Maintain the performance of your still with Thermo Scientific™ Barnstead™ classic stills replacement consumables, including UV lamp and Thermo Scientific™ Ventgard™ filter element (the consumable portion of the Ventgard filter assembly). Prevent air from entering the reservoir via the condenser…

Each cartridge kit includes one 0.2 micron absolute final filter.

Complete packages in one part number. Packages include the system and start-up consumables. Deliver ultrapure 18.2 megohm water from tap water with consistent quality, outstanding flexibility and great savings. Smart2Pure UV 3LPH Package Includes: the Water Purification System, Built…

The Barnstead 5000 gallon deionizer cartridge is suitable for use with Thermo Scientific™ Barnstead™ Bantam™, B-Pure™ or Nanopure™ water purification systems. Choose from an array of Thermo Scientific™ Deionizer Cartridges based on your application needs These cartridges are for use with the…

Can be wall or bench mounted Micro controlled purity monitor LCD shows resistivity, conductivity or TDS Programmable setpoint alerts user to change cartridges Four individual cartridges are available for all applications. Standby mode recirculates water for ten minutes every hour…

Multiple options for Type 2 water Five system options with permeate flows of 3, 7, 12, 20, or 40L/hr Future system upgrades accommodate greater capacities to meet growing water demands Space-saving design permits benchtop installation or wall mounting with integrated mounting bracket…

For added protection, the door safety switch stops power to heating elements when door opens Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition Two open coil heating elements on chamber sides assure fast heat-up with minimum…

Solenoid Valve Assembly for MegaPure Stills. Replacement for Models: MP-3A, MP-6A, MP-11A

220°C (428°F) maximum temperature 0.44 cu. ft chamber volume 24-month warranty Radiant warm wall heating system provides optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications. Vacuum fittings require .25” (.6 cm) I.D. tubing. Model…

5 inches high

Prefilter Cartridge Produces up to 4 liters of pure water per minute Can be used as pre- or post-filter with B-pure systems or as stand-alone unit Easily attaches to existing B-pure system Inlet specifications: connection: 1/2" NPTP; maximum inlet pressure: 100 psig;…

The Barnstead LabTower EDI system delivers up to 200L/day of Type 1 ultrapure water (18.2 megohm) or Type 2 pure water (10-15 megohm) from a tap feed water supply. Water product quality exceeds international standards ASTM Type 1 with a resistivity of 18.2 megohm and TOC 1-5ppb with…

Remote Dispenser attaches easily to the Nanopure® system and allows water to be delivered up to 8 feet away from unit. Design virtually eliminates any dead volume and the coiled tube allows for easy use while taking up a minimal amount of space. Printer provides paper documentation of the unit…

Achieve maximum temperatures of 220deg C (428°F) with Thermo Scientific™ Vacuum Ovens, while benefiting from two control configurations and display options. These ovens feature independent vacuum and purge needle valves. Radiant warm-wall heating system optimizes uniformity and conserves chamber…

The Barnstead micro hot plate is the perfect replacement accessory for Barnstead water purification systems. It is ideal to use for laboratory applications such as chromatography, spectroscopy, genomics, proteomics and pharmacology.

Monitor pressure drop across any of the 10 in filter cartridges used in the B-Pure™ 1/2 size filter holder with a Thermo Scientific™ Barnstead™ 1/2 Size B-Pure™ Pressure Gauge.

The Barnstead gasket is the perfect replacement accessory for Barnstead water purification systems. It is ideal to use for laboratory applications such as chromatography, spectroscopy, genomics, proteomics and pharmacology.

Obtain high purity water from distillation using Thermo Scientific™ Barnstead™ Mega-Pure™ glass stills, constructed of non-leaching components. These glass stills effectively remove inorganic solids, organics with boiling points higher than water, bacteria and pyrogens. Available in five production…

The Barnstead 110 Volt heating element is suitable for use with RC1915 remote control hot plate and 64 series hot plate models.

The Barnstead heater with an electrical rating of 240 Volts, 2500 Watts is designed to use in industrial furnaces and boilers to maintain a constant temperature throughout the operation.

The Barnstead thermocouple assembly is mainly used to measure and regulate temperature. It is suitable for domestic and industrial applications.

The Barnstead type K thermocouple assembly is mainly used to measure and control temperature. It is suitable for domestic as well as industrial applications.

Consistent water quality Type 2 laboratory water meets ASTM Type II, CSLS-CLRW and ISO 3696 international standards The LabTower is designed to continuously recirculate purified reservoir water to preserve water quality even during periods of inactivity Compact mobile design …

Verifies the sterility of your instruments, glassware and other products in just two days Simple, three step process Run indicator through standard sterilization cycle; compress plastic vial to break glass ampule inside and then incubate for a minimum of 48 hours. When complete,…

The Barnstead control configured SSP RPO-P is designed to use in biotech, pharmaceutical, chemical laboratories, research facilities and medicinal facilities.

The Barnstead accessory is suitable for use with all kinds of Barnstead RO and TII water purification systems.

The Barnstead solenoid valve is the perfect replacement accessory for Barnstead water purification systems. It is ideal to use for laboratory applications such as chromatography, spectroscopy, genomics, proteomics and pharmacology.

The Barnstead type K thermocouple assembly is mainly used to measure and control temperature. It is suitable for domestic and industrial applications.

Capacity 45 liters (12 gallons) Automatically controls still operation to maintain 35-45 liter reserve of high purity water Designed for use with any Corning automatic water still including 3915L41 Model MP-3A, 3915M50 Model MP-6A, former Model AG-11 and Barnstead MP-11A and MP-12A, available on…

Clamp holds 2.8L Fernbach flask For use with MaxQ universal shaker platforms (sold separately) Stainless steel construction, with retaining rings One spot count Includes one clamp

Produce from 100 to 600 liters of laboratory grade water per day Microprocessor controls allow for 24 hour fully automatic operation Integral pump for consistent operation and flow rate Can be wall or bench mounted A series of internal pressure gauges allows you to monitor…

The Barnstead adjustable vessel platform measuring 18 Inch x 18 Inch, is suitable for use with MaxQ™ 4000 and 6000 shaker models.