This miniature DC motor is designed for experiments using low starting voltage (4.5V) and current (70mA). Speed: 1000-5000 RPM. Motor is approximately 34mm long x 24mm in diameter. Shaft size is 10mm long x 2mm in diameter. Includes soldered-on 7" lead with alligator clips.

This basic breadboard kit contains all of the basic connecting parts to start exploring circuit design. The kit includes a variety of connecting cord sizes and two breadboards. All that is required is to provide components such as resistors, LEDs, or capacitors. Kit Contents: …

This device can be used as a classic standard calorimeter or as an electric calorimeter. Made of aluminum and plastic, the calorimeter has a diameter of 10cm, height of 11cm, liquid capacity of 175ml, and a heat capacity of 25J/°C. Electrical requirements are 6V DC, up to 2A.

An insulated snap-on connector with 15cm red and black leads.

Flexible 18swg stranded wire cord with two way stackable banana plugs at both ends.

This 3V conductivity tester demonstrates the electrical properties of various liquids. The item consists of a molded plastic lamp socket mounted on a base with 2 binding posts for connecting a wire cord. It comes complete with bulb, glass tumbler, and instruction manual.

Solar motor is specifically designed for experiments using low starting voltage (0.5V) and current (25mA). Speed: 1000-5000 RPM. Motor is approximately 38mm long x 24mm in diameter. Shaft size is 8mm long x 2mm in diameter. Includes soldered-on 4" wire leads.

The 630-point solderless breadboard is built with high-quality construction that can withstand repeated use. It includes color coordinates that are screen-printed for easy reference. This breadboard is perfect for investigating circuit designs and prototyping. It accepts most electronic components…

This economical seven piece kit lets you demonstrate the conversion between different forms of energy. It includes four devices for generating electrical energy from mechanical motion (hand generator), chemical energy (batteries), light (solar energy), and wind (windmill) and three devices for…

Friction Rods are 12"; long unless noted. Excellent for demonstrating static electricity

Knife Switches for low voltage experiments (less than 36V) with plastic bases. These items are available with either thumbscrew or spring binding posts.

Our meters are mounted in black plastic cases. Meters have a scale length of 75mm, offer +/- 2.5% accuracy and come with 5-way binding post and external calibrating screw. Meters are not protected against prolonged or significant overload. Stackable for storage.

This apparatus helps students to observe energy transfer and conversion and investigate the systems that keep homes comfortable and safe. The suggested activities below will: explore the relationship between parallel circuits and current; understand how thermostats and circuit breakers operate; and…

Fahnestock Clips supplied in packs of ten.

Build your own series circuit using the handy Create-A-Circuit-Kit. It comes complete with a "D" cell battery holder, a knife switch, two miniature light bulbs, two lamp holders, and four connector cords. Instructions are included.

This electroscope is housed in a 250ml borosilicate glass flask with a metal rod attached to a rubber stopper. A pair of aluminum leaves is suspended from an alligator clip. The knob on top of the rubber stopper accepts a charge. When the charge enters the flask, the aluminum leaves separate. Also…

Flexible, 18swg stranded wire cord with alligator clips at both ends. Alligator clips have protective vinyl sheath.

This comprehensive kit allows students to plot equipotential lines in an electric field between two electrodes held at different electric potentials. A simple setup keeps electrodes partially immersed in water containing an electrolyte, allowing a small current to flow between the…

The United hand held generator offers features and quality similar to much more expensive brands currently offered in the science education market. This 6V DC Generator can deliver up to 400mA current. The generator comes equipped with a polarity coded plug in lead with alligator clips. The clear…

The Solar Kit offers a convenient introduction to the conversion of solar light energy into electrical energy. The conversion is carried out by a photoelectric panel, and three “consumers” are included to demonstrate the use of the electrical energy; an LED shows the conversion back to…

We offer a superior quality Wimshurst machine for demonstrating high voltage electric charges. Our unit features acrylic rotating disks, good quality foil strips and brushes, insulated cylindrical capacitors, and a durable plastic platform. Guaranteed to produce large sparks for easy…

Our meters are mounted in black plastic cases. Meters have a scale length of 75mm, offer +/- 2.5% accuracy and come with 5-way binding posts and an external zero-setting screw. Meters are not protected against prolonged or significant overload. Stackable for storage.

A simple but effective device for demonstrating Lenz's Law using eddy currents induced in the wall of a copper tube by a falling magnet. The demonstrator consists of a 12"; long copper tube and two apparently identical metal slugs with rubber end caps. One slug is plain steel, and falls…

Telegraph key, mounted on a solid plastic base, measuring 11cm x 5cm.

This sturdy electroscope features a metal case with front and rear glass windows for preventing air currents from affecting the deflection of the leaves. Leaves are gold and aluminum. Leaf support rod is held in place by an insulating plastic sleeve. A graduated scale is also provided for measuring…

Operates on 1.5V or 3V DC. Speed: 7000-11000 RPM. Motor is 40 MM long x 20Mm in diameter. Shaft size: 2 MM diameter x 8 MM long.

Convenient fully assembled battery set holds up to 4 D-size batteries. Five color-coded binding posts on the base for easy, safe, and reliable connections to hook-up cords provide outlets for 1.5V, 3V, 4.5V or 6V supply voltages. Superior construction¡Xrobust, molded battery holders for secure…

Suitable for miniature base lamps. Accepts all replacement bulbs listed on this page. Plastic base, with brass screw type receptacle and two terminals. Miniature Bulbs for use with lamp boards and lamp/bulb holders.

Our meters are mounted in black plastic cases. Meters have a scale length of 75mm, offer +/- 2.5% accuracy and come with 5-way binding posts and an external zero-setting screw. Meters are not protected against prolonged or significant overload. Stackable for storage.

Ideal for demonstrating series and parallel circuits. Lamp Boards are supplied with spare bulbs and an activity guide.

This motor generator demonstrates both shunt wound, and series wound connections for motors and generators, and can be used with AC or DC supplies. Motor is easily dismantled to change the configuration. Requires Low voltage AC/DC Power Supply (not included)

This kit includes an air core solenoid and a current balance for demonstrating and measuring the small force experienced by a conductor carrying an electric current in a magnetic field. To run the experiment, one half of the current balance is placed inside the solenoid. The other half has an…