooch crucibles, filter tubes, etc. Can be used individually or nested with adjacent sizes. Eliminates the boring of rubber stoppers and the difficulties of inserting and removing…
-
Stirrer Bearings
ChemglassGrease-Free PTFE stirrer bearing for use under moderate vacuum. The bearing consists of a PTFE standard taper body, Nylon compression cap, PTFE Insert/bushing and a Nylon loosening nut. The PTFE insert/bushing provides only glass and PTFE contact with the reaction. Loosening nut above the standard…
-
TLC Developing Chambers, Cylindrical
ChemglassCylindrical glass chamber for development of TLC plates from 25 x 75mm to 50 x 200mm. Chamber has a short length standard taper outer joint. Stopper is a short length inner with a tool ball style handle. The CG-1181-01 and -02 chambers have a hex base for added stability. Complete chamber is…
-
High Vacuum T-Bore Stopcocks
ChemglassSolid glass high vacuum stopcock with the NEW Chemglass improved constant pressure retention device. This unique retaining system incorporates a glass plug having an extended snelling which accepts a stainless steel spring and clip. The spring keeps constant tension on the plug at all…
-
Gas Manifolds, 4-Place, Glass Stopcocks
ChemglassFour port manifold with 2mm bore glass stopcocks on the ports. A "T"-bore stopcock is located 100mm from the end of the manifold and 40mm from the first port. The distance between the other 3 ports is 50mm with the last port being 75mm from the opposite end of the manifold. The entire…
-
Autosampler Vials
ChemglassWith a 40% larger opening, these vials are specifically designed to work in robotic arm auto samplers. They also incorporate the unique Step Vial design that precisely centers a limited volume insert in the neck of the vial. Available with graduated marking spots, and silanized.
-
Universal Stirrer Shaft Coupling
ChemglassUniversal Stirrer Shaft Coupling incorporates a universal joint to compensate for misalignment of drive motor and glass stirrer shaft. Nylon bushing compresses around shaft using an allen screw. Steel stud attaches directly to the chuck of a stirrer motor. Supplied complete with an allen wrench. …
-
Funnels, Powder, Outer Joints
ChemglassPowder funnel is useful for the introduction of solids or liquids into reactions under atmospheric conditions. Funnels have 60° side angle and a standard taper outer joint.
-
Heavy Wall blanks are 30% heavier than our standard CG-618 series. Blanks are used in the fabrication of single or multi-neck round bottom flasks. NOTE: NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.
-
CHEMcell® Rocker BioReactor
ChemglassFILLING BELLS, ASEPTIC, For aseptic filling of vessels. Tubing is attached to the serrated hose connection while the receiving vessel is placed inside the bell. Made from Type 1 Class A borosilicate glass. BOTTLES, ROUX, 1200ML, The 1,200mL Roux bottle is designed so that when laid down flat, it…
-
Minum-Ware® Deluxe Kit
ChemglassMINUM-WARE® KITS, DELUXE, This kit contains the microscale components to do all of the experiments described in Organic Laboratory Techniques, Donald L. Pavia, Gary M. Lampman, George S. Kriz, Randy G. Engel, Sanders College Publishing-Chicago IL. and Microscale Organic Laboratory, Dana W.…
-
Glassblowers Flask Blanks, Round Bottom
ChemglassBlanks for fabrication of single or multi-neck round bottom flasks. NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.
-
Glassblowers Flask Blanks, Flat Bottom
ChemglassBlanks for fabrication of single or multi-neck flat bottom flasks. NOTE: NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.
-
Square Cover Slips
ChemglassCover slips are manufactured from Float Glass, #1 thickness (0.13 to 0.17mm). Sold in packages of 1oz.
-
PTFE Bottles
ChemglassIsostatically molded in pure, FDA approved, PTFE. Heavy wall construction with super smooth internal finish. Screw cap housing for leak-free performance Suitable for low temperature applications. Hand grips for ease of manipulation Use up to 280°C (540°F). Totally…
-
Tube is designed for the collection and storage of gas samples. The 125mL has a sidearm O.D. of 9mm, the 250 and 500ml have a sidearm O.D. of 13mm, but with the addition of a syringe sampling port for use with a CG-3022-05 or CG-3022-22 septa. Supplied complete with one CG-3022-05 red rubber septa.
-
Vials are thin walled allowing more efficient heat transfer. Conical bottoms are designed for optimum sample retrieval. With 14/10 threaded outer joint. Supplied complete with open-top screw cap (MW-102-33), PTFE faced septa (MW-104-33) and Viton O-ring (MW-100-08).
-
Preassembled Amber GPI 10-425 Vials
ChemglassThese convenience kits come with 100 vials with the closures attached. Packaged in convenient vial trays.
-
Main vacuum line with 4ea 24/40 inner ports (A) having a unique configuration of 0-4mm Chem-Vac Chem-Cap®; valves. The valves are sealed to either the vacuum or inert gas side of the manifold and then bent to a 90º angle, forming a strong but very compact assembly. This configuration…
-
Extra deep baffle indents on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.
-
Coil Condensers
ChemglassFor use in construction of spiral or Graham style CONDENSERSs. Coils can be sealed together to form longer lengths.
-
-
Reaction Vessels, Cylindrical
ChemglassCylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. For clamp see CG-141 or CG-141-T, for o-ring see CG-147.
-
Tru-Stir Stirrer Shaft Coupling
ChemglassThe unique design of our Tru-Stir™ stirrer shaft coupling eliminates the need to use rubber hose or universal adapters to attach your stirrer shafts to overhead stir motors. Coupling incorporates a unique helical stainless steel spring permitting up to 1/4” of offset misalignment and…