LaMotte Portable Water Quality Test Kits
-
Detergent Test Kit
LaMotte4507 Drop Count Method For determining anionic forms of detergent One drop equals 1.0 ppm detergents; range approximately 0 to 5.0 ppm Sufficient for 60 tests at 5.0 ppm
-
Laundry Control Test Kit
LaMotteSeven important factors for monitoring incoming water supplies, break, suds and bleach operations; also rinse and sour operations. The pH (alkaline) test uses a LaMotte Octa-Slide 2 Comparator. The alkalinity tests, chlorine bleach and hardness test utilize dropper pipet test methods. Reagents are…
-
POOL MGR. Kit
LaMotteThe special rugged POOL MGR. kit series is for the public pool operator. The precise Octa-Slide 2 comparator system is used to comply with regulatory standards. The POOL MGR. series includes diagrammed instructions, saturation index calculator, water quality handbook, and the reliable Octa-Slide 2…
-
Kit Contains: 100 Chlorine DPD #1 Tablets 50 Phenol Red Tablets 3 Test Tubes, 2.5, 5, 10 mL, plastic w/ caps 1 Chlorine/Bromine Octa-Slide 2 Bar 1 Phenol Red Octa-Slide 2 Bar, pH 6.8-8.2 1 Octa-Slide 2 Viewer
-
Come in a 60 mL quantity, this performance check standard is for inspection and monitoring water quality.
-
LaMotte Nitrate #2 CTA Tablet
LaMotteThe LaMotte nitrate #2 CTA tablet is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
Silica Test Kit
LaMotteOctet Comparator For determining silica in natural and industrial waters Employs modified APHA Method 425D Octet Comparator has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0 and 10.0 ppm silica Sufficient for 50 tests
-
LaMotte Liquid Reagent
LaMotteLaMotte calcium hardness reagent - 30 mL is a liquid reagent for swimming pool water testing.
-
Urban Water Test Kit
LaMotteTest tap water from any source and study the impact of urban water on the city’s environment. "Wet in the City," a hands-on kit, introduces the basic concepts of water chemistry–even to kids as young as third grade! Non-hazardous TesTabs® make "Wet in the City" an…
-
Nitrate Nitrogen Test Kits
LaMotteThis kit tests for nitrate nitrogen using the LRC Comparator. Range/sensitivity is 0, 0.2, 0.4, 0.6, 0.8, 1.0 ppm NO3--N. Applications: Food and Beverage, Environmental Education, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater
-
Nitrate Nitrogen Test Kit
LaMotteThis Nitrate Nitrogen Test Kit tests for nitrate nitrogen levels using cadmium reduction which undergoes diazotization/coupling to form a pink color. Levels are determined using the Octa-Slide 2 comparator Range and sensitivity is 0.25, 0.5, 1.0, 2.0, 4.0, 6.0, 8.0, 10.0 ppm…
-
QAC Test Kit
LaMotteDirect Reading Titrator For determining QAC (quaternary ammonium compounds) in cooling waters and sanitizing solutions Range of 0 to 500 ppm QAC in 10 ppm increments Sufficient for 50 tests at 500 ppm
-
Phosphonate Test Kit
LaMotte7625 CAS Dropper Pipet Sufficient for 50 tests at 20 ppm 1 drop = 1.25 ppm HEDP 1 drop = 1.4 ppm PBTC Chromazurol S method may be used for Dequest, Bayhibit, Belcor 575 and Belsperse 161 phosphonates. Indicator changes from yellow to pink at the pH ideal for the reaction, then…
-
Peracetic Acid Kit
LaMotteThe hydrogen peroxide equivalence is 1 drop = 50 ppm. The peracetic acid equivalence can be modified to test different concentrations by using a different sample size. The result is a 1 drop = 6, 15, or 300 ppm equivalence.
-
Cyanuric Acid Kit
LaMotteThe Cyanuric Acid (Stabilizer) test kit measures Cyanuric Acid levels at 20, 30, 40, 50, 60, 80 and 100 ppm. The kit includes 50 Cyanuric Acid visual grade TesTabs® tablets that are added to a test tube. Once the tablet disintegrates then the analyst would look down through the test tube and…
-
Reagent Refill Sulfide Test Kit
LaMotteThe LaMotte model CC-PS reagent refill sulfide test kit is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is easy to handle and convenient to use.
