If bulk goods are transported over long distances (in trucks, railway goods wagons), separation may occur. Taking the sample just from the surface therefore leads to the wrong result. Representative samples from all layers of the silo can be taken with the SiloDrill. The SiloDrill fits through…

The SteriPlast® Bio sample scoop made of green PE is produced in our clean room of class 7 (10,000), individually wrapped in bio-PE film for disposable use and then sterilised by gamma rays. Green PE bio-plastic has all the suitable properties of conventional polyethylene but is…

The scratcher is a special sampler for powders and granules that do not flow freely. The sample is transferred to the closable inner tube using a scraper. Sliding PTFE separators are used to divide the inner tube into different zones. The separators also prevent the sample from being mixed. …

The laboratory trays are practical all-purpose trays that can be nested when empty, also durable, shatterproof and resist flexing. The trays have a strong, rounded rim. Suitable as a spill trough for environmentally dangerous, aggressive substances, for experiments, as an etching tray, as an…

Immersion cylinder for sampling crude oil, liquid mineral oil products, fuels, special and test fuels, fuel oils, petroleum and liquid lubricants in Explosion Categories IIA, IIB and IIC. Completely made from non-spark producing materials, nickel-plated. Dipping containers are used in various areas…

Mini solvent pump reliable filling of small quantities The Mini solvent pump is a high-quality hand pump for small containers such as bottles, canisters and tanks up to about 10 litres. For reliable filling and dosing of solvents and readily flammable liquids. Simple principle - highly…

Burkle MultiDispo Disposable zone samplers for taking samples from multiple layers of the sample material (25mm diameter) These single-use DispoSamplers are available in packs of 20 each. They are used to take target point samples, all-layer and cross-sectional samples of liquids,…

Cylindrical T hose connector to connect hoses. PVDF , Temperature resistant up to +160 °C max., highly resistant to chemicals PP , Temperature resistant up to +135 °C max. Sterilisable

Cylindrical four-way hose connector to connect hoses. PVDF , Temperature resistant up to +160°C max., highly resistant to chemicals PP , Temperature resistant up to +135°C max. Sterilisable

Available either in a large package with 100 pieces or 100 pieces packaged individually and radiation sterilised. The shade of blue that is used does not occur in a natural form in foodstuffs. Because of this, blue products or parts of them can be quickly found and easily identified in a visual…

Bottle with drop dispenser and separate screw cap. Cut off dropper tip before first use Reclosable Precise drop dosing

Frame for pipettes with two rotating perforated plates and drip pan. The holders are suitable for up to 40 pipettes of different sizes, for all measuring and full pipettes up to a max. diameter of 18 mm. A drip pan protects the tips of the pipettes and collects liquid as it drips off. The…

DispoLadle is a sampling scoop specially designed for disposable use. The scaled scoop with embossing can be used for measuring. It shows contents in increments of 10 ml, up to 200 ml. An ergonomic handle and a spout on both sides for right or left-hand operation make handling simple and easy. …

LiquiMobil flow indicator made of SAN is mainly suitable for cooling systems and helps to reduce water consumption considerably because the cooling water flow can be adjusted better. Not suitable for aggressive substances. Flow indicators give precise visual indication of the flow velocity of…

CheMobil made of PMP/TPX can be used for many substances due to its good chemical resistance. Not suitable for strong acids, alkalis and solvents. CheMobil can be steam sterilised. Flow indicators give precise visual indication of the flow velocity of liquids or gases being transported through…

The SteriPlast® sample scoop made of polystyrene is produced and assembled in our clean room of class 7 (10,000, except for the 1000 ml scoop), individually wrapped for disposable use and then sterilised by gamma rays. The sample scoop is ideal for powders, granulates and pastes. The…

Device for easy operation to quickly fill off watery liquids from containers higher up to containers lower down. Works according to the siphoning principle: Liquid needs only to be primed once, therefore especially handy for complete emptying of a container. LDPE/PVC Pump capacity 9…

Hand-operated solvent pump for contaminationfree removal of organic solvents and flavouring agents. The hand pump works according to the overpressure principle. An excess pressure is built up in the tank with the pump ball, forcing the liquid out of the container. Pouring flammable liquids …

The food pressure sprayer has a transparent viewing window to make it easy to read the fill level. A rubber-coated ring stand ensures that the sprayer can be set down securely. The built-in safety valve protects against overpressure (max. 3 bar). The adjustable nozzle nut makes it possible to…

Solvent pump foot operated for filling off high purity liquids such as solvents. Pouring flammable liquids All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE. The Bürkle anti-static set can be used to ground the pump for dispensing flammable liquids so…

No additional ventilation opening required, PE, transparent, 3/4" thread connection outside. Self-venting NW 13 mm Seal made of natural rubber

Cylindrical angle hose connector to connect hoses. PVDF , Temperature resistant up to +160°C max., highly resistant to chemicals PP , Temperature resistant up to +135°C max. Sterilisable

Sampler for ground water samples from wells, pits and other sources. Fits all normal well shafts with control openings to Ø 2", without tilting or getting stuck. Ultra pure materials guarantee the highest degree of sample purity. Easy to clean thanks to rounded edges and threads. …

The SteriPlast® spoon for foodstuffs, made of polystyrene, is produced in our class 7 clean room (10,000), individually wrapped for disposable use and then sterilised by gamma rays. The spoon for foodstuffs is available in two sizes, 2.5 ml (similar to a teaspoon) and 10 ml (similar to a…

Sampler for pourable bulk goods up to approx. 1 cm in diameter. This makes it possible, for example, to remove hazel nuts, blends of tea, grain or similar items from large sacks. Also for coarse-grained bulk goods Made of stainless steel AISI 316L (1.4404) Special geometry of the tip

Jumbo sampler with a tube diameter of 50 mm, ideal for coarse grains and larger quantities. With an open inner tube and large sampling volume, for all-layer samples through all layers of the sample or with sample chambers separated by PTFE separators for multi point sampling from several…

The compact jerrycan, made of electrically conductive HDPE, is especially well suited for use in explosion-proof areas. With a specific surface resistance of <105 ohms, the canister has a very high electrical conductivity. When correctly earthed, it prevents the danger of ignition due to an…

Sampler for deep-frozen products in the food and luxury items sector and for semi-solid substances. The very robust hollow drill cuts quickly into the sample material with its sharp sawing crown. A sample cylinder (cross-section sample) can be cut out. The ice drill can be mounted on your…

The MicroSampler has especially been designed for the sampling of small quantities of powder. Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.The tips of the MicroSampler are…

The ChemoSampler was developed for sampling aggressive liquids, e.g. acids, alkalis, detergents. The samples are drawn directly into the screw-on original sampling bottle. The tamperproof bottle closure of these bottles with original safety ring ensures unadulterated sample transport. Samples can…

The bucket is made entirely of high-gloss polished stainless steel. The smooth surface of the stainless steel bucket makes it easy to clean. The rounded, movable handle makes it comfortable to move the bucket. The laboratory bucket is suitable for moving liquids and bulk materials…

The stainless steel forceps with angled shape allow for accurate work in the laboratory. The pointed, fluted ends can be used to work reliably with sensitive materials, tissue or samples. Flutings on the handle ensure a slip-free grip of the stainless steel tweezers. The angled laboratory tweezers…