KF25/NW25 premium grade 316L stainless steel angle flange with alumimum valve for ultra durability, great for all sorts of high vacuum operations. Grade 316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316…

FVB-25-10 Premium flexible stainless steel vacuum bellow (3.3 feet) with KF/NW25 flange connection for high vacuum operations. Compatible with the following products by Across International AccuTemp and Elite series vacuum ovens EasyVac 9 cfm vacuum pumps, CleanVac series scroll pumps, SuperVac…

Across International PTFE sealing sleeve for air tight vacuum operation. Designed with higher and lower bumps to enhance sealing. No-lip top allows you to put on your keck clip securely. This sleeve will increase vacuum level on your glassware setup, allowing you to achieve better results.

High quality one-piece stainless steel KF16/NW16 to KF25/NW25 flange adapter for secure vacuum connection. Compatible with Agilent IPD-3 2.1 cfm scroll pumps, Welch 1400N 0.9 cfm pumps and Welch 2163 6.1 cfm diaphragm pumps.

Synthware distillation connecting adapter. With standard taper top outer joint and inner joints at bottom and the side arm. Bottom and side arm joints are angled at 75 degrees to one another.

Premium quality stainless steel KF/NW25 3-way tee flange for secure vacuum connection. Now you can hook up multiply vacuum ovens to one pump, or multiply pumps to one oven to draw a faster and deeper vacuum. Compatible with the following products from Across International: Vacuum ovens…

One piece stainless steel KF25/NW25 to 3/8" hose barb adapter for secure vacuum connection. Compatible with the Ai 2.5, 7.2 cfm and Welch 2.3 cfm vacuum pumps, offered by Across International.,/p>

M ade with solid PTFE for air tight vacuum work, one of the highest quality products you can find in the market.

Synthware distillation adapter with sealed in drip tip. Adapter is bent at 105 degrees. Standard taper top outer joint and lower inner joints. 

The Ai heavy wall short path distillation head with vacuum jacket. Features Heavy wall for durability Boiling flask and distribution ports Vacuum jacketed Five sets of vigreux Thermo probe port: 14/20 joints Recirculating fluid ports: GL-16 adapters Glass material:…

Thermometer adapter with PTFE body and Viton® O-ring for air tight vacuum work. Features Adapter has a threaded polypropylene screw cap on top with an inside O-ring for depth adjustment of 6-7mm for straight stem thermometers, glass tubing and other items Rotating the extracting…

Synthware vacuum take-off adapter with drip tip. The upper outer and lower inner standard taper joints are the same size. 

Synthware thermometer adapter with a 5 degree offset and a serrated hose connection for vacuum. Joints are standard taper.

Ai 24/40 standard taper joint, heavy wall cow type distribution adapter, with three receivers 45° apart, and one 3/8" hose barb vacuum port.

Ai 24/40 standard taper joint, heavy wall single cow distribution adapter, with one 3/8" hose barb vacuum port.

Ai glass 3/8" hose barb tee adapter. Glass material: high borosilicate glass 3.3. Glassware does not have warranties. Glassware may have minute blemishes that will not affect the function.

GL14x5 GL14 chilling fluid or vacuum connector with sealing gasket, pack of 5. Fits some models of our glass condensers of SolventVap rotary evaporators and glass jacketed reactors. GL18x5 GL18 chilling fluid or vacuum connector with sealing gasket, pack of 5. Fits our SolventVap rotary…

Synthware distillation adapter with a 10/18 standard taper outer joint for a 76mm immersion thermometer. The adapter has a standard taper top outer joint and inner joints for the bottom and side.

1/2" high-temperature, ultra-conformable fiberglass rope, they’re flexible and will conform to uneven surfaces. The looser construction also makes them more likely to absorb liquids. Push them into the groove that’s commonly built into oven doors, furnaces, and tanks. These high…

Ai Thermometer Inlet Adapter with Sealing Gasket.

A vacuum-tight seal is created with the open top compression cap and FKM o-ring to allow adjustable immersion of thermometers Cap is suitable for use to 150 °C To use it as a septum port, just replace the o-ring with a PTFE-lined septum Supplied with one FKM o-ring and one 410119…

Synthware combination adapting connector with a top spherical socket joint and a lower standard taper inner joint.

Short Path Distillation Head with 24/40 flask joints and 10/30 thermometer port. Distillation head is manufactured from high quality 3.3 borosilicate glass and features a condenser coil and three 1/4" hose nozzles, two for condenser and one for vacuum.

KF/NW25 flange centering ring.

Synthware distillation adapter bent at 75 degrees. Both ends are standard taper inner joints and are the same size.

One 3.3 feet flexible stainless steel bellow with KF/NW25 flange connections, two aluminum wing nut flange quick clamps, and two centering rings. Compatible with the following products by Across International AccuTemp and Elite series vacuum ovens EasyVac 9 cfm vacuum pumps …

Premium quality stainless steel KF/NW25 4-way cross flange for secure vacuum connection. Now you can hook up multiply vacuum ovens to one pump, or multiply pumps to one oven to draw a faster and deeper vacuum.

Stainless steel KF25/NW25 to flare 3/8" adapter for secure vacuum connection. Compatible with all AI vacuum ovens with KF/NW25 vacuum connection.

Synthware U-shaped adapter. With standard taper inner joints at both ends.

Synthware connecting adapter is a 3-way adapter used for connecting three vessels. It has two top outer joints and a lower inner joint, all being the same size.