-
Alkalinity Test Kit
LaMotteApplications: Drinking Water, Industrial Water Boiling and Cooling, Water and Wastewater This Alkalinity Test Kits uses a Direct Reading Titrator with standard acid to the phenolphthalein (P) and/or total (T) alkalinity endpoint. Range and sensitivity is 0–200 ppm as CaCO3 in 4 ppm…
-
-
Salinity Test Kit
LaMotteFor determining salinity (as chloride content) of water Employs modified APHA Argentometric method Range of 0 to 20 ppt salinity in 0.4 ppt increments Sufficient for 50 tests at 20 ppt
-
The LaMotte DPD chlorine secondary standard kit is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
Low Range Phosphate Test Kit
LaMotteThis LaMotte Phosphate test kit tests for low range Phosphate using the LRC Comparator. Range and sensitivity is 0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 ppm PO43-. Applications: Environmental Education
-
Caustic Test Kit
LaMotteApplications: Laundry and Sanitation This kit tests for caustic levels by adding drops of Barium Chloride solution to a sample where white precipitate will form if carbonates are present. Levels are then determined using the Phenolphthalein Indicator. Range and sensitivity is 1 drop = 0.1 or…
-
3119 Octet Comparator Method Color standards for 0.2, 0.4, 0.6 and 1.0 ppm NO3—N Color standards for 0.2, 0.4, 0.6 and 1.0 ppm PO4 Sufficient for 40-50 tests
-
Cyanuric Acid Test Tablets
LaMotteReplacement cyanuric acid test strip tablets. Used for Cyanuric Acid instrument grade test with Lamotte Kits.
-
Chloride Test Kits
LaMotteEPA-accepted method for NPDWR and NPDES Employs modified APHA Argentometric method Range of 0 to 50 ppm Cl in 1 ppm increments Sufficient for 50 tests Range of 0 to 200 ppm Cl in 4 ppm increments Sufficient for 50 tests at 200 ppm Employs Argentometric method
-
Chloride Test Kit
LaMotteThis kit tests for Chloride in fresh water samples using the Direct Reading Titrator method. Applications: Environmental Education, Aquarium and Fish Farming
-
Iron Test Kits
LaMotteOctet Comparator For determining total iron (dissolved, suspended and collodial) in natural waters Octet Comparator has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0 and 10 ppm iron Bipyridyl indicator Sufficient for 100 tests Octet Comparator For determining trace…
-
This kit tests for nitrate nitrogen using tablet reagents and the Octa-Slide 2 Comparator. Range/sensitivity is 0, 1, 2, 4, 6, 8, 10, 15 ppm NO3 - -N Applications: Drinking Water, Environmental Education, Food and Beverage, Industrial Water Boiling and Cooling,…
-
Sulfide Test Kits
LaMotte3322 Octa-Slide Comparator System For determining total sulfide Sufficient for 50 tests NPDES-EPA accepted Unit uses the Pomeroy methylene blue method for analysis. Total sulfide is determined using a color dye, which is added to an un-reacted sample until it matches a reacted…
-
Chlorine Test Kits
LaMotteDPD Tablet Octa-Slide (9859G42) Sufficient for 50 tests Employs DPD tablet method: EPA- accepted method for NPDWR Octa-Slide has color standards representing 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 and 3.0 ppm Cl Low Range Octet Comparator (9859H10) Employs DPD tablet…
-
Sulfate Test Kit
LaMotteOctet Comparator For determining sulfate in natural waters and waste waters Employs modified APHA turbidimetric method with barium chloride Has color standards representing 20, 40, 60, 80, 100, 120, 160, and 200 ppm sulfate, sufficient for 50 tests
-
Nickel Test Kit
LaMotteOctet Comparator For detection of nickel in waste effluents and water supplies Employs dimethylglyoxime method Octet Comparator has color standards representing 0.5, 1.0, 2.0, 4.0, 5.0, 7.5, and 10.0 ppm nickel Sufficient for 20 tests