Eppendorf Safe-Lock Tubes are the result of 50 years of continuous improvement and development. The original Safe-Lock tubes protect your sample with excellent centrifugation stability, feature perfect sealing properties, and reliably prevent sample evaporation. Trust in the original Eppendorf…

Globe Scientific is pleased to expand on this line of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements.…

High strength centrifuge tube - 13,100 G Available plain or with screw-thread top Chemically strengthened Can be centrifuged up to 13,100 RCF (with appropriate rubber sleeve adapter in a 50 mL rotor cavity) 15 mL and 30 mL reusable tubes achieve greater mechanical strength…

Micro Centrifuge tubes are available in three sizes; 0.5ml, 1.5ml and 2.0ml. CELLTREAT Micro Centrifuge tubes have an attached flat top cap, engraved graduations and are manufactured from high quality polypropylene. The tubes have a temperature range of -80°C to 120°C. CELLTREAT Micro…

Tubes are made from borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. With conical shaped bottoms on the 5, 10, and 15 mL sizes and a bullet nosed shape on the 50 mL size to withstand centrifugation up to 2980 RCF. Tubes are plastic shrink…

Tubes are made from borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. With conical shaped bottoms on the 5, 10, and 15 mL sizes and a bullet-nosed shape on the 50 mL size to withstand centrifugation up to 2980 RCF. The 5, 10, and 15 mL sizes…

Eppendorf Protein LoBind Tubes are specifically designed for use in proteomics or other fields of protein research, where protein concentration tend to be very small and sample recovery is vital for assay results. Significantly more protein can be recovered for downstream analyses and enzymes…

Dimensions: 79mm (3-1/8") long Easily open all sizes of microcentrifuge tubes with just one hand One end opens 1.5 to 2.2ml tubes, forked blade on opposite end opens smaller sizes: 250m, 400m, and 550m tubes

These disposable screwcap microcentrifuge tubes are available sterile or non-sterile. The sterile tubes include a cap with a clear (natural) nitrile o-ring. All are DNase, RNase and Pyrogen free. These disposable screwcap microcentrifuge tubes are available sterile or non-sterile The sterile…

Polypropylene tubes withstand up to 12,000 × g. Polyethylene tubes withstand force to 6,000 × g. Our polystyrene tubes withstand 3,000 × g and are useful in lipid fractionation.

Microtiter tube systems are available pre-racked in an 8 x 12 format and can be autoclaved, sealed and frozen for storage. Tubes offer additional volume capacity for sample dilution and/or mixing prior to a range of procedures including HTLV-III testing, RIA, EIA, PCR, pharmaceutical quality…

They are molded from premium grade polystyrene for clarity or polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable.…

MTC Bio’s SpectraTube™ is a new twist on a staple in the life science laboratory. We’ve taken the proven design of the 15 and 50mL conical tube and configured them conveniently in a foam rack with five different colored caps to make sample identification a breeze. These tubes…

Frosted or non-frosted Graduated or non-graduated Three capacities: 0.6, 1.5 and 2.0 mL 0.6 mL microcentrifuge tubes are rated at 30,000 x G and are available graduated/frosted or non-graduated/non-frosted versions. 1.5 mL microcentrifuge tubes are rated at 26,000 x G and are available…

These new tubes have molded ridges matching serrations on racks such as the Simport T360 OneHand™ microtube rack, thus allowing the removal of caps with one hand. All Simport® Micrewtube® closures can be used on these tubes. Manufactured of exceptionally high-quality, transparent polypropylene…

These disposable screwcap microcentrifuge tubes are available sterile or non-sterile. The sterile tubes include a cap with a clear (natural) nitrile o-ring. All are DNase, RNase and Pyrogen free. These disposable screwcap microcentrifuge tubes are available sterile or non-sterile The sterile…

Skirted, self-standing tubes with a conical bottom Graduated at 1.0mL intervals and feature a large frosted writing area Caps fit tubes securely for a leakproof seal Sterile tubes come with caps attached

