Synthware rotary evporator anti-splash trap with extra coarse fritted disc. Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. the frit reducesfoam from being carryover. With upper outer and lower inner standard taper joints.

Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. With upper outer and lower inner standard taper joints.

Adapter is placed above flask to prevent carry-over of reactions which have a tendency to foam. With top outer and lower inner standard taper joints.

Premium quality stainless steel KF/NW25 3-way tee flange for secure vacuum connection. Now you can hook up multiply vacuum ovens to one pump, or multiply pumps to one oven to draw a faster and deeper vacuum. Compatible with the following products from Across International: Vacuum ovens…

High quality one-piece stainless steel KF16/NW16 to KF25/NW25 flange adapter for secure vacuum connection. Compatible with Agilent IPD-3 2.1 cfm scroll pumps, Welch 1400N 0.9 cfm pumps and Welch 2163 6.1 cfm diaphragm pumps.

Thermometer adapter with PTFE body and Viton® O-ring for air tight vacuum work. Features Adapter has a threaded polypropylene screw cap on top with an inside O-ring for depth adjustment of 6-7mm for straight stem thermometers, glass tubing and other items Rotating the extracting…

Synthware distillation adapter with Kjeldahl trap. With two standard taper inner joints that are parallel and at a 75 degree angle to the connecting tube. Distance between joints is approximately 200mm.

Synthware vacuum take-off adapter with drip tip. The upper outer and lower inner standard taper joints are the same size. 

FVB-25-10 Premium flexible stainless steel vacuum bellow (3.3 feet) with KF/NW25 flange connection for high vacuum operations. Compatible with the following products by Across International AccuTemp and Elite series vacuum ovens EasyVac 9 cfm vacuum pumps, CleanVac series scroll pumps, SuperVac…

Dual trap assembly for use with AF-0060 or AF-0061 manifolds. Pre-trap (B) is 51mm OD x 250mm long with 28/15 polished socket joints to connect the line shut off adapter (A) to the main trap stopper assembly (C) which has 28/15 o-ring ball joints. The main trap (D) is constructed using a 57mm flat…

Ai Thermometer Inlet Adapter with Sealing Gasket.

Synthware distillation adapter with sealed in drip tip. Adapter is bent at 105 degrees. Standard taper top outer joint and lower inner joints. 

One piece stainless steel KF25/NW25 to 3/8" hose barb adapter for secure vacuum connection. Compatible with the Ai 2.5, 7.2 cfm and Welch 2.3 cfm vacuum pumps, offered by Across International.,/p>

Synthware thermometer adapter with a 5 degree offset and a serrated hose connection for vacuum. Joints are standard taper.

A vacuum-tight seal is created with the open top compression cap and FKM o-ring to allow adjustable immersion of thermometers Cap is suitable for use to 150 °C To use it as a septum port, just replace the o-ring with a PTFE-lined septum Supplied with one FKM o-ring and one 410119…

M ade with solid PTFE for air tight vacuum work, one of the highest quality products you can find in the market.

Synthware rotary evaporator trap. Anti-climb design. Trap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser.

KF/NW25 flange centering ring.

Ai 24/40 standard taper joint, heavy wall cow type distribution adapter, with three receivers 45° apart, and one 3/8" hose barb vacuum port.

Across International PTFE sealing sleeve for air tight vacuum operation. Designed with higher and lower bumps to enhance sealing. No-lip top allows you to put on your keck clip securely. This sleeve will increase vacuum level on your glassware setup, allowing you to achieve better results.

Similar to CG-1032, but with joints of non-similar sizes at the upper and lower portion of the adapter. Dimensions are the same as the CG-1032.

The Ai heavy wall short path distillation head with vacuum jacket. Features Heavy wall for durability Boiling flask and distribution ports Vacuum jacketed Five sets of vigreux Thermo probe port: 14/20 joints Recirculating fluid ports: GL-16 adapters Glass material:…

Short Path Distillation Head with 24/40 flask joints and 10/30 thermometer port. Distillation head is manufactured from high quality 3.3 borosilicate glass and features a condenser coil and three 1/4" hose nozzles, two for condenser and one for vacuum.

Adapter used to construct a simple moisture trap. Add a condenser to the top outer joint and a graduated funnel to the lower inner joint. Adapters with larger center to center spacing can be used with process reactors and larger flasks up to 50L.

KF25/NW25 premium grade 316L stainless steel angle flange with alumimum valve for ultra durability, great for all sorts of high vacuum operations. Grade 316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316…

Ai glass 3/8" hose barb tee adapter. Glass material: high borosilicate glass 3.3. Glassware does not have warranties. Glassware may have minute blemishes that will not affect the function.

Synthware distillation adapter with a 10/18 standard taper outer joint for a 76mm immersion thermometer. The adapter has a standard taper top outer joint and inner joints for the bottom and side.

Micro impinger designed for sampling of small volumes of air at low jet velocity, as per EPA Method 6. Impinger bottle is graduated from 5 to 30mL in 5mL subdivisions. Both the bottle and stopper have 24/40 standard taper joints. The nozzle being replaced with an extra coarse fritted gas dispersion…

Synthware combination adapting connector with a top spherical socket joint and a lower standard taper inner joint.

1/2" high-temperature, ultra-conformable fiberglass rope, they’re flexible and will conform to uneven surfaces. The looser construction also makes them more likely to absorb liquids. Push them into the groove that’s commonly built into oven doors, furnaces, and tanks. These high…

Outer joint having a tubulation sealed at the midpoint of the ground portion, and a corresponding hole drilled in the inner joint permitting venting of the side tube when the inner joint is turned to the proper position. Both of the 19/38 sizes are compatible with Buchi Rotary Evaporators. Part…

Ai 24/40 standard taper joint, heavy wall single cow distribution adapter, with one 3/8" hose barb vacuum port.