Quartz, rectangular aperture 6 x 3 mm, M6 threaded inlet and outlet ports, Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers. Application: For UV-Vis & UV-Vis-NIR Systems This product is only available to U.S. Domestic Customers. For…

PTFE lid, self-masking black walls. Application: For Cary 50/60/100/300/4000/5000/6000i This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Cylindrical Cells End windows fused to cylindrical body, of far UV silica, range 170 to 2,600 nm With Teflon stopper; 10 mm and 20 mm have single neck, longer sizes have 2 necks Light path length and minimum sample volume given in listings

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Optimize performance and maximize efficiency with supplies for the sample handling accessories used with 8453/8454 UV Systems. These ensure the perfect fit to ensure the optimum productivity and reduced errors caused by manual cell handling. Application: Accessory Supplies for 8453/8454 UV…

Semi-micro and micro cells have an inner width of 4 mm to 2 mm. The thickness of the base is 9 mm. All semi-micro and micro cells are for use with spectrophotometers having a beam height of 15 mm. For applications with a wave length range of interest in the visible range use our low cost Agilent…

The Agilent Technologies UV-visible calibration certified standard is suitable for use with specular reflectance measurement at 7 degree angle of incidence. It is certified to be NIST-traceable. Application: For Specular Reflectance Measurement at 7 degree Angle of Incidence, NIST-Traceable…

Allows transmittance measurements of solid samples at various incident angles. The sample can be positioned through 360 degrees to the incident beam and is selectable to 1 degree. Application: For External Diffuse Reflectance Accessory (DRA) For Agilent Cary 4000/5000/6000 UV-Vis This product is…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Polyethylene Fits most standard 10 mm cuvettes Flexible fins on 8495V27 caps allow tight fit with 10 mm cuvettes from most other manufacturers.

Caps for Ultra-Micro cuvettes Cuvette rack

The Agilent Technologies holmium oxide/didymium glass filter kit is used for the elimination and removal of very fine and small particles that is normally not filtered through regular filter paper. This product is only available to U.S. Domestic Customers. For research use only, not to be…

Matched pair, stoppered with PTFE stopper supplied, self-masking black walls, z height 20mm, 2/pk. Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies certified diffuse reflectance wavenumber standard is suitable for use in spectrometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Until recently, flow-through cells had measuring chambers that were either rectangular or circular in shape. These shapes were dictated by limitations in the manufacturing process and did not offer the best geometry for clean flushing and reduction of contamination. Now Agilent has developed new…

supplied with 1 PTFE stopper, Suits all Agilent UV-Vis spectrophotometers. Requires a cylindrical cell holder. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

BRAND plastic cuvettes are an excellent choice for most spectrophotometry applications in the visible range. Manufactured from polystyrene (PS), they provide accurate, reliable results, even at wavelengths as low as 300nm. BRAND plastic cuvettes are compatible with most spectrophotometers and…

The Agilent Technologies color standard is suitable for use in spectrometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent offers replacement tubing spares and kits for the Cary UV-Vis spectrophotometer systems. These allow you to replace peristaltic pump tubing and inlet/outlet connections for flow cells to help you keep your system operating at peak performance. This product is only available to U.S.…

M6 threaded inlet and outlet ports, inlet/outlet tubes 400 mm length, z height 20mm. Compatible with Agilent Cary 100/300 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The needle should be replaced when it becomes bent, burred or blunt. The needle seat should be replaced when it is leaking or plugged. You should suspect a leak if you notice a trail of buffer crystals on the needle seat. The needle seat can become blocked if the sample contains particulates, as…

The Agilent Technologies neutral density filter kit is suitable for the purpose of minimizing the amount of light from entering the glass lens thus nullifying the effects of density. This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Quartz, stoppered with PTFE stopper supplied, top section of the cell features two self-masking black walls and two translucent side walls, The sample compartment optimizes the alignment of the sample for maximum sensitivity. Sample is easily inserted into and retrieved from the cell using a…

The beam size is ~ 3 mm diameter at the transmission position and 3.5 mm tall by 1.5 mm wide at the reflectance position. Application: For External Diffuse Reflectance Accessory (DRA) For Cary 4000/5000/6000. Consists of an Iris, Mirror Assembly, & Three Lens Options to Focus the Beam to a Smaller…

Optimize performance and maximize efficiency with supplies for the sample handling accessories used with Cary UV systems. These ensure the perfect fit to ensure the optimum productivity and reduced errors caused by manual cell handling. Application: For Cary 4000/5000/6000i This product is only…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Tubing, peristaltic pump kit for the Cary Routine Sampler Accessory. Includes silicon pump tubing and fittings. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent offers replacement tubing, fittings and kits for the 8453 and 8454 UV-Vis spectrophotometer systems. These allow you to replace peristaltic pump tubing, inlet/outlet connections for flow cells and dissolution test systems to help you keep your system operating at peak performance. Cell…

Holds 12 glass, silica or plastic disposable cuvettes (external dimensions 12.5 x 12.5 mm) Permits easy viewing of solution color to be measured Helps prevent breakage Dimensions: Approximately 6 3/4 x 2 x 1/2”H

Quartz, stoppered with PTFE stopper supplied, top section of the cell features two self-masking black walls and two translucent side walls, The sample compartment optimizes the alignment of the sample for maximum sensitivity. Sample is easily inserted into and retrieved from the cell using a…