QUANTOFIX Multi stick for aquarium owners are the semi-quantitative test strips for the determination of the total hardness (Ca 2+ , Mg 2+ ), carbonate hardness (HCO 3 -, CO 3 2-) and the pH value of aquarium water. Measuring range: 0-6.3-12.5-18.8-25.0-31.3 °e (total hardness)…

QUANTOFIX Phosphate semi-quantitative test strips for the determination of Phosphate. Measuring range: 0-0.5-2-5-10 mg/L

Single Roll Hydrion Quat Check Test Paper provides a simple, reliable, and economical means to measure the concentration of Quaternary Sanitizers, specifically Alkyldimethylbenzyl ammonium compounds, Rocall II, and Hyamine 3500. The Color matches within the Hi Range cocentration at…

The New Dual Range QAC Test Strip takes care of ALL of your testing needs on ONE STRIP! Whether checking the concentration of your QAC solution or checking to ensure complete removal from treated surfaces, the new Dual Range QAC Test Strip DOES IT ALL! Chemically-treated test strips change…

Double Roll Hydrion Quat Check Test Paper provides a simple, reliable, and economical means to measure the concentration of Quaternary Sanitizers, specifically Alkyldimethylbenzyl ammonium compounds, Rocall II, and Hyamine 3500. With color matches within the Hi Range of 0-200-400-600-800-1000ppm…

VISOCOLOR Powder Pillows free Chlorine reagent set for photometric determination of free chlorine. Ideal for pool or drinking water analysis. Measuring range: 0.03-6.00 mg/L Cl2

QUANTOFIX Ascorbic acid semi-quantitative test strips for the determination of vitamin C in solutions. Measuring range: 0-50-100-200-300-500- 700-1000-2000 mg/L vitamin C

QUANTOFIX Nitrite 3000 semi-quantitative test strips for the determination of high concentrations of nitrite (NO 2) in solutions. Measuring range: 0-0.1-0.3-0.6-1-2-3 g/L NO2-

VISOCOLOR Powder Pillows Silica LR reagent set for photometric determination of Silica in the low range. Ideal for boiler feed water analysis of high pressure boilers. Measuring range: 0.02-2.10 mg/L SiO2 Set of Molydate-, Citric acid- and Ascorbic acid reagent

The cyanide test is suitable for monitoring cyanide ions in the effluent from electroplating works. Only readily dissociable cyanides are detected.

Strips chemically treated with starch and cadmium iodide measure total chlorine to determine the strength of sanitizers in cleaning solutions. Furnished in plastic vial of 200 1/4” x 3 1/2” strips, with color comparison chart, which has three standards 50, 100 and 200 ppm

The Insta-Test Low Range Hydrogen Peroxide Test Strips is a convenient way to quickly measure peroxide levels in water with fast dip and read results. Range and sensitivity is 0, 1, 3, 10, 30, 50 ppm.   Applications: Drinking Water, Industrial Water Boiling and Cooling, Laundry…

QUANTOFIX Silver semi-quantitative test strips for the determination of silver in fixing baths. Measuring range: 0-1-2-3-5-7-10 g/L Ag+

The Iodine test papers are a convenient way to test Iodine in water with fast results. Range and sensitivity is 0, 30, 60, 120, 180 ppm.

QUANTOFIX Total iron 100 semi-quantitative test strips for the rapid and easy analysis of Iron directly on-site. Measuring range: 0-2-5-10-25-50-100 mg/L Fe2+/Fe3+

QUANTOFIX Sulphate semi-quantitative test strips for the determination of sulphate in solutions. Measuring range: 200->400->800->1200- >1600 mg/L SO42-

For detection and semi-quantitative determination of cations and anions in solution Furnished in aluminum vials with plastic snap cap Desiccant pack is provided inside cap Each strip contains reagents, buffers and masking chemicals necessary to perform the test. All but sulfate…

Chlorine containing disinfectants are most widely used. They are applied particularly to disinfect drinking water and swimming pool water.

Method: colorimetric with test strips 10 - 40 - 80 - 180 - 400 mg/l SO₃ 2- MQuant™ Storage class: 10 - 13 Other liquids and solids Storage: Store at +2°C to +8°C. The sulfite test is suitable for food analysis, particularly in the testing of wine and…

QUANTOFIX Glutaraldehyde semi-quantitative test strips for the determination of glutaraldehyde. Measuring range: 0-0.5-1-1.5-2-2.5 mg/L

QUANTOFIX chlorine dioxide 15 semi-quantitative test strips for the determination of chlorine dioxide. Measuring range: 0-0,25-0,5-1-3-5-10-15 mg/L ClO2

Low Range, 0-2500 ppb. 25 test strips.

QUANTOFIX Peroxide 100 semi-quantitative test strips for the determination of hydrogen peroxide (H 2 O 2 ) and peroxides in solutions. Measuring range: 0-1-3-10-30-100 mg/L H2O2

Caused by the presence of carbonates, bicarbonates, hydroxides, and other dissolved salts, alkalinity is important to drinking water, food, and beverage processors; boiler operators; and aquatic biologists. Contains 50 tests. Easy to use, disposable, and inexpensive A great way to obtain…

Room temperature incubation Easy to do Results in 48 hours Bacteria Check (3108U83) is a presumptive Presence-Absence test for Coliform bacteria based on Lactose Fermentation as described in Standard Methods and by the USEPA. Color change from purple to yellow afer 48 hour room…

The Insta-Test Total Chlorine/pH/Hardness and Iron test kit combines the best of both worlds. The kit includes 25 quick, easy and accurate tests using a simple dip-and-read formulation. The strips are packaged in a unique hinged, waterproof PopTop bottle with a desiccant liner that protects the…

Dip and read No mixing sample and reagent Economical, quick results Patented tests are quick alternatives for food or environmental testing. Supplied in bottles of 50 loose strips or packages of individually wrapped strips Tests for lead and other heavy metals

Sensitive, safe to use - SenSafe No reagent preparation time Easy to do, quick results These test strips are an excellent alternative to wet chemical chlorine tests. The unique indicator (TMB) is reactive only to free chlorine; therefore, no interference from monochloramines occurs.…

3 ranges of PAA test strips available covering low (0-50 ppm), medium (0-160 ppm) and high (0- 1,000 ppm) range concentrations The Insta-Test® 3000 test strips determine peracetic acid concentrations from 0-160 ppm. The test has a 10 second development time. The container has a desiccant liner…

Insta-Test® strips are available to perform checks for water quality factors. Test strips are a quick way to monitor water without having to use reagents.

VISOCOLOR Powder Pillows Nitrite reagent set for photometric determination of Nitrite. Ideal for drinking water, surface water and waste water analysis. Measuring range: 0.01-0.30 mg/L NO2-N __UN 3316 Chemical kit 9 II 0.015 KG ADR/GGVSEB M11 (E) ADR 3.3.1/251 PAX 960 10…