With marking spot and deep form, black phenolic plastic caps with cemented rubber liners Caps are autoclavable; see 9210R18 series for conditions (unattached) Listings indicate tube length x o.d. in mm

Same as the 9210E23 series, but caps have Teflon ® overliner bonded to the rubber liner Listings indicate tube length x o.d. in mm

Labcon SuperClear® precision-molded, conical and round bottom tubes are perfect for a multitude of general laboratory uses. Precision crafted of extra clear virgin polypropylene in natural and colors or clear virgin polystyrene. Tube caps are made of low density polyethylene for a secure seal…

These tubes are suitable for tissue culture work and general bacteriological use. 73760 series and 90 series items that end in ‘F’ have flat bottoms which contribute to stability 73770 series items are produced with a round bottom Modular trays are shrink-wrapped in…

With lip and marking spot Made from KG-33 glass tubing Listings indicate length x o.d. in mm.

Borosilicate Glass Tubes with 1-3/8" Vertical Labels These Chase brand Mark-M™ glass culture tubes feature a permanent vertical ceramic label, fused to the glass, which is easily written on with marker or pencil. Permanent marking spots Borosilicate glass tubes have…

Horizontal pack     Soda-lime glass, with Neutrex® interior surface treated to produce low surface alkali, conforming to USP XX and NF XV (1980), p. 949, Type II glass.     Packed horizontally in shallow trays. Case contains 4 trays of 250…

Horizontal pack Similar to 9186R20 series, but of borosilicate glass with large, matte white enamel spot for marking with pencil, wax crayon, ball- point or felt tip pens Packed horizontally in shallow trays. Case contains 4 trays of 250 tubes each. Listings show length x o.d. in mm.

With two-position vent stopper that fulfills two functions: When attached lightly, this enables a uniform ventilation of the tube contents When attached firmly, by pressing in the stopper further, an airtight closure of the tub

These Chase brand Mark-M™ glass culture tubes feature a permanent vertical ceramic label, fused to the glass, which is easily written on with marker or pencil. Permanent marking spots Labels are located 3/4" from the open end All tubes have sturdy, uniform bottoms and…

Made from KIMAX KG-33 glass tubing Round bottom and slightly constricted neck with Standard Taper solid ground glass stoppers Tubes have a sand-blasted spot for marking 100 x 13 mm size test tubes include No. 9 Standard Taper stopper; 150 x 16 and 150 x 19, No. 13; 175 x 22 and 200 x…

Borosilicate glass KIMAX-51 glass tubes with fire-polished top rims and uniform wall thicknesses for maximum heat transfer and chemical resistance. Designed from ASTM Specification E982, Type IV requirements. Reusable tubes KG-33 Glass Plain end Fire polished rim Without marking spot

Polypropylene or polystyrene Standard sizes Sterile or non-sterile Available with or without snap cap Thomas Culture Tubes can be used for almost any laboratory procedure. They are chemically free and biologically inert. These tubes are precision molded from premium grade materials and checked…

Please join us to support breast cancer prevention, treatment, and research by purchasing Pink Colorware from Kimble®. We will donate 20% of the proceeds to the Breast Cancer Research Foundation, the highest rated breast cancer organization in the United State. BCRF is recognized as one of the…

The stainless steel cylindrical closures are excellent for microbiology and related applications. Non-contaminating closures may be autoclaved repeatedly without loss of resilience. The indentations on the top surface permit adequate exchange of gasses under aerobic and anaerobic conditions, yet…

Deep form, of black phenolic resin with cemented rubber liner. As supplied with 4893D11 series Flasks and 9210E23 series Test Tubes. Can be autoclaved for 20 minute periods at 121°C. Rubber liners have been found to be satisfactory for tissue culutre. Cap size shown is GPI thread finish.

Tube made of polypropylene / Cap made of polyethylene Conical bottom tubes with self-standing base graduated from 10 to 30 ml and 10 to 50 ml respectively in 5 ml increments. Chemically resistant and shatterproof, they are supplied with a leakproof screw cap, particularly important when…

Made of either polystyrene or polypropylene For users who prefer a more compact packaging with tubes oriented horizontally. Tubes are placed in a convenient space saving plastic tray. Stateof- the-art packaging keeps your tubes neatly aligned for easing manipulation. For further details…

Gas Dispersion Tube, Fritted, 90, Synthware, Disc Diameter: Available in sizes ranging from 20-40mm, Required opening diameter varies , Porosity: Medium, Coarse or Xtra Coarse available, Stem OD: 8mm, Stem Length: 150mm, The 90° angle permits bubbles to be spread over a large area.

Made of polypropylene For your special needs, these tubes are identical to the T341 Series but are graduated and are provided with a white marking area for sample identification. Can be used at extreme temperatures from -196°C to +121°C. Certified RNase-, DNase-, Pyrogen-…

Labcon SuperClear® precision-molded, conical and round bottom tubes are perfect for a multitude of general laboratory uses. Precision crafted of extra clear virgin polypropylene in natural and colors or clear virgin polystyrene. Tube caps are made of low density polyethylene for a secure seal…

Plain Soda Lime Glass Tube, 18x150mm, Plain

Dimensions shown are length x o.d. in mm.

Starswabs II® are the reliable choice for the collection and transportation of a wide range of bacteria. Quality control procedures are compliant with CLSI document M40-A guidelines. Swab formats include single, double, straight wire, and flexible wire. Available in four different media types to…

Labcon SuperClear® precision-molded, conical and round bottom tubes are perfect for a multitude of general laboratory uses. Precision crafted of extra clear virgin polypropylene in natural and colors or clear virgin polystyrene. Tube caps are made of low density polyethylene for a secure seal…

KIMBLE CHASE micro-hematocrit tubes are used to measure t he vo lume percentage of red blood cells in blood.   ·          Packed in plastic vials with reclosable snap-lock caps to maintain cleanliness ·…

CELLSTAR® Cell Culture Tubes are made of high-grade polystyrene and are available with screw cap, bayonet cap or two-position vent stopper.

Convenient packaging—bulk or individually wrapped (sterile), and bulk or packs (non-sterile) Available with two-position snap cap, screw cap or without caps Choice of polypropylene (PP) or polystyrene (PS) Thermo Scientific* Samco multi-use tubes are designed for most laboratory…

Replaces 9215E95  

KIMAX® culture tube intended primarily for use in the testing of milk for the presence of bacteria by the methylene blue reductase test. Smooth, fire-polished rim Graduation line is located at the 10 mL level Durable white ceramic enamel marking spot Described in APHA Standard…

Save time and minimize waste costs when performing quantitative analysis or storing materials. Thermo Scientific™ Silanized Disposable Culture Tubes are pre-processed with a silanized surface deactivation treatment, and are offered in convenient, ready-to-use clean packs. Surface deactivation…

The Ace Glass porosity E filter tube measuring 300 mm long has a break-resistant construction and is designed to use with 10 x 30 mm tip of the porous fritted glass.