For safe handling of microcentrifuge tubes For tubes up to 1.5 mL; maximum cut diameter: 9.4 mm (0.370") Retrieve radioactive pellets from the tips of tubes easily without resuspension or the risk of splashed radioactive substances. Can be used with polyethlyene, polypropylene…

Skirted, self-standing tubes with a conical bottom. Tubes are graduated at 1.0mL intervals and feature a large frosted writing area. Caps fit tubes securely for a leakproof seal. Sterile tubes come with caps attached. Transport tube comes with a blue cap Certified RNase, DNase, and…

Conical 15mL and 50mL centrifuge tubes are made of premium polypropylene for clarity and centrifugal strength. Tubes and caps may be frozen at temperatures as low as -86°C. The maximum centrifugal force is 12,000xg for the 15ml tubes and 15,000xg for the 50 ml tubes*. Caps have a flat top…

Standard taper KIMAX tube. Calibrated "to contain". Top is beaded for strength. Scale and marking spot are printed in permanent red stain. Marking spot is blasted on both sizes.

Made of polypropylene Rotor-Gene™ analyzer was formerly designed by Corbett. These RotoCycler™ strips are perfectly designed to perform on Rotor-Gene™ instruments. Tube strips are packaged separately from cap strips. The frosted extensions on caps not only make them more…

Made of polypropylene These Simport Centrifuge Tubes offer superb quality and performance at an affordable price. They feature an extended lip for easy opening. Marked graduations and frosted labeling panels on tube and cap for easy writing and identification. These Simport centrifuge tubes…

Round bucket centrifuge tube adapter for 50mL Falcon® centrifuge tubes. Adapter is for use with the Eppendorf® swing-bucket rotor (A-4-38) for centrifuges 5702/5702 R/5702 RH Tube has a conical bottom that  fits 1 tube per adapter; 4 tubes per rotor Adapter diameter is…

Available in 0.5mL, 1.5mL, 2.0mL & 5mL Diamond Midi™ Locking Centrifuge Tube Locking Centrifuge Tubes are engineered with a secure locking system that provides the security of a screw cap microtube with the simplicity of a snap cap tube. Features: Secure –…

Graduated, 1.5 mL total capacity Seals securely with one hand Pierceable lid Graduated, rugged tubes are designed to withstand the stress of high speed centrifugation up to 17,000 rpm. The Microlock ® closure has a latch feature that eliminates sample loss and hazardous…

KIMAX tube used for the determination of small quantities of solids in large volumes of liquids. Calibrated to contain. Stem is graduated in 0.01 mL to 0.2 mL and the body has graduations at 25, 50, and 100 mL. Recommended for the determination of free water and sediment in diesel and other…

Polypropylene tubes include blue HDPE leak-proof screw caps. The tubes and caps feature specially-designed flat threads for vacuum-type closure that is leak-free at a press of >700mm Hg. Highly smooth hydrophobic internal surfaces minimize wall effect. Silk-screen graduations and a frosted…

Glass-like clarity allows easy viewing of sample and pellets. A positive seal design allows repeated cap closures that will not pop during boiling. All tubes feature external graduation marks and frosted writing surfaces. Available in natural and five additional colors. All Microcentrifuge tubes…

Polypropylene tubes include a convenient flat bottom so they stand on their own, a large white frosted labeling area, silk screen graduations, and a leak-proof cap. Autoclavable at 121°C and 15 psi for 30 minutes. Radiation sterilized DNase, RNase, Pyrogen and latex-free. Maximum RCF 9000.

Tubes: made of strong, highly transparent medical grade polypropylene Flat-top caps: made of medical grade polyethylene Plug-seal screw on caps: made of medical grade polypropylene 15ml and 50ml conical tubes available; large white writing area for easy marking Double threaded design…

Available in 15mL opaque black to protect light sensitive compounds Large white marking area provides excellent contrast for identification All tubes are manufactured from high quality polypropylene and have smooth, flat surface polyethylene (HDPE) caps Maximum RCF is 12,000g for 15mL…