Non-sterile, sample prep membrane filters 7 membrane types Female Luer-Lock inlet, male Luer-slip outlet Solvent resistant polypropylene housings PES, GMF, Polypropylene and Cellulose Acetate membranes are certified for Ion Chromatography The polypropylene housings with…

Increased throughput and speed of sample preparation Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples. Strict quality control: Syringe filters are…

Minisart ® SRP syringe filters with a clean and chemically inert PTFE membrane. The units are ready-to-use and allow for simple, rapid and reliable ultracleaning of small volume samples for HPLC or GC analysis, which require an even more chemical resistant unit than Minisart ® RC, e.g.…

Minisart NY: Polyamide, i.e. Nylon (NY), membrane provides rapid small volume filtration of both aqueous and solvent-based samples.

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Mixed Cellulose Ester (MCE) Filtration of aqueous solutions; effectively…

Safe, convenient laboratory pipetting Pipets over 2,000 times without recharging Lightweight (<10 oz.), compact (<7 in.) and totally portable with power built into the handle Filtered, fail-safe nosepiece provides positive protection for electronic components and prevents…

For particulate removal prior to HPLC analysis. Cellulose acetate membrane for biological or protein-based samples. Low nonspecific binding with limited chemical resistance. Good flow rate characteristics. HPLC certified Cellulose Acetate membrane Medical grade, virgin polypropylene…

Minisart Air, for sterile venting and gas filtration, validated, non-sterile, gamma-irradiatable PTFE membrane, pore size 0.2 µm, connector inlet: Female Luer Lock.

mdi PVDF membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50

Increased throughput and speed of sample preparation. Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples. Increased operating pressure up to 130 psi due to the…

mdi PTFE membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

Non-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig (10…

A syringe filter generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter. We offer three filter diameters: 15mm, 25mm and 30mm with membranes made of the following materials: PA…

STERILE MILLEX® SYRINGE FILTERS Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore…

A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Cellulose acetate (CA) sterile/non-sterile Cellulose acetate filters show a…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Glass Fiber (GF) For viscose solutions or for turbid liquids. Ideal for use…

A syringe filter generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter. We offer three filter diameters: 15mm, 25mm and 30mm with membranes made of the following materials: …

Syringe filters for convenient filtration of small sample sizes through membranes. PTFE membranes are permanently hydrophobic and resistant to solvents, acids, and bases.

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polytetrafluoroethylene (PTFE) PTFE membranes are hydrophobic; thus they…

EZFlow 13mm, 25mm, and 33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with…

New ergonomic design - the most comfortable pipettor you ever laid a hand on New power source for uninterrupted extended operation - can be charged while in use New ultra quiet precision pump - great control for aspiration or dispensing The new Drummond Pipet-Aid XP2 advances the…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyamide/Nylon (PA) This is a hydrophilic material; it is recommended for…

Pistol-shaped, with diaphragm-type pump, for filling and delivery from most pipets size 1 mL to 75 mL Silicone rubber nozzle socket takes pipets with 3 to 9.5 mm o.d. mouths Internal intake and discharge valves are operated by spring-loaded buttons on handle; finger pressure controls…

Finneran 25mm Robot Filters were developed specifically for automated sample filtration systems. Autoclavable.

mdi PES membrane Syringe filters type SYKG incorporate a PES membrane filter with a multilayered binder free borosilicate Microglassfiber prefilter in a polypropylene housing. The microglassfiber prefilter provides excellent protection to the final membrane filter due to its high retention…

mdi Nylon-66 membrane Syringe filters type SYGN incorporate a Nylon-66 membrane with a binder free borosilicate Microglassfiber prefilter in a polypropylene housing. All mdi syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC…

Syringe filters for convenient filtration of small sample sizes through membranes. Nylon (Polyamide) membranes are hydrophilic and widely used in both aqueous and organic solvent filtration applications.They are best used in a pH range of 3-14 and at an operating temperature below 100 degrees Celsius.

A 25 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophobic PVDF membrane. Super hydrophobic membrane for Transducer protection Clear PVC housing material Ethylene oxide sterilized Comes in a pack of 50

A syringe filter generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter. We offer three filter diameters: 15mm, 25mm and 30mm with membranes made of the following materials: PS…