Ideal for general laboratory use including mixing, storing or transporting culture media, chemicals or solvents Enhanced graduations Wide mouth with pour ring Completely autoclavable Polypropylene caps included Extra-wide opening for ease of filling, dispensing, pipetting …

KimCote® plastic-coated bottle has enhanced graduations and marking spot is permanent white enamel. This general use bottle is provided with a wide opening (approx. 30 mm ID) GL 45 screw thread and is supplied with linerless autoclavable (121 ºC max) polypropylene blue cap. Bottle design includes a…

Manufactured from borosilicate glass which provides the best chemical resistance Graduations and marking patch assists in measuring volume and identifying content Special pour lip facilitates pouring Packaged in partitioned carton to help prevent scratch marks on bottles

Polypropylene Reagent Bottles with Screw Caps Rugged, slope-shouldered bottles are made of polypropylene with polypropylene screw caps. They provide excellent chemical resistance to alcohols, aldehydes, aliphatic hydrocarbons, bases and many acids. Linerless caps have an internal sealing ring.

Designed for storing and transporting light sensitive materials, amber media / solutions bottles are autoclavable, with permanent white imprinted graduations and marking spots. The supplied GL 45 cap is liner-less and both the cap and drip free ring are polypropylene and autoclavable to 140°C.…

Clear, square disposable polyethylene terephthalate (PET) bottles are space-saving and convenient to handle Clear, square polyethylene terephthalate (PET) bottles Ideal for mixing, sampling and storage in environments ranging from -40° to 50°C Raised graduations Neck ID: 29…

Borosilicate glass helps prevent pH changes 45mm screw thread, wide mouth finish Graduated with writing patch Special pour lip facilitates easy pouring Bottles, caps and pour rings are autoclavable Manufactured from USP Type I borosilicate glass Cap has a built-in wedge shaped…

Heavy-duty, reusable bottles Wide opening for easy access Polypropylene pour rings included The RAY-SORB® process provides a shield to protect light sensitive products. Less than 1% transmission below 400 nm and reduced (5%) from 400-600 nm as compared to untreated, clear,…

Borosilicate 3.3 hybex glass Autoclavable caps (GL45) & drip rings Permanent enamel graduation markings Large area for bottle marking/identification Autoclavable, reusable and breakage resistant Five cap colors hybex™ reusable media bottles are manufactured from…

Heavy wall glass storage bottles with #15 Ace-Thred are intended only for storage of low-boiling liquids at room temps or at not less than -20°deg;C. Designed to resist internal pressures up to 100 psi, as low as -20°deg;C. The low pressure rating based primarily on the rating for PTFE…

Three-neck, made of heavy wall glass with standard taper 24/40 joints.

Our wide mouth, square-shaped, media bottles have large openings that enable the easy storage and transfer of substances. Every bottle is autoclavable and comes with easy to read imprinted graduations. GL80 Polypropylene screw caps are included.

These borosilicate glass, general purpose media bottles are autoclavable with permanent white imprinted graduations and marking spots. The screw thread opening has an ID of approximately 30mm. The supplied cap is liner-less and both the cap and drip free ring are polypropylene autoclavable to 140…

Rugged, autoclavable centrifuge tube boxes can be used at temperatures of -90°C to 121°C. Racks hold 36 each 15ml tubes, or 16 each 50ml tubes, and feature a clear lid for easy identification of contents.

Manufactured from borosilicate glass which provides the best chemical resistance Special pour lip facilitates pouring Packaged in partitioned carton to help prevent scratch marks on bottles

Foxx Life Sciences offers an exclusive line of EZBio® Single Use Bottle Assemblies available in Polyethylene Terephthalate Glycol-modified (PETG) and Polycarbonate (PC). Made with USP Class VI components and Gamma Irradiated in the U.S., these bottle assemblies come with tubing and vent filters…

Chemically resistant and stable laboratory bottles, approved for use vacuum or pressure. rated at -1 to +1.5 bar, (-14.5 to +21.7PSI). Bottle only with blue graduations, without cap or pour ring. For cap and ring see 7622. Available clear, amber or plastic coated. Temperature range up to 140°…

Stainless Steel Port Assemblies are designed for use with Media Storage Bottles for adding & withdrawing media. 3 Port models feature siphon, fill and vent tubes and is supplied with a 45mm Polypropylene blue open top screw cap & white silicone

Designed for use with 14395 series bottles and 26720 series flasks. Pour rings are made of clear drip-free polypropylene or red ETFE 14395E-452 high temperature ring is recommended for use with 14395H-452 high temperature cap

Space-saving, square shaped borosilicate glass, general purpose media bottles are autoclavable with permanent white imprinted graduations and marking spots. The screw thread opening has an I.D. of approximately 30mm. The supplied GL 45 cap is liner-less and both the cap and drip free ring are…

HDPE container with white LDPE-lined Polypropylene Cap Caps assembled onto containers Narrow mouth for precision pouring Recommended for collecting water samples and other low viscous liquids Sturdy handle for easy transport and pouring Unprocessed container comes assembled and ready…

Wheaton PETG Square / Octagonal Media Bottles are made of Eastman Tritan Eastar Copolyester PETG which is the resin of choice for single use labware and medical devices. This resin meets ISO 10993 and / or USP Class VI biocompatibility requirements and is Food Contact Status compliant. The PETG is…

Wheaton PETG Square / Octagonal Media Bottles are made of Eastman Tritan Eastar Copolyester PETG which is the resin of choice for single use labware and medical devices. This resin meets ISO 10993 and / or USP Class VI biocompatibility requirements and is Food Contact Status compliant. The PETG is…

Plastisol coating for safety USP Type I clear borosilicate glass Provided with graduations and writing patch 33-430 screw cap can be purchased separately Autoclavable

LDPE Bottles with Screw Caps Round-shouldered low density polyethylene bottles have polypropylene screw caps, and are suitable for storage of many acids, bases, aldehydes and alcohols. Linerless caps have an internal sealing ring for a positive seal.

Media Bottles are ideal for media prep and storage of laboratory reagents and biological buffers For use in stem cell, mammalian and bacterial culture applications Square design saves valuable shelf space Manufactured from medical grade virgin PETG which reduces gas permeability Flat…

Durable square bottles made from high-density polyethylene (HDPE) with low-density polyethylene (LDPE) screw caps. V94189 is made of LDPE and has a polypropylene (PP) screw cap.

Non-Graduated Media Bottles Screw thread laboratory/media bottles without graduations and marking spots.

1230K91 - 1230K96: Black phenolic screw caps With 14B rubber liner Autoclavable Ideal for culture work 1230L89 - 1230L94: Tear-off unlined aluminum seals This seal can be completely removed and contents readily poured from bottle

Stainless Steel Port Assemblies are designed for use with Media Storage Bottles for adding & withdrawing media. 3 Port models feature siphon, fill and vent tubes and is supplied with a 45mm Polypropylene blue open top screw cap & white silicone