Like arium® pro DI, the arium® pro UV features three-stage purification technology. Yet it additionally uses photooxidation to remove organic components. With two different wavelengths, the horizontally positioned UV lamp (185 254 mm) prevents microbial growth and reliably reduces…

Count on the Thermo Scientific Aquanex Ultrapure Water Purification System for convenience, flexibility and reliable water purity. With an intuitive touch screen interface and easy-access consumables, you can spend more time on your research and less time maintaining your equipment. The Thermo…

All GenPure systems exceed international standard ASTM Type I, ISO 3696 Grade 1, ASTM D1193 and CLSI-CLRW Integrated feed water monitoring An additional measuring cell monitors feed water conductivity. Any exceeding of the limiting value is immediately displayed maximizing cartridge…

The Hydra DI Series is a pre-assembled cartridge system that provides deionized water using a staged filtration process. Water purification is provided using a 3-step process. Stage (1) removes particles greater than 5 micron, chlorine, and organics. Stages (2 & 3) are deionizers…

Two types available Can be used in either single or duplex cartridge operation mode Model 3923D40 has a faucet adapter, 3 ft. hose and barb fittings. Model 3923D50 has 1/4in. tube threaded fittings for more permanent connection to a water line. Recommended line input pressure is 30 psi.

LabStrong cartridges are comparable to the Thermo Scientific Barnstead cartridges. Side-by-side testing shows fantastic results for purity and longevity. The LabStrong water purification cartridge is used with the Thermo Scientific Barnstead B-Pure*, E-Pure*, NANOpure*, NANOpure II and NANOpure…

Designed for non-pressure applications Utilizes the same resins used in PCS cartridges Housed in 100% virgin polypropylene Include 3/8” barbed hose connections on each end All cartridges except 3922J32 and J27 contain dyes which change color when resin is exhausted.…

WaterPro® BT System produces both RO-purified and Type I water packaged in a compact all-inone benchtop design For laboratories needing 1-10 liters per day, the WaterPro BT System, delivers ultrapure Type I*, up to 18.2 megohm-cm at a typical rate of >0.5 liter per minute** at inlet…

Manufactured in the United Kingdom, the QWS4 230V water still combines high performance and reliability with value for money. This new Quickfit® water still features a high quality Pyrex® glass boiler and condenser. Output capacity 4Liters/Hour pyrogen free* single distilled water …

Bench, floor or wall-mounted models for efficient production of high-quality distilled water Feedwater pre-heated in condenser allowing for energy conservation Space-saving horizontal condensers Energy saving double-walled evaporator Typically lasts up to 20 years, metal…

This PYREX® cyanide distilling apparatus is used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation and absorbed in a scrubber containing a sodium hydroxide solution. Tygon® tubing…

The Alto™ provides ultrapure water on demand. The Alto systems are fed from a pre-treated supply (Puro, Geno or your existing ring main) and produce ultrapure water at 18.2 MΩ-cm, Type 1 swiftly on demand.  The integrated dispenser or optional remote dispenser can provide ultrapure…

Description External Includes fresh and waste water containers (20 L), cabling, and pump

Vivaspin are the optimal solution for any concentration or buffer exchange application covering volumes from 100 µl up to 20 ml for fast and safe sample treatment. The patented vertical membrane design and thin channel filtration chamber minimizes membrane fouling and provides high speed…

With outer Standard Taper joint at the top and an inner-sealed through drip-tip joint at the bottom Bent at 105° angle The serrated sidearm is 10 mm O.D. drip-tip at the bottom extends about 20 mm below the lower end of the joint

For Milli-Q® systems. Contains Organex & Ionex Resins for trace levels of organics and ions.

All in One! The Smart2Pure™ Pro system is a compact system which converts tap water to into ASTM Type 1. The Smart2Pure Pro UV/UF 16 LPH offers the choice of a 30 L or 60 L reservoir for customizable storage capacity and ability to dispense both ASTM Type 1 and Type II water. Lasting…

The LabStrong 410671LS Mega-Pure Gasket 4 Pack is comparable to the Thermo Scientific™ Barnstead™ 410671. The gaskets are designed for use in the Thermo Scientific Barnstead Mega-Pure Single (D1) and Dual (D2) Cartridge Deionizer Systems and the MP-12A Glass Stills. The economical and…

Water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals, and ultraviolet light for bacteria sterilization and TOC reduction. As water exits the system, a final filter removes particulates and bacteria to reach Type I water specifications.

Powerful performance Based on your requirements, choose from capacities of 3, 6 or 12L/hr Lasting economy Water purification progresses through independent cartridges with Aquastop quick connects for fast replacement. Module 1 - Combination of pretreatment and the reverse…

This product is designed to remove ionic and organic contaminates down to trace levels from DI pure water.

For laboratory pre-treatment up to 350 L per day for less critical applications such as glassware washing Supplied complete with a 30 L atmospherically-vented storage reservoir Microprocessor controlled allowing for fully-automatic operation; automatic flush Built-in pressure switch…

Deionizer Produces 19 to 38 liters per hour Can be used with any PCS cartridge - most often used with ULTRApure or high capacity-type Point of use polishing of pre-treated water or single stage treatment of tap water Equipped with direct reading purity meter Resistivity…

VPK Series Cartridge Equivalent Replacements for Barnstead systems. NEED ASSISTANCE? Click the 'Additional Info' tab to fill out a lab survey form.

The LabStrong CMX25LS Cleaning Syringe is comparable to the Thermo Scientific™ Barnstead™ CMX25 Cleaning Syringe. The cleaning syringe is designed for use with EASYpure™ II LF, EASYpure UV, EASYpure UV/UF, NANOpure™ Infinity and NANOpure DIamond™ water purification…

For HPLC, TOC, BOD analyses or other applications sensitive to even low levels of organics, kits with the organic-free cartridge are suggested Organic-free kits are designed to provide 18.3 megohm-cm resistivity type 1 reagent grade water with less than 20 ppb TOC carbon PCS style cartridges…

VP Series cartridges provide ultra high purity filtration for a variety of applications. Constructed of non-pigmented, virgin materials the spin welded construction provides the longest life and highest quality. Applications include deionization, submicron filtration, organics, chlorine, oxygen and…

Hydranautics SWC seawater desalination membranes are high productivity elements offering the highest levels of salt rejection and a consistently pure end product. Membrane formulations are designed to accommodate varying levels of seawater salinities worldwide with reliable field-proven…

Easy and economical high purity water Easy installation anywhere with hose or compression tubing Visual indicator of exhausted resin by color change High capacity compared to many other disposables - up to 1800 grains High flow rates up to 7.2 GPH Single or triple distillation water quality …

Protects the stored, distilled water against airborne impurities Replacement element only; requires Thomas number 0163A08 Vent Guard Assembly.

Product Dimensions (l x w x h) : 14.75x4.75x12.5in Merit Water Still (3915N02) Replacement Boiler